• 한국염색가공학회지
• /
• 제33권3호
• /
• pp.161-167
• /
• 2021

Polymer nanocomposite is considered a great alternative to solve the limitations that exist in a simple combination material, as well as to produce multifunctional and high-performance results. In this research, PVA/bentonite nanocomposite films were prepared based on the presence or absence of modification of nano-clay(bentonite) a SUPERGEL^® product, modification conditions and content, and the structural variation of the prepared PVA/bentonite nanocomposite films were examined. The effect of variations in the internal structure of the nanocomposite on mechanical and thermal properties was investigated. As a result of evaluating the thermal characteristics of the PVA/bentonite nanocomposite film based on the concentration of the modified bentonite, it was verified that the thermal characteristics and stability were improved because of interaction between the polymer and the modified nano-clay.

• Food Science and Biotechnology
• /
• 제14권1호
• /
• pp.112-116
• /
• 2005

Composite films were prepared with soy protein isolate (SPI) and various clay minerals by casting from polymer and clay water suspension. Effects of clay minerals on film thickness, moisture content (MC), tensile strength (TS), elongation at break (E), water vapor permeability (WVP), and water solubility (WS) were tested. Properties including thickness, surface smoothness, and homogeneity of films prepared with organically modified montmorillonite (O-MMT), Wamok clay (W-clay), bentonite, talc powder, and zeolite were comparable to those of control SPI films. TS increased significantly (p<0.05) in films prepared with O-MMT and bentonite, while WVP decreased significantly (p<0.05) in bentonite-added films. WS of most nanocomposite films decreased significantly (p<0.05).

• 멤브레인
• /
• 제16권2호
• /
• pp.144-152
• /
• 2006

일반적으로 탄성체는 특히 고무는 단일성분으로 충분한 물성과 gas barrier성을 나타내지 못하고, 카본블랙과 실리카 등 보강제를 첨가하여 사용되고 있다. 따라서 본 연구에서는 기체 투과성을 낮추기 위해 층상구조를 갖는 점토광물의 일종인 유기실리케이트와 NBR, Ionomer, SEBS (Styrene Ethylene Butadien styrene Copolymer)의 유기탄성체를 이용하여 유기탄성체-clay 나노복합재료 막을 용융법으로 제조하였다. 유기탄성체-clay 나노복합재료 막의 기체 투과 특성은 가압 기체투과장치를 이용하여 실온에서 일정 압력을 유지하며 이산화탄소($CO_2$), 산소($O_2$), 질소($N_2$)가스의 기체투과도를 측정하였다. 유기탄성체-clay 나노복합재료 막은 clay자체의 도입과 층간거리의 확대로 기체분자의 tortuosity를 증가시켜서 기체투과도를 저하시키는 것을 확인하였다.

• 폴리머
• /
• 제28권2호
• /
• pp.177-184
• /
• 2004

고분자-점토 나노복합재는 적은 양의 점토 함유만으로도 물리적, 기계적 특성 등의 물성 증대 효과를 기대할 수 있다 고분자-점토 나노복합재의 일반적인 제조방법으로는 층간 삽입법과 직접 중합법으로 나눌 수 있다. 본 연구에서는 디알릴테레프탈레이트와 1,3-부탄디올을 단량체조 하여 알릴 에스터 예비 중합체를 합성하고, 점토를 이용하여 층간 삽입법과 직접 중합법으로 나노복합재를 제조하여 점토의 함량, 경화조건, 점토의 혼합 방법에 따른 특성을 분석하였다. 실리케이트 층간 거리는, 30B-점토를 이용하여 직접 중합법으로 제조하였을 때, 40$\AA$ 이상으로 가장 넓게 나타났다. 이는 유기화제의 작용기 (-OH)와 단량체가 실리케이트의 층 사이에서 에스터 교환 반응을 일으켜, 층간 거리가 증가하였기 때문이다. 또한 기계적 특성과 열적 특성 확인으로 점토의 분산 정도가 복합재의 물성 향상의 중요한 인자임을 확인할 수 있었다.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.73-80
• /
• 2007

Nanocomposites are used as a new class of polymer system and many researchers have been interested in the clay nanocomposite because of its good mechanical properties, heat resistance, flame retardancy, and barrier property. Modified layered silicates as fillers are dispersed at a nanometer-level within a polymer matrix and then new extraordinary properties are observed. In this study, polypropylene/clay nanocomposites were prepared in a twin screw extruder by the melt compounding method. In order to increase the compatibility of PP with the clay, the MAPP was used as a compatibilizer. And organic modified clays were used as a nanometric filler during the melt extrusion. Through the analysis of SAXS, WAXS, the dispersion of clay was investigated. These nanocomposites compared with a neat polypropylene/talc composite have high modulus, low toughness, and reduced shrinkage at the stable dispersion.

• 한국분말재료학회지
• /
• 제12권2호
• /
• pp.122-130
• /
• 2005

Layered silicate was synthesized at hydrothermal condition from silica adding to various materials. Nano-clay was synthesized by intercaltion of various amine compounds into synthetic layered silicate. The products were analysed by XRD, SEM, and FT-IR in order to examine the condition of synthesis and intercalation. From the results, it was confirmed that kaolinite was synthesized from precipitated silica and gibbsite at $220^{\circ}C$ during 10 days, and hetorite was synthesized from silica sol at $100^{\circ}C$ during 48 h. Na-Magadiite was synthesized from silica gel at $150^{\circ}C$ during 72 h, and Na-kenyaite was synthesized from silica gel at $160^{\circ}C$ during 84 h. Nano-clay was prepared using synthetic layered silicate intercalated with various amine compounds. Kenyaite was easily intercalated by various organic compounds, and has the highest basal-spacing value among other layered silicates. Basal-spacing was changed according to the length of alkyl chain of amine comopounds. Polymer can be easily intercalated by dispersion with large space of interlayer. Finally, epoxy/nano-clay nanocomposite can be easily prepared.

• 폴리머
• /
• 제24권2호
• /
• pp.228-236
• /
• 2000

알킬암모늄 브로마이드로부터 몬모릴로나이트 ($Na^{+}$-MMT)를 개질하여 2종류의 polyamic acid (BPDA-PPD, BTDA-ODA/MPD)를 삽입 후, 열이미드화 반응으로부터 폴리이미드/clay 나노복합재료를 제조하였다. 제조된 나노복합재료를 XRD로 관찰한 결과, 층간에 유기물질로 치환 되어 있는 MMT에 polyamic acid를 삽입하였을 경우 치환되어 있는 알킬 암모늄 양이온의 사슬 길이에 따라 MMT의 실리케이트의 층간거리가 증가하였다. 그리고 polyamic acid (PAA)가 삽입된 MMT를 승온하여 폴리이미드 복합재료를 제조한 결과 알킬 암모늄 양이온의 사슬길이와 PAA 종류에 상관없이 실리케이트의 층간 간격이 약 13.2 $\AA$이었으며, XRD와 TEM을 통하여 폴리이미드 매트릭스 내에 몬모릴로나이트의 실리케이트층이 규칙적으로 분산되어 있는 삽입형 (intercalated ) 나노복합재료임을 확인하였다. 그리고 복합재료의 열안정성을 TGA로 관찰 결과 폴리이미드 복합재료는 순수한 폴리이미드보다 열안정성이 약간 향상됨을 확인하였다. 그리고 동적 기계적 특성을 조사한 결과 나노복합재료가 폴리이미드보다 1.2~l.8배 저장탄성율이 증가됨을 확인하였다.

• Korea-Australia Rheology Journal
• /
• 제16권4호
• /
• pp.193-199
• /
• 2004

Poly(o-ethoxy)aniline (PEOA)/organoclay nanocomposite was prepared via a solvent intercalation using chloroform as a cosolvent with organically modified montmorillonite (OMMT) clay. The PEOA initially synthesized from a chemical oxidation polymerization in an acidic condition at pH = 1 was intercalated into interlayers of the clay with $25\;wt{\%}$ clay content. Electrical conductivity of the PEOA/OMMT nano­composite was found to be controlled via the intercalating process. The synthesized PEOA/OMMT nano­composite was characterized via an XRD and a TGA, and then adopted as an electrorheological (ER) material. The PEOA/OMMT synthesized with controllable electrical conductivity without a dedoping pro­cess was found to show typical ER characteristics possessing a yield stress from both steady state and dynamic measurements under an applied electric field.

• 한국재료학회지
• /
• 제23권7호
• /
• pp.366-372
• /
• 2013

Flexible polyurethane/clay porous nanocomposite foams were synthesized using natural and organically modified montmorillonite clays such as bentonite, closite 10A and closite 30B. The content of nanoclays was varied from 1 to 5 wt% of polyol. Dispersion of clay in Polyurethane(PU) matrix was investigated by X-ray diffraction(Cu-$K{\alpha}$ rays of wavelength $1.54{\AA}$) using an X-ray diffractometer. Also, we determined that the thermal resistance of PU foam increased with added clay, compared to that of pure PU foam. The cell size and the fraction of open cells of the precursor foam were controlled by the addition of clay to the polyurethane foam. Modified clays were found to be more efficient cell openers than the unmodified clay. In addition, the tensile strength and elongation of the polyurethane/clay porous nanocomposites were examined. Increasing clay content increased the mechanical properties of the composites, such as tensile strength, and elongation at break. However, increasing the content over 5 wt% deteriorated the properties of the composites. We found that the nanofillers(bentonite, closite 10A and closite 30B) improved the thermal stability of the nanocomposite foam. The nanocomposite foam containing 3 wt% of closite 30B exhibited the best tensile strength and thermal stability.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.111-122
• /
• 2004

The purpose of this study was to investigate the possibility of application of microwave energy for the fabrication of polymer/clay nanocomposite. APES/Clay nanocomposites were prepared at $130^{\circ}C$ for 30min with various amount of MMT or OMMT used the melt-intercalation method applied the classical and microwave heating source. APES/Clay samples were characterized by the means of X-ray diffractometry (XRD), transmitted electron microscopy (TEM) differential scanning calorimetry (DSC), and rheometric dynamic analysis (RDA). It was found that intercalated or exfoliated state of the samples could be controlled by the clay type, clay content, and heating type.