• 대한치과의사협회지
• /
• 제55권9호
• /
• pp.604-616
• /
• 2017

In clinical dental research, errors occur in spite of careful study design and conduct. Data cleaning procedures intend to identify and correct these errors or at least to minimize their influence on study. Outlier is the one of these errors. Outlier detection is the first step in data analysis process which has a serious effect in the field of dental research. Hence, this paper aims to introduce the methods to detect the outliers and to examine their influences in statistical data analysis.

• 상하수도학회지
• /
• 제28권3호
• /
• pp.265-276
• /
• 2014

In this study, we suggested 4 plans to reduce non-point pollutant sources in Dongcheon and analyzed their controlling effects by water quality modeling, XP-SWMM. To do this we identified the influx of non-point pollutant sources to the initial rainwater through the water quality survey in the river and analyzed the causes of them at major locations, and suggested 4 kinds of plans reducing non-point pollutant sources. Plans reducing the non-point pollutant sources through cleaning the industrial road around the river(plan A), through a separate treatment facilities like the gutter(plan B), through installing treatement facilities(plan C), or through combing plan B and C(plan D) were analyzed using XP-SWMM model. The analysis showed that plan A, B, C and D reduced non-point pollutant sources average 21.7 %, 24.7 %, 49.3 %, 56.7 % respectively. Therefore, the water quality pollution in Dongcheon due to the influx of non-point pollutant sources is considered to be reduced effectively though cleaning the road, installed at the exits of paddy or factory basins, invasion type facilities or equipment-type facilities.

• 한국염색가공학회지
• /
• 제11권5호
• /
• pp.30-37
• /
• 1999

The extracts drawn out from Artemisia princeps by water was concentrated. Using this concentrate the silk and the cotton fabrics were dyed, and they were measured with the K/S value, surface color and mordant quantity in order to evaluate the dyeability and the antimicrobial activity. The results are as follows; 1. The K/S value of the silk fabric was much higher than that of the cotton fabric. And the color yield of the dyed silk fabric was most efficient for the premordanting method. 2. The surface colors on the dyed fabric depended heavily upon mordants used or mordanting methods. For all cases, the value of the dyed fabric was generally dark. For the Cr-mordant among various mordants, the chroma produced clear and the color difference was distinct when using the Fe-mordant. 3. On the other hand the amount of absorbed mordant in the silk fabric was larger than that of the cotton fabric. And the Cu-mordant was most efficient. 4. The color fastness was significantly improved when mordants were added. Cr-mordant improved best in all of the dry cleaning, wet cleaning and perspiration fastness. Iron and abrasion fastness showed over 4-5 grade regardless of any mordant. And light fastness was best in Cu-mordant. 5. The Cu-mordant showed the greatest antimicrobial activity in both of mordant treat silk and cotton fabrics.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.164-180
• /
• 2003

A series of cooperative interlaboratory tests (round robins) was conducted in 1997, 1998, 1999, 2000, 2001, 2002 and 2003 by the DIN 51834 Working Group on Tribological Tests in Translatory Oscillation Apparatus. The statistical analysis of these test results shows the influence of cleaning solvent, machine model and evaluation criteria on the tribological properties of the lubricants tested. Coefficients of friction and wear results are ranked according to the effects of ten different cleaning solvents, where isopropanol gave the lowest values and isoparaffin solvents the highest. The effect of machine model on coefficients of friction varied from about $0.2\%\;to\;0.9\%$ of the mean. Wear results were not affected. The tests also showed that the seizure criteria and methods of measuring wear required for in the test procedure do not provide a suitable measure of the tribological properties of some lubricants. The precision was Improved by introducing a grease apply caliper as well as an increased stroke to 1,5 mm and running-in. The temperature does not affect the precision of the oil test procedure.

• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.34-39
• /
• 2004

Dyeing properties of Glycyrrhizae Radix was investigated with silk fabrics. Dyeing water is a type of chalcone, it showed yellow in IR spectrum. K/S value showed high in following conditions; Glycyrrhizae Radix $200g/1\ell4 water, $80^{\circ}$ of dyeing temperature, 90 minute of dyeing time. Glycyrrhizae Radix dyeing water has higher K/S value in alkalinity(pH9) than in neutrality(pH7) or acidity(pH3) conditions. K/S value showed highest in pH5 premordant method of alkalinity dyeing water condition. The color of silk fabric dyed with Glycyrrhizae Radix is yellow. The change of color did not show by mordant treatment. K/S value showed higher in mordant treatment than nonmordant. Light fastness showed over 3 degree in nonmordant, premordant, simmordant(Al,Cu,Fe) and postmordant(Cu). Water fastness showed over 3 degree in dyeing water(pH3, pH5, pH7). Dry cleaning fastness showed over 3 degree in all dyeing methods. Washing fastness is showed in 2-3 degree; Al in nonmordant, premordant, simmordant and Cu in simmordant are 2-3 degree. Perspiration fastness is nearly 3-4 degree in premordant and simmordant. Perspiration fastness shows high in premordant, simmordant than postmordant. The fastness of light, water, dry cleaning, washing, perspiration shows better nonmordant, premordant, simmordant than postmordant method.

• 패션비즈니스
• /
• 제20권5호
• /
• pp.76-86
• /
• 2016

In this research, the dyeing properies of Amur cork tree on sheep leathers were evaluated. The proper dyeing conditions were identified with K/S values depending on the colorant concentration, dyeing time, dyeing temperature and dye bath pH. For the proper conditions, the changes of color for different mordants(Al, Cu and Fe) were observed as $L^*a^*b^*$ coordinates and H V/C values. The color fastnesses were also examined, and the antimicrobial properties were examined. The results were as follows: For the sheep leather, the optimized dyeing conditions were 300% o.w.f., 40 min., $40^{\circ}C$, and pH 5. The leather color was yellow in the dyeing and mordanting. Although the $L^*a^*b^*$ changed with the mordants and mordanting methods, the overall hue was yellow. The colorfastness to light was reduced compared to original(untreated) sheep leather. The rubbing fastness was generallry satisfactory as 4-5 rating. The dry-cleaning fastness(stain) of leathers were generally at the 4-5 level, but dry-cleaning fastness(fade) was a little reduced compared to original sheep leather. The dyed and pre-mordanted and dyed sheep leather showed excellent antimicrobial properties.

• Safety and Health at Work
• /
• 제11권1호
• /
• pp.80-87
• /
• 2020

Background: Residential and commercial cleaning is a part of our daily routine to maintain sanitation around the environment. Health care of professionals involved in such cleaning activities has become a major concern all over the world. The present study investigates the risk of musculoskeletal disorders in professional cleaners involved in floor mopping tasks. Methods: A cross-sectional study was performed on 132 mopping professionals using a modified Nordic questionnaire. The Pearson correlation test was implemented to study the association of perceived pain with work experience. The muscle strain and postural risk were evaluated by means of three-channel electromyography and real-time motion capture respectively of 15 professionals during floor mopping. Results: Regarding musculoskeletal injuries, risk was reported majorly in the right hand, lower back, left wrist, right shoulder, left biceps, and right wrist of the workers. Work experience had a low negative association with MSDs in the left wrist, right wrist, right elbow, lower back, and right lower arm (p < 0.01). Surface EMG showed occurrence of higher muscle activity in upper trapezius and biceps brachii (BB) muscles of the dominant hand and flexor carpi radialis and BB muscles of the nondominant hand positioned at the upper and lower portion of the mop rod, respectively. Conclusion: Ergonomic mediations should be executed to lessen the observed risk of musculoskeletal injuries in this professional group of workers.

• 한국표면공학회지
• /
• 제31권2호
• /
• pp.117-126
• /
• 1998

In this study, the residue remaining on the silicon wafer during the oxide overetching using $C_4F_8/H_2$ helicon were plasmas and effects of various cleaning and annealing methods on the removal of the remaining residue were investigated. The addition of 30%$H_2$ to the C4F8 plasma increased the C/F ratio and the thickness of the residue on the etched silicon surface. Most of the residuse on the etched surfaces colud be removed by the oxygen plasmsa cleaning followed by thermal annealing over $450^{\circ}C$. Hydrogen-coataining residue formed on the silicon by 70%$C_4F_8/30%H_2$ helicon plasmas was more easily removed than hydrogen-free residue formed residue formed by $C_4F_8$ helicon wear plasmas. However, damage remaining on the silicon surface overetched using 70%$C_4F_8/30%H_2$ helicon plasmas was intensive and the degree of reocvery duing the post-annealing was lower.

• 복식
• /
• 제58권9호
• /
• pp.129-141
• /
• 2008

Jikgeum(woven with supplementary golden wefts) hyungbae(rank badge) of danryung(official uniform) excavated from Im Backryung'tomb($1498{\sim}1546$) of the Joseon dynasty($1392{\sim}1910$) at Goyang, Gyunggi-Do in 2007, was in a critical condition because of serious collapse of substrate in metal thread. For conservation of hyungbae, metal thread was examined by different scientific methods(Light Microscope, Scanning Electron Microscope and Energy Dispersive X-Rray Spectrometry(SEM-EDS), Fourier Transform Infrared Spectroscopy(FT-IR)). Analytical data showed that metal thread was gilt membrane strip composed of gold leaves and proteinaceous substrate which was probably parchment. To protect collapse of substrate, 1% solution of Paraloid B-72 was infilterated into substrate for consolidation of substrate and it was adhered to warp of fabric in hyungbae, before wet cleaning. After wet cleaning, the most of the gold leaves were restored, which was confirmed by both the examination with the naked eye and the microscopic examination.

• 반도체디스플레이기술학회지
• /
• 제7권2호
• /
• pp.59-62
• /
• 2008

The Lifetime of OLEDs by ITO/glass substrates cleaning method and cathode deposition method were investigated in the fabrication of green light emitting OLEDs with $Alq_3$-C545T fluorescent system. In our experiments, the optimum cleaning method was obtained at last processing of boiling IPA(isopropyl alcohol). And the optimum deposition methode was obtained at 3 steps deposition rate of Al. The deposition rate of 3 steps progressed changing from $0.5\AA$/sec to $3\AA$/ sec. The green light emitting OLED with plasma treatment at 150W for 2 minutes showed the highest luminance and efficiency of 20000 cd/$m^2$ and 16 lm/W. On the contrary, the OLED device without plasma treatment showed much lower performance with the luminance and efficiency of 3500 cd/$m^2$ and 2 lm/W.