• 제목/요약/키워드: clays

검색결과 467건 처리시간 0.025초

Nonlinear consolidation of soft clays subjected to cyclic loading - Part I: theory

  • Yazdani, Hessam;Toufigh, Mohammad Mohsen
    • Geomechanics and Engineering
    • /
    • 제4권4호
    • /
    • pp.229-241
    • /
    • 2012
  • In this paper, utilizing void ratio-effective stress and void ratio-permeability relationships, a system of two nonlinear partial differential equations is derived to predict the consolidation characteristics of normally consolidated (NC) and overconsolidated (OC) soft clays subjected to cyclic loading. A developed feature of the coefficient of consolidation containing two key parameters is emerged from the differential equations. Effect of these parameters on the consolidation characteristics of soft clays is analytically discussed. It is shown that the ratios between the slopes of e-$log{\sigma}^{\prime}$ and e-log k lines in the NC and OC states play a major role in the consolidation process. In the companion paper, the critical assumptions made in the analytical discussion are experimentally verified and a numerical study is carried out in order to examine the proposed theory.

pH 변화에 따른 점토의 투수특성 (Permeability Characteristics of Clays with Various pH Values)

  • 장병욱;강상욱;김성필;차경섭
    • 한국농공학회지
    • /
    • 제44권6호
    • /
    • pp.99-105
    • /
    • 2002
  • A series of physical properties and rigid wall permeability tests were performed on two clays to investigate changes in permeability characteristics of clays with various pH values. Results of the study are as follows. As pH values were increased, coefficients of permeability of S-clay(clay fraction 18%) and J-clay(clay fraction 30%) were decreased in 3 and 4 times, respectively. Variation of coefficient of permeability of J-clay was considerably related to clay fraction. It can be said that coefficient of permeability of clays tested was increased, as pH values were decreased. This was because of increase in effective voids caused by decrease in thickness of diffused double layer, that is, change in soil structures and effective grain sizes.

인천 및 부산 재성형 해성점토의 비배수 전단강도 특성에 대한 연구 (A Study on Characteristics of Undrained Shear Strength of Remolded Marine Clays at Incheon and Busan)

  • 유남재;이한솔;전상현
    • 산업기술연구
    • /
    • 제30권A호
    • /
    • pp.103-109
    • /
    • 2010
  • This research is to determine characteristics of undrained shear strength of remolded marine clay at Incheon and Busan, representing typical marine clays in Korea. Laboratory vane tests with remolded marine clays sampled from coasts at Incheon and Busan were performed to investigate the undrained shear strength of them. Test results were compared with the predicted values of undrained shear strength proposed by many researchers. It was found that measured results about undrained shear strength with water content was in good agreements with values proposed by Terzaghi empirical formula.

  • PDF

미래산업에 적용가능한 점토 화합물: 식품포장 및 환경개선 (Engineered Clay Minerals for Future Industries: Food Packaging and Environmental Remediation)

  • 김형준;오제민
    • 한국광물학회지
    • /
    • 제29권2호
    • /
    • pp.35-45
    • /
    • 2016
  • 점토광물은 자연에서 쉽게 얻을 수 있고, 환경친화적이며 다양한 물리화학적 특성을 갖고 있어 인류 역사상 여러 분야에 활용되어 왔다. 최근에는 몬모릴로나이트, 카올리나이트, 세피올라이트, 금속이중층수산화물과 같은 점토 화합물에 화학적 개질을 도입하여 산업분야에 활용하고자 하는 연구가 활발히 진행되고 있다. 넓은 비표면적과 높은 측면비율, 나노수준의 입자 두께, 그리고 조절가능한 표면전하를 갖는 점토화합물에 화학적 개질을 적용하면, 고분자의 기계적 성질과 기체차단성을 개선하고, 고분자 필름에 지속적 항균성을 부여하는 충전제로 사용할 수 있다. 또한, 개질된 점토화합물은 높은 흡착능과 화학적 선택성을 지니므로, 수질이나 토양을 오염시키는 화학적, 생물학적 오염원을 효과적으로 제거하는 물질로도 활용 가능하다. 본 논평에서는 이러한 점토화합물들이 미래의 주요산업군인 식품포장재 및 환경개선 분야에 활용될 가능성에 대해 최근 연구 결과를 소개하고자 한다.

황토의 Microcystis spp. 제거효율 및 생태독성평가 (The Removal Efficiency of Microcystis spp. and Its Ecotoxicity Using Clay)

  • 박혜진;김상훈;박우상;이재윤;이재안
    • 한국물환경학회지
    • /
    • 제30권3호
    • /
    • pp.261-268
    • /
    • 2014
  • Four clays (both natural and commercial types) mainly used in Korea were tested for removal efficiency of Microcystis spp. and ecotoxicity on Daphnia magna and Vibrio fischeri. Four clays (clay A~D) were composed of 91.9~100% of sand (0.02~0.2 mm in particle size). Clay D consisted of lager particles than other clays. Major elements of the four clays were $SiO_2$ (45.3~62.8%), $Al_2O_3$ (18.5~29.7%) and $Fe_2O_3$ (5.4~7.9%). They contained kaolinite (clay mineral), quartz, muscovite, and so on. Clay C and D contained montmorillonite, one of the clay minerals improving clay-cell aggregation. For clay A, B and C, removal efficiency of Microcystis spp. was over 60% at 2 g/L. It reached about 100% at over 5 g/L. For clay D, it was over 60% and 95~100% at 5 g/L and 20 g/L respectively. After adding clays, pH decreased. The greatest drop of pH appeared at clay C. Except for addition of 100 g/L clay C, ecotoxicity on D. magna and V. fischeri didn't appeared at all dose of clays.

철환원세균을 이용한 저품위 점토의 개량 [II] : 도자기 점토 종류별 철불순물 제거 특성 (Refinement of Low-grade Clay using Iron-reducing Bacteria [II] : Removal Characteristics of Iron Impurity from Various Porcelain Clays)

  • 조경숙;류희옥
    • KSBB Journal
    • /
    • 제15권2호
    • /
    • pp.208-213
    • /
    • 2000
  • 백자, 청자 및 일반 자기 제조용 점토인 3종류의 점토(백토, 청토, 황토)를 철환원 미생물을 이용한 숙성과정을 통해 점토의 개질을 수행하였다. 철환원 미생물을 이용한 숙성기간 동안 점토 종류에 따른 철환원 및 용출특성과 숙성된 점토들의 물성 변화를 조사하였다. 숙성기간동안 점토의 철용출량은 점토의 종류에 관계없이 탄소원인 sucrose의 첨가량이 증가할수록 증가하였지만, 총 철용출량과 용출속도는 점토의 종류에 의존하였다. 숙성점토는 원료물질과 비교하여 sucrose 의 첨가량이 증가함에 따라 수축을 변화없이 강도와 색도가 향상되었다. 점토의 색도는 점토의 종류에 많은 영향을 받았으며, 점토의 숙성과정은 색도 중 적색도가 가장 많이 감소하는 효과를 제공하였다. 숙성점토의 물리적 특성과 탈철양을 고려할 때, 점토 중에 함유된 철환원을 전자공여체로 제공되는 sucrose의 최적 첨가량은 4wt% 임을 확인하였다.

  • PDF

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

POLYPROPYLENE/CLAY NANOCOMPOSITES FOR AUTOMOTIVE APPLICATIONS

  • HONG C. H.;LEE Y. B.;JHO J. Y.;NAM B. U.;HWANG T. W.
    • International Journal of Automotive Technology
    • /
    • 제6권6호
    • /
    • pp.665-670
    • /
    • 2005
  • Nanocomposites of polypropylene with organically modified clays were compounded on a twin-screw extruder by two-step melt compounding of three components, i.e., polypropylene, maleic anhydride grafted polypropylene (PP-g-MA), and organically modified clay. The effect of PP-g-MA compatibilizers, including PH-200, Epolene-43, Polybond-3002, Polybond-3200, with a wide range of maleic anhydride (MA) content and molecular weight was examined. Morphologies of nanocomposites and their mechanical properties such as stiffness, strength, and impact resistance were investigated. X-ray diffraction patterns showed that the dispersion morphology of clay particles seemed to be determined in the first compounding step and the further dispersion of clays didn't occur in the second compounding step. As the ratio of PP-g-MA to clay increased, the clay particles were dispersed more uniformly in the matrix resin. As the dispersibility of clays was enhanced, the reinforcement effect of the clays increased, however impact resistance decreased.

유기점토를 이용한 p-자일렌 흡착 제거 (Adsorption removal of p-xylene by organo-clays)

  • 조윤철;김태성;한선기;이채영
    • 상하수도학회지
    • /
    • 제26권6호
    • /
    • pp.747-756
    • /
    • 2012
  • The purpose of this study was to investigate adsorption characteristics of organo-clays for removal of p-xylene. As part of efforts to examine the adsorption capacities of some organo-clays for p-xylene, batch isotherm tests were carried out. Organo-clay minerals were synthesized under hydrothermal conditions using Na-montmorillonite as host clay and dimethyldioctadecylammonium (DMDA) bromide and benzyldimethyldodecylammonium (BDDA) chloride as organic surfactants, respectively. All synthetic organo-clay minerals were characterized by powder x-ray diffraction (XRD), scanning electron microscope (SEM) and energy-dispersive x-ray spectroscopy (EDX). The modification using dimethyldioctadecylammonium (DMDA) bromide showed the higher adsorption ability for p-xylene than benzyldimethyldodecylammonium (BDDA) chloride. On the other hand, the maximum adsorption capacity, $Q_{max}$ of DMDA modified montmorillonite estimated by Langmuir model was 27.0 mg/g, which was the higher value than other organo-clays.