• The Korean Journal of Malacology
• /
• v.28 no.3
• /
• pp.187-196
• /
• 2012

Recently, for the purpose of constructing artificial ecosystem, the public aquarium and experimental mesocosm systems are receiving attention. To design and establish an aquarium and mesocosm system, there is need of several materials for simulating the environment, such as sediments, rocks, and plants. Expecially for sessile mollusks, there must be proper materials to which sessile invertebrates can adhere. Nowadays, many aquariums and mesocosm systems are using dead coral skeletons for sessile mollusks. This study was proceeded to have data on the effect of dead coral skeletons on water qualities with the experiment on the environmental factors. For this purpose, I made glass tank for experiment, chose two types of dead coral skeletons imported from the Indonesia and observed the change of water qualities and decomposition efficiency of TAN (total ammonia-nitrogen), nitrite ($NO_2{^-}$) and nitrate ($NO_3{^-}$). As a result, the lager the surface area was, the more TAN, nitrite and nitrate decomposition rate increased. In addition, coral skeletons covered with crustose algae and bacteria in the tank showed faster TAN, nitrite and nitrate removal rate and stabilization. Accordingly, this experiment suggested that dead coral skeletons could be used as a sub filter for the closed system as well as an adhering plate.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.7
• /
• pp.282-292
• /
• 2003

In this paper, we evaluate the performance of WCDMA reverse link receiver system with closed loop fast transmit power control (TPC). For fast power control, SIR must be measured precisely. We propose a new SIR measurement algorithm having a simple structure. The proposed algorithm uses unused OVSF code for interference power evaluation. The proposed SIR measurement algorithm is compared to the conventional SIR measurement algorithm in Ref.$^{［1］}$ under closed loop fast TPC. We adopted WMSA channel estimation filter with Κ=2 for mobile radio channel estimation and considered one slot TPC delay. Extensive computer simulation results show that the proposed algorithm using unused OVSF code reduces the required Ε$_{b}$ /Ι$_{0}$ at the BER of 10$^{-3}$ up to 0.9㏈ and has an improved TPC error performance compared to the conventional algorithm.

• Ocean and Polar Research
• /
• v.25 no.4
• /
• pp.493-501
• /
• 2003

Performance of a laboratory scale closed seawater recirculating aquaculture system was evaluated. Twenty-kg of korean rockfish (130 fish) with an average body weight of 153.8g was stocked. Over a 107-day culture period, fish reached final density of $51.7kg/m^3$ (initial density, $33.3kg/m^3$) on the basis of the culture tank volume. On a daily basis, added water amounted to 3.4% of the total water volume in the system. Total ammonia nitrogen (TAN) concentrations were below 1mg/l and nitrite nitrogen $(NO_2-N)$ concentrations were within the range of 1-3mg/l on most sampling days. TAN was removed from bead and sand filters and it was removed or produced in the sedimentation basin. Basically, $NO_2-N$ was removed in the bead and sand filters, while it was either removed or produced in the sedimentation basin. Nitrate nitrogen $(NO_3-N)$ was produced in the bead filters and removed from the sand filter and sedimentation basin. The foam fractionator performed well in the recirculating system. The maximal daily removal values for total suspended solids (755) and protein were 10.9g and 1.4g, respectively. Whole water quality parameters were within the levels commonly recommended for fish culture on most of the sampling days. However, further studies are needed to evaluate the commercial feasibility of this system because of the smallscale system used in present experiment. At least, the present study still provides some basic information for further studies of this kind of system.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.5
• /
• pp.43-49
• /
• 1997

Generally, echo cancelers of a TV conference system or a audio conference system are to carry out a real time processing in the case of the closed room having long reverberation time because the system requires much time to modify filter coefficients to environmental changes. Therefore this paper proposes a new subband adaptive filtering method using polyphase filter banks of MPEG(Moving Picture Experts Group) audio system to solve the problems. This method divides signal spectra of input and output into several frequency bands, and each band is adaptively filtered by using ES-NLMS (Exponential Step-Normalized Least Mean Square) algorithm. The optimal number of subband is determined by computational simulations. According to the results of simulation, ERLE of the subband model is 2dB smaller than general full band, calculation rate's of the subband model is decreased about 88%.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.168-180
• /
• 2018

In order to achieve the high quality output voltage of single-phase voltage source inverters, in this paper an Adaptive Complementary Sliding Mode Control (ACSMC) is proposed. Firstly, the dynamics model of the single-phase inverter with lumped uncertainty including parameter variations and external disturbances is derived. Then, the conventional Sliding Mode Control (SMC) and Complementary Sliding Mode Control (CSMC) are introduced separately. However, when system parameters vary or external disturbance occurs, the controlling performance such as tracking error, response speed et al. always could not satisfy the requirements based on the SMC and CSMC methods. Consequently, an ACSMC is developed. The ACSMC is composed of a CSMC term, a compensating control term and a filter parameters estimator. The compensating control term is applied to compensate for the system uncertainties, the filter parameters estimator is used for on-line LC parameter estimation by the proposed adaptive law. The adaptive law is derived using the Lyapunov theorem to guarantee the closed-loop stability. In order to decrease the control system cost, an inductor current estimator is developed. Finally, the effectiveness of the proposed controller is validated through Matlab/Simulink and experiments on a prototype single-phase inverter test bed with a TMS320LF28335 DSP. The simulation and experimental results show that compared to the conventional SMC and CSMC, the proposed ACSMC control strategy achieves more excellent performance such as fast transient response, small steady-state error, and low total harmonic distortion no matter under load step change, nonlinear load with inductor parameter variation or external disturbance.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.530-533
• /
• 2002

We present a case of The Miller Fisher Syndrome (MFS), showing a remission during a recently developed noninvasive therapy. Two weeks after an appearance of cough and fever, a 35 years old Japanese male developed diplopia, ataxia and numbness of his fingers and toes. He was diagnosed as MFS, and a fixed dose of prednisolone acetate (60mg/day) was administered for 3 months, but little improvement was observed. In addition to this administration, we tried 20 minutes of Photic Feedback (PFB) treatment daily for 40 days. The PFB system detects brain waves from the subject's forehead, and extracts alpha waves by the band-pass filter with a center frequency set at 10.0Hz. It also simultaneously modulates the augmentation of a red light-emitting diode, corresponding with the amplitudes of the extracted alpha waves. In this treatment, this adjusted photic stimulation was given to the subject's closed eyes, resulting in the effective alpha enhancement by photic driving response. The numbness increased during each of PFB treatment, but the symptoms started to improve gradually after 10 days. Other symptoms disappeared after 40 days. CD20 levels increased with this treatment. This case suggests that the PFB treatment may speed the natural remission of MFS. This treatment may be worth considering in patients who suffer polyneuropathy.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1000-1009
• /
• 2006

We propose an adaptive linear interpolation locating sub-pixels. We utilize a pixel-based parameter in the conventional linear interpolation. To optimally obtain the parameter, we propose a generic interpolation structure including a low pass filter and minimum mean square error. We also propose a simple version of the generic interpolation method, which obtain a closed-form solution. Simulation results show that the proposed method is superior to the state-of-the-art methods such as warped distance linear interpolation and shifted linear interpolation, as well as the conventional method such as the linear interpolation and the cubic convolution interpolation in terms of the subjective and objective image quality.

• Journal of Power Electronics
• /
• v.16 no.4
• /
• pp.1483-1493
• /
• 2016

Multiple parallel inverters have multiple resonant frequencies that are influenced by many factors. This often results in stability and power quality problems. This paper develops a multiple input multiple output model of grid-connected inverter systems using a closed-loop transfer function. The influence factors of the resonant characteristics are analyzed with the developed model. The analysis results show that the resonant frequency is closely related to the number, type and composition ratio of the parallel inverters. To suppress resonance, a scheme based on virtual impedance is presented, where the virtual impedance is emulated in the vicinity of the resonance frequency. The proposed scheme needs one inverter with virtual impedance control, which reduces the design complexity of the other inverter controllers. Simulation and experimental tests are carried out on two single phase converter-based setups. The results validate the correctness of the model, the analytical results and the resonant suppressing scheme.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1109-1114
• /
• 2007

This paper presents the road simulator control technology for reproducing the road input signal to implement the real road data. The simulator consists of the hydraulic pump, servo valve, hydraulic actuator and its control equipment. The QFT is utilized to control the simulator effectively. The control system illustrates a tracking performance of the closed-loop controller with low order transfer function G(s) and pre-filter F(s) for a parametric uncertain model. A force controller is designed to communicate the control signal between simulator and digital controller. The efficacy of the QFT force controller is verified through the numerical simulation, in which combined dynamics and actuation of the hydraulic servo system are tested. The simulation results show that the proposed control technique works well under uncertain hydraulic plant system. The conventional software (Labview) is used to make up for the real controller in the real-time basis, and the experimental works show that the proposed algorithm works well for a single road simulator.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.11
• /
• pp.1069-1076
• /
• 2007

This paper presents the road simulator control technology for reproducing the road input signal to implement the real road data. The simulator consists of the hydraulic pump, servo valve, hydraulic actuator and its control equipment. The QFT(Quantitative Feedback Theory) is utilized to control the simulator effectively. The control system illustrates a tracking performance of the closed-loop controller with low order transfer function G(s) and pre-filter F(s) for a parametric uncertain model. A force controller is designed to communicate the control signal between simulator and digital controller. Tracking specification is satisfied with upper and lower bound tolerances on the steep response of the system to the reference signal. The efficacy of the QFT force controller is verified through the numerical simulation, in which combined dynamics and actuation of the hydraulic servo system are tested. The simulation results show that the proposed control technique works well under uncertain hydraulic plant system. The conventional software (Labview) is used to make up for the real controller in the real-time basis, and the experimental works show that the proposed algorithm works well for a single road simulator.