• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.4
• /
• pp.85-101
• /
• 2008

This study focuses on visual aesthetic factors in the apparel web site design. 103 undergraduates participated in the evaluation of six internet web sites. The evaluation were recorded and analyzed by using the inspection method and a questionnaire. Findings of this study can be summarized as follows: First, the result of SPSS-factor analysis shows that there are 2 distinct factors; 'classical aesthetics' and 'expressive aesthetics'. 'classical aesthetics' and 'expressive aesthetics' can be described by visual aesthetic design. This conceptual confusion relating to 'visual aesthetic design' can be clarified by these findings. Second, as a result of multiple regression analyses, 'classical aesthetics' and 'expressive aesthetics' have a positive influence on 'interactivity' and 'web site evaluation'. This research clarifies the concepts of 'engagement' of Rosen & Purinton as the 'interactivity' between users and web sites. Finally, this study suggests that 'good design' for internet web sites depends on understanding how to attain the appropriate balance between 'classical aesthetics' and 'expressive aesthetics', based on the target customer.

• Journal of Power Electronics
• /
• v.8 no.3
• /
• pp.210-216
• /
• 2008

This paper presents a classical speed controller (CSC) for vector controlled induction motors. The controller explores the use of a Fuzzy Logic controller in a classical form. The controller combines the advantages of the classical controller and the properties of intelligent controllers. The Fuzzy Logic controller idea is used to obtain the CSC output equation, whereby the CSC equation is based on the speed error and its change. The CSC parameters are calculated based on the motor mechanical equation and a predefined system performance. Once the CSC parameters are obtained, the defined speed performance can be achieved at all operating conditions. The application of the CSC to control the speed of a vector controlled induction motor is presented. Different induction motor ratings are used. Simulation results in all possible olperating conditions are presented. Results show that the CSC behaves as an expert controller to provide the predefined speed performance in all possible operating conditions. Based on the results obtained in this paper, the CSC is expected to become the ultimate solution for high-performance drives of the next generation.

• Korean Journal of Cognitive Science
• /
• v.6 no.1
• /
• pp.5-30
• /
• 1995

Fodor and his followers argue that connectionist model does not have compositional structure,or else it is merely an implementation of a classicist model.'Classical constityency'is used importantly to show connectionist model does not have compositional structure.However,in contrast Fodor and his followers,I maintain that it is possible for connectionist model to have compositional structure without attributing classical constituency to cognitive model,and the very classical consitiuency makes the connectionist model nonimplementational.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.4
• /
• pp.951-959
• /
• 2014

Recently Hazelton and Turlach (2009) proposed a weighted kernel density estimator for the deconvolution problem. In the case of Gaussian kernels and measurement error, they argued that the weighted kernel density estimator is a competitive estimator over the classical deconvolution kernel estimator. In this paper we consider weighted kernel density estimators when sample observations are contaminated by double exponentially distributed errors. The performance of the weighted kernel density estimators is compared over the classical deconvolution kernel estimator and the kernel density estimator based on the support vector regression method by means of a simulation study. The weighted density estimator with the Gaussian kernel shows numerical instability in practical implementation of optimization function. However the weighted density estimates with the double exponential kernel has very similar patterns to the classical kernel density estimates in the simulations, but the shape is less satisfactory than the classical kernel density estimator with the Gaussian kernel.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.621-626
• /
• 2010

According to development of method and device of Finite Element Analysis, the strength of welded joint is demonstrated by Finite Element Analysis not classical calculations. On the FEA, all of the joints for carbody are assumed to be ideal connections and the yield stress of welded joint is assumed to be the same to base metal. On these assumption, FEA is appropriate to evaluate the overall stability and strength of whole carbody. The classical calculation is appropriate to evaluate strength of specific welded joint and to determine the weld method and properties. Some project request strength calculation of the specific welded joints in addition to FEA, because of the demonstration of stability. The objective of this paper is the check of the consistency of the FEA result for the welded joints by the stress comparison between Detailed FE Model and classical calculation and the evaluation of the reliability of FEA result.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.149-152
• /
• 2002

The aim of this study is to analyse the problems occurred by using classical algorithm to synthesize the H$\infty$ optimal controller. The obtained result of analysis applied to the composition of algorithm for the new H$\infty$ optimal controller which was introduced in this study. The study investigates and compares H$\infty$ optimal controller formed by new algorithm with the one formed by classical algorithm. In particular, robustness related to the robust control is systematically described by using the composition of algorithm for the classical H$\infty$ optimal controller. In addition, the flow charts classified into classical algorithm and new one are discussed to synthesize the H$\infty$ optimal controller.

• Earthquakes and Structures
• /
• v.13 no.5
• /
• pp.465-471
• /
• 2017

This work derives a generalized time fractional differential equation governing wave propagation in a radially vibrating non-classical cylindrical medium. The cylinder is made of a transversely isotropic hyperelastic John's material which obeys frequency-dependent power law attenuation. Employing the definition of the conformable fractional derivative, the solution of the obtained generalized time fractional wave equation is expressed in terms of product of Bessel functions in spatial and temporal variables; and the resulting wave is characterized by the presence of peakons, the appearance of which fade in density as the order of fractional derivative approaches 2. It is obtained that the transversely isotropic structure of the material of the cylinder increases the wave speed and introduces an additional term in the wave equation. Further, it is observed that the law relating the non-zero components of the Cauchy stress tensor in the cylinder under consideration generalizes the hypothesis of plane strain in classical elasticity theory. This study reinforces the view that fractional derivative is suitable for modeling anomalous wave propagation in media.

• Journal of Korean Port Research
• /
• v.14 no.4
• /
• pp.395-406
• /
• 2000

In this paper, an improved high efficiency gantry crane for container transportation is designed. The basic concept of the designed crane can be used with modification of the classical gantry crane instead of changing lots of them. This crane can reduce the cycle time more than the classical gantry carne. The high efficiency gantry crane can improve the productivity of the container transportation job because of reducing cycle time. The loading and unloading capability are compared with classical crane. The result show that show that the proposed crane has better performances than classical type.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.37.2-37.2
• /
• 2019

To study the effects of central mass concentration on the formation and evolution of galactic bars, we run fully self-consistent simulations of Milky Way-sized, isolated galaxies with initial classical bulges. We let the mass of a classical bulge mass less than 20% of the total disk mass, and vary the central concentration of a dark matter halo. We find that both classical bulge and halo concentration delay the bar formation and weaken the bar strength. The presence of a bulge increases the initial rotational velocity near the center and hence the bar pattern speed. Bars in galaxies with a more concentrated halo slowdown relatively rapidly as they lose their angular momentum through interaction with the halo. In some of our models, bars do not experience slowdown at the expense of the decrease in their moment of inertia as the bar evolves, with the resulting pattern speed similar to that of the bar in the Milky Way.

• Advances in nano research
• /
• v.13 no.5
• /
• pp.453-463
• /
• 2022

This paper aims to investigate the vibration analysis of functionally graded porous (FGP) beams using State-space approach with several classical and non-classical boundary conditions. The materials properties of the porous FG beams are considered to have even and uneven distributions profiles along the thickness direction. The equation of motion for FGP beams with various boundary conditions is obtained through Hamilton's principle. State-space approach is used to obtain the governing equation of porous FG beam. The comparison of the results of this study with those in the literature validates the present analysis. The effects of span-to-depth ratio (L/h), of distribution shape of porosity and others parameters on the dynamic behavior of the beams are described. The results show that the boundary conditions, the geometry of the beams and the distribution shape of porosity affect the fundamental frequencies of the beams.