• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.330.1-330.1
• /
• 2014

개인용 노트북, 태블릿 PC, 핸드폰 기술 발전에 의해 언제 어디서나 데이터를 작성하고 기록하는 일들이 가능해졌다. 특히 cloud 시스템을 이용하여 데이터를 휴대기기에 직접 저장하지 않고 server에 기록하는 일들이 가능해짐에 따라 server 기기의 성능, server-room power 및 space 에 대한 관심이 증가하였다. Storage class memory (SCM) 이란 memory device와 storage device의 장점을 결합한 memory를 일컫는 기술로 현재 소형 디바이스 부분부터 점차 그 영역을 넓히고 있다. 그중 phase change material을 이용한 phase change memory (PCM) 기술이 가장 각광받고 있다. PCM의 경우 scaling됨에 의해 cell간의 열 간섭으로 인한 data 손실의 우려가 있어 cell의 면적을 최소화 하여 소자를 제작하여야 한다. 기존의 sputtering등의 PVD 방법으로는 한계가 있어 ALD 공정을 이용한 PCM에 대한 연구가 활발히 진행중이다. 특히 tellurium 원료기체로 silyl 화합물 [1]을 사용하여 주로 $Ge_2Sb_2Te_5$의 조성에 초점을 맞춰 진행되고 있으나, 세부 공정에 대한 기본적인 연구는 미비하다. 본 연구에서는 Ge-Sb-Te 3원계 박막을 형성하기 위한 Sb-Te 화합물의 증착 공정에 대한 연구를 수행하였다. 특히 원료기체로 Si이 없는 새로운 Te 원료기체를 이용하여 조성 조절을 하였고, 박막의 물성을 분석하였다. 또한 공정온도에 따른 박막의 물성 변화를 분석하였다.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1213-1219
• /
• 2008

This experimental study was to analyze thermal comfort and indoor air quality(IAQ) with ventilation and humidification in the classroom when system air conditioner was operated. The thermal comfort was estimated by the PMV index and the concentration of $CO_2$ and total suspended particle(TSP) were measured and compared with ventilation and humidification. As a result, the class room temperature distribution was $2{\sim}5^{\circ}C$ low during operating ventilation system and humidification. At 60% RH, PMV values of measuring points were ranged from +0.5 to -0.5 indicating optimal the range of thermal comfort. The average concentration of $CO_2$ gas and TSP were reduced 645 ppm, 0.17 mg/$m^3$ respectively, during operating the ventilation system. From the results, to maintain comfortable environment in the heated classroom, the ventilation and humidification were needed in winter season.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.2
• /
• pp.171-177
• /
• 2011

Tensile tests were conducted at low temperatures for the steel materials which are used for outer shell of the vessels making transit through the polar regions. The selected steel materials were GL-DH32, GL-DH36 and GL-EH36. In comparison with the results at room temperature, the yield stress increases approximately by 10 to 13 percent at $-30^{\circ}C$ and by 13 to 19 percent at $-50^{\circ}C$ while the tensile strength increases about by 9 percent at $-30^{\circ}C$ and 11 to 14 percent at $-50^{\circ}C$. To obtain true stress-true strain, i.e. correct plastic hardening characteristics, Bridgman's(1952) necking correction formula was introduced taking triaxial state of stresses after onset of diffuse necking into consideration. Photographs of fractured surfaces were taken by using Scanning Electron Microscope immedately after tensile tests completed and one for GL-EH36 has been presented in this paper.

• Journal of the Korean Institute of Educational Facilities
• /
• v.14 no.3
• /
• pp.17-26
• /
• 2007

This paper reviews KSG2010(Korean Industrial Standard for Student's Desk and Chair) compared to student's body size and suggests its new design guideline. It is found that the chairs are too high to sit straight up, and it is not easy to sit at student's ease because of backbone rest bar not existed in a right place. It is also found that the desks are too high to sit at desk to accept student legs under a drawer. So student's visibility range becomes decreased and it produces a harmful posture for eye protection. This paper also found that step number of student's desks and chairs needs to expand to 12 different steps inserted 5 steps between the existing 7 steps. A reason is that there is gap between the sizes of desk and chair and human height and width. Another reasons is that it is difficult to arrange desks and chairs appropriated to student body sizes in a class room.

• Journal of the Korean Institute of Educational Facilities
• /
• v.14 no.3
• /
• pp.27-35
• /
• 2007

The purpose of this research is to analyzing the welfare function of the senior citizen with similar type of compounding the school facility, to analyze the problematical point of present condition. And also propose the spatial constitution which the student and the regional senior citizen are easy to utilize on the basis of the result. In a type of educational facility composition, it became clear that a ratio and the inflection order that elderly welfare facilities occupied of vacant class room were low. In other words, in composition of a school facilities, elderly welfare facilities can be said to be an important problem. As a result of having analyzed an existing compound facilities, there was limited interchange of student and a the aged. In addition, there were problems such as learning environment by an intersection of circulation. Therefore, composition of educational facility and elderly welfare facilities is not space composition that is intersection of simple specification function. In other words, a program of the common space which is necessary for the local community formation is necessary. Setting of semi-public area proposes the function of the existing facility and actual condition of spatial use in prerequisite.

• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.940-951
• /
• 2011

Reaction of 1-methylpyrimidine-(1H,3H,5H)-2,4,6-trione (1-MBA 1) as an unsymmetrical barbituric acid with cyanogen bromide and various aldehydes in the presence of triethylamine and/or pyridine afforded diastereomeric mixtures of new class of heterocyclic stable 5-aryl-1,1'-dimethyl- and 5-aryl-3,1'-dimethyl-1H,1'H-spiro[furo[2,3-d]pyrimidine-6,5'-pyrimidine]2,2',4,4',6'(3H,3'H,5H)-pentaones which are dimeric forms of 1-methyl barbiturate at the range of $0^{\circ}C$ to room temperature. In the reaction of some aldehydes with 1-MBA and BrCN were afforded a mixture of diastereomers. Another two aldehydes such as 4-cyano- and 2-hydroxybenzaldehydes gave exclusively two diastereomers in which binded to the salt of triethylammonium hydrobromide by intermolecular H-bond in ratio of 1:1. 4-Hydroxybenzaldehyde and 2-pyridinecarbaldehyde gave exclusively one diastereomer under the same condition. Aldehydes possessing strong electron-donor were produced exclusively two geometric isomers of Knoevenagel adduct (E- and Z-isomers). The structures of compounds were deduced by $^1H$ NMR, $^{13}C$ NMR and FT-IR spectroscopy. Mechanism of the formation is discussed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.854-860
• /
• 2004

"Research and Development of Melt-Growth Composite (MGC) Ultra High Efficiency Gas Turbine System Technology" program has been started in JFY2001. The main objective of the program is to establish basic component technologies to apply MGC material to an efficient gas turbine system successfully. It is known that MGC material maintains its mechanical strength at room temperature up to about 2000 K, which is ideal for the high temperature gas turbine. The purposes of the present study are to develop the cooling structure of the gas turbine combustor liner where MGC material is applied as the heat shield panel, also to develop the low NOx combustion system for a 1970 K (1700 deg.C) class gas turbine combustor. To start with, basic heat transfer characteristics were investigated by one-dimensional calculation and heat transfer experiment for the cooling structure. Axially staged configuration and fuel preparation were investigated by CFD calculation and experiments for the low NOx combustor.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.77-80
• /
• 2010

A series of hydraulic tests of a Lox pump are performed using water at a room temperature. According to the test results, the Lox pump satisfies its design requirement but both the head and the efficiency do not fully follow the conventional similarity rule. The deviation of the head from the rule is assumed to be due to the increased volute loss at high rotational speed. Furthermore, it is found that when the pump rotates with the flow ratio less then the design requirement the leakage flowrate seems to be increased.

• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.6
• /
• pp.575-580
• /
• 2011

Icing problem of ice-strengthened vessels is an important issue when operating in low temperature environment and it can cause damage to deck machineries and emergency equipments. Many ice-strengthened vessels have since been constructed and operated in accordance with the ice class rules such as Det Norske Veritas (DNV), Russian Maritime Register of Shipping (RS), American Bureau of Shipping (ABS) and so on. Therefore winterization is defined as the preparation of a ship for safe operation. In this research, anti-icing performance tests of weather-tight door have been carried out at various temperature conditions($5^{\circ}C$, $-10^{\circ}C$, $-20^{\circ}C$, $-30^{\circ}C$, $-40^{\circ}C$) in the low temperature cold room facility and then, ambient temperature, specimen temperature, electric current and temperature of heating cable were measured during the test operations. This research describes the construction guidelines of weather-tight door based on anti-icing test results to apply to the full-scale vessels.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.3
• /
• pp.1-12
• /
• 2017

This paper deals with the effectiveness of a fiber optic solar lighting system that uses a Fresnel lens mounted on a two-axis solar tracker. A series of comparative analyses were made concerning its performance as compared to fluorescent lighting by using a simulation model based on ECOTECT and RADIANCE as well as referring to actual data. ECOTECT was used to model the test room (space) while RADIANCE was used for its indoor lighting conditions (environment). It was found that the average indoor light levels of fluorescent lighting fully satisfy the KS standard (KS A 3011, general office, class [G]: 300-400-600 lux) whereas those of the solar lighting with light diffusers depends on the occlusion factor of roller shades installed on the south window.