• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2004년도 추계학술논문발표회 논문집
• /
• pp.206-212
• /
• 2004

• 한국도서관정보학회지
• /
• 제32권2호
• /
• pp.323-347
• /
• 2001

이 연구는 군사학 분야의 인터넷 학술정보자원을 효율적으로 조직, 활용하기 위한 청문서 분류체계의 모형을 제시하기 위해 시도된 것이다. 이를 위해, 우선 일반문헌분류표 가운데 군사정보에 관한 항목을 상세하게 전개하고 있는 LCC의 Class U(Military Science)와 Class V(Naval Class)를 상세히 분석하고, 웹 문서 분류체계 중 체계적 분류방식을 도입하고 있는 Yahoo!의 분류항목(처음/정부/군사)을 비교 분석하였다. 아울러 웹 문서 분류체계의 새로운 설계를 위해 기존의 Yahoo! Korea와 심마니, Yahoo! US를 종합적으로 비교 분석하였다. 이와 같은 비교 분석의 결과를 바탕으로, 실제적인 분류체계의 모형을 제시하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1146-1149
• /
• 2004

A new developed impulse current test system(100kV, 250kJ)is presented, which can carry out all impulse current and performance tests on surge arrester sections with rated voltage up to 12kV according to IEC 60099-4(2001). The maximum achievable peak value is 200kA for the impulse current $4/10{\mu}s$ and 60kA for the $30/80{\mu}s$ and $8/20{\mu}s$. The long duration current impulse is realized from class 1 to class 5. The digital transient recorder(4 channels 60MS/S 10bit) is used for measuring AC voltage, impulse current, reference voltage and leakage current. The complex control, measuring, evaluation and data storage system is controlled by one industrial PC system.

• 조명전기설비학회논문지
• /
• 제22권4호
• /
• pp.54-60
• /
• 2008

2002년부터 시행되어오고 있는 제조물 책임법에 의해 사고케이블의 원인분석과 사고패턴에 대한 데이터베이스화가 중요하다. 더욱이 가속열화상태에서 전력케이블 사고의 패턴 및 모의실험은 데이터베이스 시스템 구축에 필요하다. 본 논문에서는 열 열화 따른 22.9[kV]이하 케이블의 열 충격시험을 수행하였다. 이 시험은 IEC60811-3-1에 따른다. 시험결과로부터, 22.9[kV]급 A사 전력케이블은 표면이 변색되었고 길이방향으로 급격하게 감소되었다. 특히, A사 전력케이블의 열 중량 특성이 심하게 변함에 따라, 케이블 제조상의 문제일 것이라 추측된다. 만약 전력케이블의 제조상의 결함에 의한 것이라면, 피해자들은 PL환경 하에 손해배상을 받을 수 있을 것이다.

• Restorative Dentistry and Endodontics
• /
• 제35권1호
• /
• pp.20-23
• /
• 2010

마우스가드는 19세기 복싱선수들의 구강내 열상과 연조직의 외상을 막기 위해 사용되었다. 최근에는 치과영역에서 다양하게 사용되고 있으며, 운동 보호 장치, 미백용 장치물, 교정용 유지 장치, 수술용 가이드 장치, 턱관절 안정 장치물 등에 쓰이고 있다. 습관적인 이 악물기에 의한 반복적인 5급 수복물의 탈락은 우선 이 악물기에 의한 스트레스를 조절한 후 수복이 이루어져야 한다. 마우스가드는 이 악물기에 의한 스트레스를 조절하는 장치물로 사용할 수 있다. 본 증례에서는 마우스가드로 치아에 가해지는 스트레스는 감소시키는 것에 대해 논의 할 것이다. 마우스가드를 사용함으로써 반복적인 탈락을 나타내는 5급 수복물의 유지에 단기적으로 만족스러운 결과를 얻을 수 있었다. 만약 환자 및 치과의사가 이 악물기로 반복적인 탈락을 나타내는 수복물로 고생하고 있다면, 마우스가드의 보조적인 사용이 치경부 수복물의 유지에 도움을 줄 수 있을 것이다.

• 구강회복응용과학지
• /
• 제21권1호
• /
• pp.69-81
• /
• 2005

The objective of this study was to evaluate the toothbrush abrasion characteristics of class V restorations. Thirty extracted human premolars, which were collected from oral surgery clinics were used. We mounted five teeth in a metal ring mold of 50 mm in diameter and 15 mm in height using chemically cured acrylic resin. Class V cavities were prepared in lingual cervical root surfaces and restored using one of following restorative materials : Dentin Conditioner/Fuji II LC (Group FL), All Bond II/Z-250 (Group ZT), One-up Bond F/Palfigue Estelite (Group PE), F2000 Primer/Adhesive (Group FT), and Prime & Bond 2.1/Dyract AP (Group DR). They were stored under distilled water at $37^{\circ}C$ for seven days. The toothbrush abrasion test was conducted using a wear testing machine of pin-on disk type under a load of 1.5 N for 100,000 cycles. We have examined the bonded interfaces, the changes of surface roughness and color of abraded surfaces. From this experiment, the following results were obtained. 1. The change of surface roughness showed high degree: RMGIC>compomer>composite resin (p<0.05). 2. Because of the protrusion and missing of filler particles, SEM observation of abraded surfaces of RMGIC and compomers revealed the increase of surface roughness due to the selective removal of matrix resin. 3. The color change by toothbrush abrasion was affected in large part by the change of $L^*$ and $b^*$ of resin composites (p<0.05). 4. The color change by toothbrush abrasion was so small to detect by human eyes. 5. SEM observation of abraded surfaces revealed the interface bonding was the best in the FT group.

• Journal of Welding and Joining
• /
• 제28권5호
• /
• pp.69-74
• /
• 2010

Irradiation behavior of the reactor pressure vessel SA508 class 3 steel weld metals was examined by Charpy V Notch impact specimens. The specimens were exposed to a fluence of $2.8{\times}1019$ neutrons(n)/$cm^2$(E>1 MeV) at $288^{\circ}C$. The irradiation damage of weld metal was evaluated by comparison between unirradiated and irradiated specimens in terms of absorbed energy and lateral expansion. The specimens for neutron irradiation were welded by submerged arc welding process at a heat input of 3.2 kJ/mm which showed good toughness in terms of weld microstructure, absorbed energy and lateral expansion. The post-irradiation Charpy V notch 41J and 68J transition temperature elevation were $65^{\circ}C$ and $70^{\circ}C$, respectively. This elevation was accompanied by a 20% reduction in Charpy V notch upper shelf energy level. The lateral expansion at 0.9mm irradiated Charpy specimens showed temperature elevation of $65^{\circ}C$ and was greatly decreased due to radiation damage.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.46-49
• /
• 2005

This paper presents the electrical characteristics of metal oxide varistors for lightning surge arresters. ZnO varistors were fabricated with typical ceramic production methods and two types of varistors were also prepared to be compared. The nominal discharge current and line discharge class of those varistors are $10kA(8/20{\mu}s)$ and class 3, respectively. The diameter of varistors manufactured and prepared were in the range of 61.6~65.0mm and the thickness of those were in the range of 27~42.52mm. The reference and residual voltage were tested and reference and residual voltage per 1mm and the ratio of reference and residual voltage were calculated. The reference voltage per 1mm of varistors manufactured was about 175V/mm but that of A's and B's varistors was nearly 200V/mm. The residual voltage exhibited the same trends as the reference voltage, so the reference and residual voltage per 1mm of domestic varistors should be increased. According to the results of tests, it is thought that if the reference and residual voltage per 1mm were increased to 200V/mm and 330V/mm, domestic ZnO varistors would be possible to apply to the station class arresters in the near future.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.56-62
• /
• 2000

The purpose of this study was to assess the effects of restorative materials on the marginal leakage of wedge-shaped class V cavity. The study was performed in vitro in 25 defect-free permanent, extracted teeth. Wedge-shaped class V cavities were prepared and then the teeth were randomly selected and restored according to the following. Group A : restoration with Tetric Ceram(composite resin) Group B : restoration with Tetric flow(flowable resin) Group C : restoration with Compoglass after acid etching(compomer) Group D : restoration with Compoglass(compomer) Group E : restoration with Fuji II LC improved(resin-modified GIC) After thermocycling, the specimens were immersed in 5% basic fuchsin solution for 6 hours and sectioned longitudinally through the center of the restoration. The degree of marginal leakage was measured as the extent of dye penetration under the stereomicroscope. The data were analysed using one-way ANOVA. When significant differences found, multiple comparisons were made using Duncan's Multiple Range Test. The results were as follows: 1. The occlusal margins of all groups except for Fuji II LC improved showed lesser leakage than gingival margins and there was statistically significant difference(p<0.05). 2. At the occlusal margins, group A, B showed same marginal leakage scores, and others were decreased as group C, D, E in that order. There were statistically significant difference between group A, Band group D, E, group C and group E(p<0.05). 3. At the gingival margins, group B, C showed same marginal leakage scores, and others were decreased as group A, D, E in that order. But there was statistically significant difference between group B, C and group E(p<0.05). 4. In the Compoglass restoration, acid-etching technique was beneficial for marginal sealing ability at all of margins. But there was no statistically significant difference (p>0.05). In the restorations for wedge-shaped class V cavities, resin restoration with acid etching technique is recommended.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.192-192
• /
• 2010

DAPAS (Development of Advanced Power system by Applied Superconductivity technologies) program that the, superconductivity national program has been started one of the 21C frontier programs from 2001 in Korea. The 3rd phase of DAPAS program was started at April 2007, and the ultimate goal of HTS cable project is to develop 154kV, 1GVA class HTS cable. The structure of 154kV, 1GVA HTS cable is single core with cold dielectric insulation. The cable core consists of the former, conduction layer, electrical insulation layer, shielding layer. The cable cryostat consists of two corrugated seamless aluminum tubes as its high sealing reliability, the tubes separated through a spacer arrangement. Outdoor termination was developed by LS cable and cryogenic system by CVE for 154kV, 1GVA class HTS cable. The 154kV, 1GVA HTS cable will be installed and be tested in KEPCO Gochang Testing Center from June 2010.