• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1027-1033
• /
• 1996

Under the Irradiation of the radiofrequency wave, the dipole materials vibrate as microwavic phase change. This causes friction between adjacent molecules and enables an unique charateristics of interior heating of the materials. When dipole gases are adsorbed inside of a solid radiofrequency wave absorber, the gases can be decomposed easily by the microwave energy. The decomposition of sour gases was successfully tested in this manner to develop a sour gas removal process from the combustion flue gas. The standard gas bearing NO and $SO_2$ was passed through and microwave was applied on the calcined char bed as the wave absorber and the gas adsorbent. It was found that more then 95% of NO and 70 % of $SO_2$ was decomposed to the environmentally clean elements during the passage through the 20 gram char bed under the microwave impingement. The surface area and the porosity of char increased because the oxygen radicals produced from decomposed gas attacked carbon in the char capillaries and formed $CO_2$. For a lower concentration of sour gas, general cases in the commercial combustion processes, almost complete decomposion is believed possible and this method is surely expected to be useful for the prevention of air pollutions.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.105-112
• /
• 2013

The new renewable energy became popular as a clean and sustainable alternative energy under the circumstances that the entire world is facing severe abnormal climate due to the use of fossil fuel, and among which, solar energy can be obtained anywhere and is not difficult to apply it into the existing buildings, which makes it possible to be widely distributed. However, as PV module is installed into a single plate system, it shows structural weaknesses which are vulnerable to wind load and give loss to design elements in external appearance. Accordingly, this study planned one-step parallel system to complement the problems occurring from a single plate system and used STAR-CCM+ V.8 made by CD-Adapco, a computational fluid dynamics(CFD) simulation tool to measure wind load stability and support based on the design standards for a single plate system and one-step parallel system. Building height was limited to less than 10m and wind speed was given when increasing from 35m/s to 50m/s by 5m/s on PV system installed into the flat roof. In this case, our analysis suggested that step-one parallel system was in class 7-9 according to Beaufort's wind power classification, which did not have an impact on the fixed PV system, and the single plate system is considered to cause risks in designing wind speed in central districts because it is more than wind power class 12.

• Journal of IKEEE
• /
• v.19 no.2
• /
• pp.219-224
• /
• 2015

Electrical impedance tomography is an imaging technique to reconstruct the internal conductivity distribution based on applied currents and measured voltages in a domain of interest. In this paper, a modified Gauss-Newton method is proposed for conductivity image reconstruction. In the proposed method, the dimension of the inverse term is reduced by replacing the number of elements with the number of measurement data in the conductivity updating equation of the conventional Gauss-Newton method. Therefore, the computation time is greatly reduced as compared to the conventional Gauss-Newton method. Moreover, the regularization parameter is selected by computing the minimum-maximum from the diagonal components of the Jacobian matrix at every iteration. The numerical experiments with several scenarios were carried out to evaluate the reconstruction performance of the proposed method.

• Journal of the Korean Society of Food Culture
• /
• v.9 no.4
• /
• pp.341-353
• /
• 1994

This study delves into the general characteristics of spirits brewed in the Central Region of Korea-Seoul, Kyonnggi-do, Chungchung-do-paying particular attention to their varieties and fermenting methods and also comparing similarities and differences of their features. It is found first of all that there are a wide range of variety in the kinds of liquors. Among the 21 spirits investigated, not a single one resembles any one of the remaining in terms of the raw material, and the brewing method and process. Secondly, all of them use locally produced grains and can be classifiable as belonging to the common category of yakju (clean spirit) with fragrant elements added for the purpose of enhancing health or decreasing any harmful effects after drink. Thirdly, these traditional folk wines are characterized by the addition of secondarily fermented spirits. The more secondarily fermented spirit a wine has, the more fragrant and palatable it becomes and also the less harmful. Fourthly, all the spirits of this region are fermented by using yeast kodupap (steamed rice). The brewing temperature is usually around $15{\sim}20^{\circ}C$ for $5{\sim}8$ days or $3{\sim}4$ days for the majority of the cases. Fifthly, purifying is done with the yongsoo (strainer), the sieve, traditional Korean paper, etc. As such, we can say that all the brewers endeavor to maintain Korean traditional methods of wine making.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.3
• /
• pp.14-21
• /
• 2009

This study discusses the definition, determination and use of Imminent & Substantial Endangerment (ISE) included in the United States environmental laws. ISE is a contamination situation and statutory authority that state and federal governments issue an administrative order to responsible parties for clean-up. ISE is appeared in all kinds of official government documents such as administrative oders on consent, judicial consent degrees, and unilateral administrative order. In order to invoke ISE authority, the governments should have evidence of each of the following elements; 1) a possible ISE 2) because of actual or threatened release 3) of a hazardous substance 4) from a facility. The determination of ISE relies on detail scientific evidence and documentation in order to demonstrate the existence of conditions that may present an ISE. However, any official protocol or procedure has not been found for determining an ISE, although an ISE order documentation format is suggested by U.S. EPA.

• Cross-Cultural Studies
• /
• v.22
• /
• pp.223-277
• /
• 2011

Tan Yuanjie(譚元杰) of CHINA COSTUME ART OF PEKING OPERA("中國京劇服裝圖譜") is 'Foreword' attention from the bar 'Formalism'. A note is makeup system from ever performances here, 'what kind of adaptation must be a corresponding type of costume should be worn.' This stance to 'type of person's identity and faced the scene correlated' with the actual performance tradition plays out is going and, while here the rules to capture the opera's on the character of 'identity and the circumstances under clothing' is defined. This position discussed previously 'Formalism' in line with the will he perform, and looks to meet the elements of production. This basic stance is clean up, while 'Old Beijing Opera costumes costumes taxonomy largely' literary costume' and 'militant outfit' into two groups divided over throughout steamroll surgery, because surely need to have a more systematic classification. The classification system was established as 'Part 1. Mang, Part 2. Pi, Part 3. Xi, Part 4. Kao, Part 5. YI'. In addition to these classification systems, as well as the aforementioned 'object theory' Given the symbolic significance of the capacity to keep in mind is necessary. Costumes conduct, character, situation, atmosphere and so the transport of charged symbols here, a target symbol of the system is the projection of water. This costume is detrimental to the mall for the positionsay, but I kept in mind damwongeolyi internationalization of Chinese culture. when you see the view from the perspective of semiotic systems for the sign, that the theater is necessary to complement. In this paper, 'Yi(衣)' costume on the corresponding point of the target compared to the China Culture Department of Theatre and Folklore methodology ran off and sprinting was to lay the groundwork for research.

• Journal of Powder Materials
• /
• v.26 no.2
• /
• pp.146-155
• /
• 2019

Rare earth magnets are the strongest type of permanent magnets and are integral to the high tech industry, particularly in clean energies, such as electric vehicle motors and wind turbine generators. However, the cost of rare earth materials and the imbalance in supply and demand still remain big problems to solve for permanent magnet related industries. Thus, a magnet with abundant elements and moderate magnetic performance is required to replace rare-earth magnets. Recently, $a^{{\prime}{\prime}}-Fe_{16}N_2$ has attracted considerable attention as a promising candidate for next-generation non-rare-earth permanent magnets due to its gigantic magnetization (3.23 T). Also, metastable $a^{{\prime}{\prime}}-Fe_{16}N_2$ exhibits high tetragonality (c/a = 1.1) by interstitial introduction of N atoms, leading to a high magnetocrystalline anisotropy constant ($K_1=1.0MJ/m^3$). In addition, Fe has a large amount of reserves on the Earth compared to other magnetic materials, leading to low cost of raw materials and manufacturing for industrial production. In this paper, we review the synthetic methods of metastable $a^{{\prime}{\prime}}-Fe_{16}N_2$ with film, powder and bulk form and discuss the approaches to enhance magnetocrystalline anisotropy of $a^{{\prime}{\prime}}-Fe_{16}N_2$. Future research prospects are also offered with patent trends observed thus far.

• Membrane Journal
• /
• v.32 no.1
• /
• pp.13-22
• /
• 2022

Ever increasing global energy demand gives rise to uncontrollable environmental pollution. Demand on fossil fuel and consequent carbon emission leads to global warming and climate change. Nuclear energy is an alternative source to generate clean energy but mining of nuclear fuel is associated with harmful chemicals. Mining of valuable minerals from sea water by membrane separation process is a cost effective along with environmental friendly process. Separation and adsorption based mining of valuable minerals from sea water are another efficient process. Recovery of actinides from rare earth elements are very challenging and expensive process. Pressure driven membrane separation process is economically more viable along with environmental process. In this review membrane separation process are based on polyether sulfone, polyamide, polyimide, polyamidoxine and hybrid membranes. In case of adsorption process, mainly amidoxime kind of adsorbent are discussed.

• Clean Technology
• /
• v.18 no.4
• /
• pp.379-389
• /
• 2012

Environmental issues are being paid more attention due to income growth, urban overcrowding, and population growth in Korea. Among the various environmental problems, odor damage is the one of the serious factors. To take example for food waste combination treatment in Su-young wastewater treatment plant in Busan, many complaints occurred because this plant locate around residential areas. The purpose of this work is not only to analyze odorous elements and their contributions but also to evaluate odor quotient (OQ), sum of odor quotient (SOQ), and treatment efficiency of bio-filter. The results of dilution sensory test of complex odor, grinder, leachate, hopper indicated higher order complex odors happen in July and August. The main odorous elements consisted of hydrogen sulfide, ammonia, methly mercaptan and acetaldehyde, which were analyzed by instrumental detection method, and methyl mercaptan was exceeded over 3,571 times of threshold. In addition, result of contribution of odor was methyl mercaptan (49.95 to 59.08%), hydrogen sulfide (20.43 to 29.27%), trimethylamine (8.82 to 13.42%) and acetaldehyde (9.17 to 11.35%). Other facilities were compared with the contribution of the odor using OQ and SOQ during the process. Sulfur compounds, acetaldehyde, and trimethylamine are high contribution of odor using OQ as well as odor intensity of grinding process is highest. As a result, sulfur compounds (e.g., methyl mercaptan and hydrogen sulfide) are highest for OQ and SOQ of grinding process is highest as 7,067. The removal efficiency of deodorization equipment was more than 90.00% in ammonia and amines, but the average efficiency of sulfur compounds was 53.51%. Thus, this facility is more higher contribution of acetaldehyde and trimethylamine than other treatment facilities. And food waste treatment in environmental area needs to consider appropriate capacity and refers to other bio-filter operating conditions.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.4
• /
• pp.14-23
• /
• 2014

The purpose of this study is to contribute in building credibility of the methodology of the appearance of the traditional colors and the interpretation of the meaning of those appearances by analyzing the spatial construction and configuration and the traditional colors that appear in spatial elements about the scenery component that appear in Seyeonjeong. We conducted a literature research about the traditional colors, the background of the creation of Seyeonjeong, and etc. For the contents for the empirical analysis, we took the scenery and space elements in the poems, such as Eobusasisa and O-u-ga, and the contents of poems related to ojeongsaek (five Korean traditional colors) based on the Yin-Yang and the Five Elements ideology Particularly, after dividing the spatial elements appearing in Seyoenjeong into visual, synesthetic, symbolic/cognitive spatial element, we further distinguished the visual space into positions and directions of the of the spaces and the scenery of the season; the synesthetic space into seasons, time and five senses; and the symbolic/cognitive space into chiljeong (or the seven passions) and sadan (or the four clues). Then we carried out the study by analyzing the correlation between the intention of the garden creation and the meaning of the spaces, through the analysis of ojeongsaek system for each spatial element. Firstly, spatial structure and format that appear in Seyeonjeong can be divided into two directional axes of southeast and northwest according to the flat form of the Seyeongjeong's rectangular palace, with Seyeongjoeng as the center. Secondly, in spatial component element, the frequencies of appearance of the traditional colors of Seyoenjeong are 33.2% for white, 20.8% for blue, 20.8% for black, 18.7% for red and 6.3% for yellow. Thirdly, based on the analysis of the traditional colors the most frequent appearance of 'white' left a room for interpretation like the creation of Seyeonjeong was to enjoy secular living without lingering political feelings so that the high mountains remain clear and clean. Also, the predominant frequency of appearance of blue, similar frequency of appearance of black and red, and the least frequent appearance of yellow is in agreement with or can be at least interpreted related to Yun Seon-do's intention for creating Seyeonjeong not for political rank or power but as a place to enjoy nature, through which he can build on his knowledge, and to lead rest of his life as a noble being through plays, like dancing and writing poems. Fourthly, these interpretations of the analysis of the frequency of appearance of the traditional colors of Seyeongjong shows the reliability, validity, and consistency of the methodology of the analysis of the frequency of appearance of the traditional colors and the interpretation of the meanings in the context that the color white appears most frequently in Soswewon as well and that the background life of the Soswewon's creator Yangsanbo can be interpreted in a similarly way. Above all, this study is significant from the fact that we proposed a theory about the method of analysis and interpretation of the traditional colors in a traditional landscape space. Moreover, there is a great significance of discovering that traditional colors appear in traditional spaces and this can be used as a methodological framework to interpret things like, intention for creation of (buildings/architectures).