• Journal of Chest Surgery
• /
• v.21 no.3
• /
• pp.567-573
• /
• 1988

Coarctation of the aorta is classically a congenital narrowing of the upper descending thorac aorta adjacent to the site of attachment of the ductus arteriosus which is sufficiently severe that there is a pressure gradient across the area. Recently we have experienced two cases of coarctation of the aorta and successfully performed resection of the sites of coarctation and end to end anastomosis of the aorta. The first case was a juxtaductal type of coarctation of the aorta with PDA and the pathology of the lesion was a diaphragm with central narrow opening. And the resection length was about 0.5cm and aortic clamping time was 20 minutes. The second case was also juxtaductal type coarctation of the aorta with mild tubular hypoplasia of aortic isthmus, left SVC and the pathology was also a diaphragm with central narrow opening. And the resection length was about 0.5cm and aortic clamping time was 29 minutes. Both postoperative course was uneventful and the patients were discharged two weeks after operation.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.9
• /
• pp.1-8
• /
• 2020

In this study, the optimal design of the multi-cavity mold layout and packing pressure for the automobile TCU connector cover is determined based on the injection molding analysis and the desirability function method for multi-characteristic optimization. The design characteristics to be optimized are the warpage and sink marks of the product, the scrap of the feed system, and the clamping force. The optimal design is determined by performing injection molding analysis and desirability analysis for design alternatives defined by a complete combination of five mold layouts and six-level packing pressure. The optimal design shows that the desirability values for individual characteristics are quite high and balanced, and the resulting values of individual characteristics are satisfactorily low.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.13-16
• /
• 2002

In this research, the design methods of the rocket joint parts were suggested. In the first section, nonlinear finite element analyses for joint parts of a composite pressure tank were performed. In the analyses, the detailed finite element modeling was performed and complex boundary conditions(contact problem, clamping force) were considered. Secondly, several guidelines for the design of joint parts were suggested. The parametric study for geometric design variables was peformed. Finally, the parametric study result was categorized for the multi-Joint part design of the axi-symmetric composite structure.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.94-101
• /
• 2013

Injection molding process is one of the most important methods to produce plastic parts with high efficiency and low cost. The objective of this study is to implement the best plastic injection molding process for LED TV speaker frame. Moldflow analysis and simulation of plastic injection molding process were carried out in order to predict optimal modeling operation conditions and then injection molded part was produced various type of resin temperature, filling time and injection pressure variation. the result was that the best injection molding condition is set as 60bar pressure, 2sec filling time and $310^{\circ}C$ degree. The study result would be useful to variety of plastic injection molding process.

• Journal of Chest Surgery
• /
• v.6 no.1
• /
• pp.47-50
• /
• 1973

A 16 years old Korean boy was admitted with chief complaints of exertional dyspnea, precordial pain, and headache. His brachial and femoral arterial pressure were 180/100 mmHg and 120/95 mmHg respectively. Aortogram by Seldinger technique revealed postductal adult type coarctation and marked dilation of the poststenotic aortic portion. With arfonad 40mg infusion during clamping, resection of the coarctation segment, and end-to-end anastomosis of the aorta maximal brachial arterial pressure was maintained below 180 mmHg. Postopertive course was uneventful and the patient was discharged two weeks after operation. Precordial pain and headache diasappeared. Brachial and fernoral arterial pressure were 140/80 mmHg and 110/90 mmHg at the time of discharge.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.2
• /
• pp.21-27
• /
• 2007

This paper deals with the issue of trajectory tracking control of a clamping cylinder for injection moulding machine, which is directly driven by speed controlled hydraulic pump in combination with AC servomotor. As a fundamental step prior to tracking controller design, feedback control system is developed by implementing a position control loop parallel with a system pressure control loop. A sliding mode controller combining velocity feedforward scheme is developed for enhancing the tracking performance. Consequently a significant reduction in tracking error is achieved for both position and pressure control applications.

• YAKHAK HOEJI
• /
• v.36 no.4
• /
• pp.379-389
• /
• 1992

In order to investigate the effect of nifedipine, $Ca^{+2}$ channel antagoninst, on the action of some drugs participating in blood pressure, this experiment was peformed in rabbits. Nifedipine decreased the pressor actions of norepinephrine, angiotensin and carotid artery clamping, but did not affect the pressor actions of tyramine and depressor actions of acetylcholine and pilocarpine. Nifedipine inhibited the potentiated pressor action of norepinephrine and angiotensin, but did not influence the potentiated pressor action of tyramine in rabbits pretreated with chlorisondamine, ganglionic blocking agent. Nifedipine weakened the potentiated pressor action of norepinephrine, did not affect the pressor action of angiotensin and the potentiated pressor action of tyramine in rabbits pretreated with debrisoquine, sympathetic neuronal blocking agent.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.7
• /
• pp.642-650
• /
• 2008

In this paper, structural behavior of Gasket and GDL of a PEMFC stack is studied to improve the performance and to secure the safety. In the Gasket analysis Mooney-Rivlin strain energy function is used to consider hyperelasticity of load and displacement. The material properties is determined by testing specimens of the gasket at uni-axial and equi-biaxial mode and compared with finite element analysis results. By measuring a thickness change, the material property of GDL is determined. The pressure drop of a unit cell is measured along the channel for the clamping force. A cross sectional change of channel base on the experimental data is obtained experimentally and compare with FEM analysis results.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.73-81
• /
• 2014

In this paper, multiple gate locations and process conditions under concern are automatically optimized by considering robustness to minimize the injection pressure required to mold an automotive dashboard. Computer simulation-based experiments using orthogonal arrays(OA) and a design-range reduction algorithm are consolidated into an iterative search scheme, which is then used as a tool for the optimization process. The robustness of a design is evaluated using an OA-based simulation of process fluctuations due to noise as well as the signal-to-noise ratio. The optimal design solution for the automotive dashboard shows that the robustness of the injection pressure is significantly improved when compared to the initial design. As a result, both the die clamping force and the pressure distribution in the part cavity are also much improved in terms of their robustness.

• Composites Research
• /
• v.36 no.6
• /
• pp.422-428
• /
• 2023

The electrical contact resistance between the bipolar plate (BP) and the carbon felt electrode (CFE), which are in contact by the stack clamping pressure, has a great impact on the stack efficiency because of the relatively low clamping pressure of the vanadium redox flow battery (VRFB) stack. In this study, a polyethylene (PE) composite-CFE hybrid bipolar plate structure is developed through a local heat welding process to reduce such contact resistance and improve cell performance. The PE matrix of the carbon fiber composite BP is locally melted to create a direct contact structure between the carbon fibers of CFE and the carbon fibers of BP, thereby reducing the electrical contact resistance. Area specific resistance (ASR) and gas permeability are measured to evaluate the performance of the PE composite-CFE hybrid bipolar plate. In addition, an acid aging test is performed to measure stack reliability. Finally, a VFRB unit cell charge/discharge test is performed to compare and analyze the performance of the developed PE composite-CFE hybrid BP and the conventional BP.