• International Journal of Aeronautical and Space Sciences
• /
• 제17권2호
• /
• pp.157-166
• /
• 2016

Aerodynamic loads for a horizontal axis wind turbine of the National Renewable Energy Laboratory (NREL) Phase VI rotor in yawed condition were predicted by using the blade element momentum theorem. The classical blade element momentum theorem was complemented by several aerodynamic corrections and models including the Pitt and Peters' yaw correction, Buhl's wake correction, Prandtl's tip loss model, Du and Selig's three-dimensional (3-D) stall delay model, etc. Changes of the aerodynamic loads according to the azimuth angle acting on the span-wise location of the NREL Phase VI blade were compared with the experimental data with various yaw angles and inflow speeds. The computational flow chart for the classical blade element momentum theorem was adequately modified to accurately calculate the combined functions of additional corrections and models stated above. A successive under-relaxation technique was developed and applied to prevent possible failure during the iteration process. Changes of the angle of attack according to the azimuth angle at the specified radial location of the blade were also obtained. The proposed numerical procedure was verified, and the predicted data of aerodynamic loads for the NREL Phase VI rotor bears an extremely close resemblance to those of the experimental data.

• 한국언어정보학회:학술대회논문집
• /
• 한국언어정보학회 2002년도 Language, Information, and Computation Proceedings of The 16th Pacific Asia Conference
• /
• pp.36-49
• /
• 2002

One main complexity of the copula constructions concerns a mismatch between morphology and syntactic constituency: the copula seems to form a morphological unit with the immediately preceding element, whereas in terms of syntax the copula appears to take this as its syntactic complement. In capturing such mismatches, we show that the copula is treated as an independent verb at the level of tectogrammatical structure (or syntax tree), whereas as a bound morpheme at the level of phonogram-matical structure (or domain tree), in terms of Dowty 1992 (or Reape 1994). This paper, adopting the notion of DOMAIN in HPSG, shows that copula constructions are a subtype of compacting-constructions. These constructions compact the domain value of the copula and that of its preceding element together into one domain unit, eventually making it inert to syntactic phenomena such as scrambling, deletion and pro-form substitution. This construction-based approach provides a clean analysis for the formation of the copula construction and related phenomena.

• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1844-1853
• /
• 2001

In the present investigation, it was attempted to design the rolling pass schedule fur a clean steel of 0.1C-1.5Mn-0.25Si with the objective of the austenite grain refinement. As the method of approach, a coupled mathematical modeling technique was proposed which consists of a recrystallization model and a flow stress modes. The validity of the coupled model was examined through comparison with results of continuous and discontinuous compression tests at various temperatures, strains and strain rates. The coupled model was incorporated with the finite element method to set up a systematic design methodology far the rolling path schedule for austenite grain refinement. Two path schedules were obtained and discussed in the paper with regard to rolling path time, average grain size, grain size deviation in thickness, etc.

• 소성∙가공
• /
• 제14권3호
• /
• pp.207-214
• /
• 2005

Blanking process is widely used fur producing various structural parts. However, fine blanking technology is frequently used as a single step blanking operation with clean cut surface of a sheared surface because the fractured surface of parts causes serious problems in the final product and therefore it must be removed by the post-processing in case of the conventional blanking. In the present investigation, a fine blanking process was designed within the framework of progressive die to produce a carrier plate assembled within the auto transmission. Finite element analysis of the shearing behavior at the respective stage of the progressive fine blanking was conducted to validate the designed die parameters. Finally the designed progressive fine blanking process was experimentally evaluated by using the machined die.

• 한국기계가공학회지
• /
• 제5권3호
• /
• pp.51-57
• /
• 2006

Hydro-mechanical punching was developed for preventing burr formation. Circular hole punching and Finite element method(FEM) analysis were conducted to investigate shearing characteristics of this process in comparison with conventional and mechanical counter punching. In this process hydrostatic pressing with appropriate medium was utilized instead of counter punch, which resulted in the delay of the point that the fracture is initiated and clean shearing surface was obtained. FEM analysis was utilized to find out optimum processing parameters and shearing mechanism for burr-free hole punching.

• 반도체디스플레이기술학회지
• /
• 제22권3호
• /
• pp.21-27
• /
• 2023

In this article, a plate-type megasonic cleaning system with cooling pins is proposed for the sliced ingot, which is a raw material of silicon (Si) wafers. The megasonic system is operated with a lead zirconate titanate (PZT) actuator, which has high electric resistance, thus when it is being operated, it dissipates much heat. So this article proposes a megasonic system with cooling pins. In the design process, finite element analysis was performed and the results were used for the design of the waveguide. The frequency with the maximum impedance value was 998 kHz, which agreed well with the measured value of 997 kHz with 0.1 % error. Based on the results, the 1 MHz waveguide was fabricated. Acoustic pressures were measured, and analyzed. Finally, cleaning tests were performed, and 90 % particle removal efficiency (PRE) was achieved over 10 W power. These results imply that the developed 1 MHz megasonic will effectively clean sliced ingot wafer surfaces.

• 청정기술
• /
• 제13권4호
• /
• pp.281-286
• /
• 2007

본 연구에서는 폐열회수형 환기장치(전열교환기)로부터의 휘발성 유기화합물이 측정되었다. KS 냉방 및 난방표준조건하에서 휘발성유기화합물의 초기 배출특성을 연구하기 위하여 폐열회수 환기장치로부터 2종류의 열교환소자(L형과 M형)가 평가되었다. 휘발성 유기화합물은 다양한 풍량 변화와 운전시간 변화에 대하여 측정되었다. 본 연구의 분석방법 및 기기상의 한계로 인하여 농도가 비교적 큰 물질만을 살펴보니 페열회수 환기장치에서는 acetic acid, 2-butanone (MEK), 2-(methylthio)ethylamine, toluene, styrene 및 x-acids (Ion 57) 등의 6종의 휘발성 유기화합물이 배출됨을 확인하였다. 배출된 휘발성 유기화합물의 농도는 운전조건에 대해서는 크게 영향을 받지 않았다. 높은 작동온도 때문에 휘발성 유기화합물의 농도는 난방조건보다는 냉방조건에서 더 크게 나타났다.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.1-10
• /
• 2020

This study deals with the fabrication and thermal characterization of planar heating elements attached to the backside of the reflector used in the electrodeless lamp of a freezer. We tried to solve the problem of the local heat generation of the linear heating element that occurs about 50℃. The homogeneous dispersion and manufacturing excellence of the planar heating element produced were confirmed through SEM and EDS. In addition, the test specimens was prepared according to the change in the ratio of carbon fiber to the basis weight of the planar heating element, and a sample having a basis weight of 50g/㎡ having a content ratio of carbon fiber of 70% was selected. That sample showed low surface resistance of 4.3Ω/sq and high temperature of about 81℃ at 6V. Durability was confirmed by performing repeated bending evaluation of 3000 cycles for the sample. Large area test specimens were prepared to be applied to the actual reflector, insulated by EVA film and analyzed for their thermal characteristics. From 13V application, the temperature of the linear heating element was higher than 50℃ and the average temperature of 68℃ was maximum at 18V.

• 환경영향평가
• /
• 제10권2호
• /
• pp.99-108
• /
• 2001

This study was performed to develop an information processing system for the sound conservation of soil and groundwater resources. The system contains numerical models and geographic information systems for underground flow and contamination. Multidimensional Finite Element Model for Subsurface Environment (MFEMSE) was invented to analyze underground flow and pollution problems of water and gas phases. Newly developed and conventional models (MODFLOW, MOC3D, MT3D, PMPATH, PEST, UCODE) were integrated with GIS (ArcView) for the construction of an integrated information management system of subsurface environment. This system was applied to the management of three mineral water companies located in clean high mountain basin. Desirable management criteria and operational strategies were suggested using this system. The system was constructed to be applied for the broad sense of decision supporting tools in related topics of this study, so that it can be used not only for the prevention regulations, but also for clean up projects.

• 한국IT서비스학회지
• /
• 제14권4호
• /
• pp.45-60
• /
• 2015

Governments around the world invest in research and development (R&D) for different purposes : national economy, defence, environment, health, etc. as a means of national survival beyond the means of national competitiveness. These are usually programs with high social impact but low short-term economic impact or large scientific programs that are too expensive and risky for private sector investment alone. The Republic of Korea has also shown a very successful model of economic progress and social development through government R&D programs. However, there have been many corruption scandals behind it while selecting awardees for government R&D programs in Korea. So, the Republic of Korea focused on reforming appraisal system for government R&D and began preparation for "Clean Appraisal System" last year. In this study, first we analyzed the related appraisal tasks through the review of laws and administrative rules and typed appraisal tasks according to the flow of the actors and time. Thus securing the information infrastructure and finally we drew the conceptual model of the system according to an open appraisal tasks by introducing an element of the OECD on open government typed appraisal tasks.