• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.1
• /
• pp.111-116
• /
• 2019

The fire detectors used in the engine rooms of ships offer only a slow response to emergencies because smoke or heat must reach detectors installed on ceilings, but the air flow in engine rooms can be very fluid depending on the use of equipment. In order to overcome these disadvantages, much research on video-based fire detection has been conducted in recent years. Video-based fire detection is effective for initial detection of fire because it is not affected by air flow and transmission speed is fast. In this paper, experiments were performed using images of smoke from a smoke generator in an engine room. Data generated using LBP and GLCM operators that extract the textural features of smoke was classified using SVM, which is a machine learning classifier. Even if smoke did not rise to the ceiling, where detectors were installed, smoke detection was confirmed using the image-based technique.

• Journal of Broadcast Engineering
• /
• v.24 no.1
• /
• pp.77-86
• /
• 2019

This paper proposes using machine-learning technology to analyze and classify historical collected documents based on them. Data is collected based on keywords associated with a specific domain and the non-conceptuals such as special characters are removed. Then, tag each word of the document collected using a Korean-language morpheme analyzer with its nouns, verbs, and sentences. Embedded documents using Doc2Vec model that converts documents into vectors. Measure the similarity between documents through the embedded model and learn the document classifier using the machine running algorithm. The highest performance support vector machine measured 0.83 of F1-score as a result of comparing the classification model learned.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.5
• /
• pp.533-539
• /
• 2019

This study proposes a malware classification model that can handle arbitrary length input data using the Microsoft Malware Classification Challenge dataset. We are based on imaging existing data from malware. The proposed model generates a lot of images when malware data is large, and generates a small image of small data. The generated image is learned as time series data by Dynamic RNN. The output value of the RNN is classified into malware by using only the highest weighted output by applying the Attention technique, and learning the RNN output value by Residual CNN again. Experiments on the proposed model showed a Micro-average F1 score of 92% in the validation data set. Experimental results show that the performance of a model capable of learning and classifying arbitrary length data can be verified without special feature extraction and dimension reduction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3708-3728
• /
• 2021

Indian herbal plants are used in agriculture and in the food, cosmetics, and pharmaceutical industries. Laboratory-based tests are routinely used to identify and classify similar herb species by analyzing their internal cell structures. In this paper, we have applied computer vision techniques to do the same. The original leaf image was preprocessed using the Chan-Vese active contour segmentation algorithm to efface the background from the image by setting the contraction bias as (v) -1 and smoothing factor (µ) as 0.5, and bringing the initial contour close to the image boundary. Thereafter the segmented grayscale image was fed to a leaky capacitance fired neuron model (LCFN), which differentiates between similar herbs by combining different groups of pixels in the leaf image. The LFCN's decay constant (f), decay constant (g) and threshold (h) parameters were empirically assigned as 0.7, 0.6 and h=18 to generate the 1D feature vector. The LCFN time sequence identified the internal leaf structure at different iterations. Our proposed framework was tested against newly collected herbal species of natural images, geometrically variant images in terms of size, orientation and position. The 1D sequence and shape features of aloe, betel, Indian borage, bittergourd, grape, insulin herb, guava, mango, nilavembu, nithiyakalyani, sweet basil and pomegranate were fed into the 5-fold Bayesian regularization neural network (BRNN), K-nearest neighbors (KNN), support vector machine (SVM), and ensemble classifier to obtain the highest classification accuracy of 91.19%.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.605-610
• /
• 2020

Software Defined Networking (SDN) is setting the standard for the management of networks due to its scalability, flexibility and functionality to program the network. The Distributed Denial of Service (DDoS) attack is most widely used to attack the SDN controller to bring down the network. Different methodologies have been utilized to detect DDoS attack previously. In this paper, first the dataset is obtained by Kaggle with 84 features, and then according to the rank, the 20 highest rank features are selected using Permutation Importance Algorithm. Then, the datasets are trained and tested with Convolution Neural Network (CNN) classifier model by utilizing deep learning techniques. Our proposed solution has achieved the best results, which will allow the critical systems which need more security to adopt and take full advantage of the SDN paradigm without compromising their security.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.3
• /
• pp.384-390
• /
• 2020

The reverberation effect on the sound when producing movies or VR contents is a very important factor in the realism and liveliness. The reverberation time depending the space is recommended in a standard called RT60(Reverberation Time 60 dB). In this paper, we propose a scene recognition technique for automatic reverberation editing. To this end, we devised a classification model that independently trains color images and predicted depth images in the same model. Indoor scene classification is limited only by training color information because of the similarity of internal structure. Deep learning based depth information extraction technology is used to use spatial depth information. Based on RT60, 10 scene classes were constructed and model training and evaluation were conducted. Finally, the proposed SCR + DNet (Scene Classification for Reverb + Depth Net) classifier achieves higher performance than conventional CNN classifiers with 92.4% accuracy.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.7-13
• /
• 2021

This paper introduces an algorithm that compensates for missing values after converting them into a format that can represent the probability for incomplete data including missing values in training data. In the previous method using this data conversion, incomplete data was processed by allocating missing values with an equal probability that missing variables can have. This method applied to many problems and obtained good results, but it was pointed out that there is a loss of information in that all information remaining in the missing variable is ignored and a new value is assigned. On the other hand, in the new proposed method, only complete information not including missing values is input into the well-known classification algorithm (C4.5), and the decision tree is constructed during learning. Then, the probability of the missing value is obtained from this decision tree and assigned as an estimated value of the missing variable. That is, some lost information is recovered using a lot of information that has not been lost from incomplete learning data.

• Journal of Broadcast Engineering
• /
• v.25 no.6
• /
• pp.845-853
• /
• 2020

In this paper, we propose a method for classifying environmental sound for selective noise cancellation in industrial sites. Noise in industrial sites causes hearing loss in workers, and researches on noise cancellation have been widely conducted. However, the conventional methods have a problem of blocking all sounds and cannot provide the optimal operation per noise type because of common cancellation method for all types of noise. In order to perform selective noise cancellation, therefore, we propose a method for environmental sound classification based on deep learning. The proposed method uses new sets of acoustic features consisting of temporal and statistical properties of Mel-spectrogram, which can overcome the limitation of Mel-spectrogram features, and uses convolutional neural network as a classifier. We apply the proposed method to five-class sound classification with three noise classes and two non-noise classes. We confirm that the proposed method provides improved classification accuracy by 6.6% point, compared with that using conventional Mel-spectrogram features.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.6
• /
• pp.2168-2187
• /
• 2021

The smart grid replaces the traditional power structure with information inventiveness that contributes to a new physical structure. In such a field, malicious information injection can potentially lead to extreme results. Incorrect, FDI attacks will never be identified by typical residual techniques for false data identification. Most of the work on the detection of FDI attacks is based on the linearized power system model DC and does not detect attacks from the AC model. Also, the overwhelming majority of current FDIA recognition approaches focus on FDIA, whilst significant injection location data cannot be achieved. Building on the continuous developments in deep learning, we propose a Deep Learning based Locational Detection technique to continuously recognize the specific areas of FDIA. In the development area solver gap happiness is a False Data Detector (FDD) that incorporates a Convolutional Neural Network (CNN). The FDD is established enough to catch the fake information. As a multi-label classifier, the following CNN is utilized to evaluate the irregularity and cooccurrence dependency of power flow calculations due to the possible attacks. There are no earlier statistical assumptions in the architecture proposed, as they are "model-free." It is also "cost-accommodating" since it does not alter the current FDD framework and it is only several microseconds on a household computer during the identification procedure. We have shown that ANN-MLP, SVM-RBF, and CNN can conduct locational detection under different noise and attack circumstances through broad experience in IEEE 14, 30, 57, and 118 bus systems. Moreover, the multi-name classification method used successfully improves the precision of the present identification.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.1
• /
• pp.71-79
• /
• 2009

Currently much research is being done on host based intrusion detection using system calls which is a portion of kernel based data. Sequence based and frequency based preprocessing methods are mostly used in research for intrusion detection using system calls. Due to the large amount of data and system call types, it requires a significant amount of preprocessing time. Therefore, it is difficult to implement real-time intrusion detection systems. Despite this disadvantage, the frequency based method which requires a relatively small amount of preprocessing time is usually used. This paper proposes an effective method for detecting denial of service attacks using the frequency based method. Principal Component Analysis(PCA) will be used to select the principle system calls and a bayesian network will be composed and the bayesian classifier will be used for the classification.