• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.91-99
• /
• 2010

Extraction and bleaching of citric acid- and pepsin-soluble collagens (ASC and PSC, respectively) from shark (Isurus oxyrinchus) skin and muscle were investigated. The optimal sodium hydroxide concentration for extraction was 0.3 M and the optimal treatment time for removal of foreign material was 9 h. The optimal sodium hypochlorite level for bleaching of shark skin was 0.48% (w/v), and sodium hypochlorite was a better bleaching agent than acetone, hydrogen peroxide (10%, v/v), sodium sulfite (0.48%, w/v), sodium thiosulfate (0.48%, w/v), or sodium metabisulfite (0.48%, w/v). Optimal citric acid concentration and extraction time for ASC were 0.3 M and 72 h, respectively, whereas optimal conditions for extraction of PSC were treatment with 0.1 M citric acid containing 0.1% (w/v) pepsin for 24 h. Protein contents in ASSC (acid-soluble shark skin collagen), ASMC (acid-soluble shark meat collagen), PSSC (pepsin-soluble shark skin collagen), and PSMC (pepsin-soluble shark meat collagen) were 88.66%, 83.09%, 90.33%, and 84.81% (on a dry weight basis), respectively, similar to that of commercial marine collagen (88.86%). Net collagen contents of ASSC, ASMC, PSSC, and PSMC, calculated from hydroxyproline levels, were 70.31%, 25.70%, 83.09%, and 32.94%, respectively. The yields of freeze-dried ASSC, ASMC, PSSC,and PSMC were 57.22%, 53.85%, 23.28%, and 20.61%.

• Food Science and Preservation
• /
• v.11 no.4
• /
• pp.530-537
• /
• 2004

This study was conducted to determine the inactivation effect of electrolyzed water and organic acids either alone or in combination on L. monocytogenes or natural microflora on lettuce. Acidic electrolyzed water completely inactivated L. monocytogenes in broth system within 60 sec, but alkalin electrolyzed water caused approximate 1.7 log CFU/g reduction. However, acidic electrolyzed water reduced only 2.5 log CFU/g of L. monocytogenes on lettuce, and similar antimicrobial effect was observed with alkalin electrolyzed water. In the meantime, acidic and alkaline electrolyzed water caused approximately 2 log CFU/g reduction compared to control, whereas both electrolyzed water combined with $1\%$ organic acids ranged from 2.6 to 3.7 log CFU/g reduction. Among the organic acids, both electrolyzed water combined with $1\%$ citric acid showed the strongest synergistic antimicrobial effect to reduce L. monocytogenes on lettuce as well as total counts, yeast and molds. When antimicrobials, alone or in combination were treated into L. monocytogenes inoculated lettuce at $5^{\circ}C\;and\;15^{\circ}C$ for designed periods, the combined alkalin electrolyzed water with $1\%$ citric acid showed the greatest potential to inhibit growth of the bacteria. According to Scanning Electron Microscopy(SEM), the treatment of electrolyzed alkali water in combination with $1\%$ citric acid highly reduced the growth of the L. monocytogenes compared to single treatment and resulted in causing the destruction of cell membrane.

• Microbiology and Biotechnology Letters
• /
• v.13 no.3
• /
• pp.245-250
• /
• 1985

In order to increase citric acid productivity. several attempts were made; isolation and characterization of the mutant strain produced citric acid in a high yield, citric acid fermentation in a medium containing relatively higher amount of glucose and citric acid production by the use of semicontinuous ceil recycle system. By the treatment of Candide lipolytica S-109 with NTG, a mutant J-24 was selected as the highest producer of citric acid among the strains formed larger CaCO$_3$ lytic zone. it produced 72g/1 citric acid in 10％ glucose medium. Because mutant J-24 produced 85g/l citric acid and showed 53％ yield in 16％ glucose medium, several factors were adjusted to increase the yield in 16％ glucose medium. 0.8-1.0$\times$10$^{-3}$ P/C ratio, 0.15％ urea, 0.25％ yeast extract were suitable at citric acid production in 16％ glucose medium. Under this condition, J-24 strain produced 93g/l citric acid and showed 58％ yield. Semicontinuous cell recycle system was used to protons the effective production phase, to minimize the product inhibition and to shorten the lag phase. The productivity of semicontinuous cell recycle system was 0.79g/l h while that of batch system was 0.53g/l.h

• Journal of Fashion Business
• /
• v.13 no.1
• /
• pp.102-114
• /
• 2009

Chitosan is a polysaccharide with cationic amino groups in its structure and has useful properties as functional materials. Various end-use developments of chitosan are in progress. When the cotton fabric is pretreated with chitosan, the hand property of cotton fabric may be improved expecially for the summer apparel. In this study, as a cross-linking agent to introduce chitosan into cotton, BTCA(butane-1,2,3,4-tetracarboxylic acid) or CA(citric acid) was added in order to prevent detachment of chitosan by the cross-linking. During the cross-linking procedure, via the padding-drying-heat setting, amino groups of chitosan and hydroxyl groups of cotton, carboxyl groups of BTCA/CA are cross-linked by forming anhydrous cyclic rings. Since BTCA has four carboxyl groups, cross-linking by thermal treatment is easy, leading to the trials in wrinkle-recovery treatment of cotton fabrics. However, the high price of the BTCA reagent has been a shortcoming in the actual application for industrial use. Therefore, in this study, we tried the application of CA having three carboxyl groups, which is relatively low priced, as the substituting cross-linking agent. The hand of the treated fabrics were evaluated by measuring physical properties. In addition, based on the physical properties, three-dimensional images were introduced by using 3D CAD systems and results were compared.

• Journal of Environmental Science International
• /
• v.27 no.1
• /
• pp.1-10
• /
• 2018

A continuous process of persulfate oxidation and citric acid washing was investigated for ex-situ remediation of complex contaminated soil containing total recoverable petroleum hydrocarbons (TRPHs) and heavy metals (Cu, Pb, and Zn). The batch experiment results showed that TRPHs could be degraded by $Fe^{2+}$ activated persulfate oxidation and that heavy metals could be removed by washing with citric acid. For efficient remediation of the complex contaminated soil, two-stage and three-stage processes were evaluated. Removal efficiency of the two-stage process (persulfate oxidation - citric acid washing) was 83% for TRPHs and 49%, 53%, 24% for Cu, Zn, and Pb, respectively. To improve the removal efficiency, a three-stage process was also tested; case A) water washing - persulfate oxidation - citirc acid washing and case B) persulfate oxidation - citric acid washing (1) - citric acid washing (2). In case A, 63% of TRPHs, 73% of Cu, 60% of Zn, and 55% of Pb were removed, while the removal efficiencies of TRPHs, Cu, Pb, and Zn were 24%, 68%, 62%, and 59% in case B, respectively. The results indicated that case A was better than case B. The three-stage process was more effective than the two-stage process for the remediation of complex-contaminated soil in therms of overall removal efficiency.

• Journal of Periodontal and Implant Science
• /
• v.37 no.3
• /
• pp.575-584
• /
• 2007

The present study was performed to evaluate the effect of citric acid on the change of implant surface microstructure according to application time. Implants with pure titanium machined surface, and HA coated surface were utilized. Pure titanium machined surface and HA coated surface were rubbed with pH 1 citric acid for 30s., 45s., 60s., 90s., and 120s. respectively. Then, the specimens were processed for scanning electron microscopic observation. The following results were obtained. 1. The specimens showed a few shallow grooves and ridges in pure titanium machined surface implants. The roughness of surfaces conditioned with pH 1 citric acid was slightly increased. 2. In HA-coated surfaces, round particles were deposited irregularly. The specimens were not significant differences within 45s. But, began to be changed from 60s. The roughness of surfaces was lessened and the surface dissolution was increased relative to the application time. In conclusion, pure titanium machined surface implants and HA coated surface implants can be treated with pH 1 citric acid for peri-implantitis treatment if the detoxification of these surfaces could be evaluated.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.379-390
• /
• 1998

In endodontic treatment, calcium hydroxide has been used as intracanal medicament. Although calcium hydroxide should be removed thoroughly before permanent root canal filling, no effective method for its removal has been reported. Because of irregularity of root canal walls, root curvatures and anatomic variations, it is insufficient to remove calcium hydroxide from the canal wall only by mechanical instrumentation Considering the chemical effects of irrigants on calcium hydroxide, $Ca^{++}$ dissolving effect from two calcium hydroxide products is investigated, using dis- tilled water, NaOCl, citric acid and EDTA. Vitapex$^{(R)}$ 0.1g and calcium hydroxide 0.03g were dissolved in distilled water, 5% NaOCl, 50% citric acid and 17% EDTA respectively, at 1, 3, 5, 10min. time interval. The solution was filtered using filter paper(pore size $5{\mu}m$) and $Ca^{++}$ concentration was determined by ion chromatography. The result were as follows : 1. Distilled water, NaOCl, citric acid and EDTA abstracted more $Ca^{++}$ from calcium hydroxide than Vitapex$^{(R)}$ except NaOCl 1, 5, 10 time interval. 2. EDTA and citric acid abstracted more $Ca^{++}$ from Vitapex$^{(R)}$ and calcium hydroxide than distilled water or NaOCl. The overall result support the view that water-based calcium hydroxide product is easily removed than oil-based calcium hydroxide product and EDTA, citric acid are more effective in $Ca^{++}$ elution than NaOCl or distilled water.

• Corrosion Science and Technology
• /
• v.8 no.6
• /
• pp.209-216
• /
• 2009

In this study the effect of different surface finishing techniques on the pitting corrosion behaviour of a commercial 304 stainless steel alloy was investigated. Surface finishing methods were divided into two categories, i.e. mechanical and chemical. Mechanical treatment methods include power tooling such as grinding, emery paper brushing, stainless steel wire brushing and stainless steel shot blasting. Chemical treatment methods include chemical passivation (phosphoric acid, citric acid, nitric acid) and electro-cleaning (phosphoric acid and citric acid). Potentiodynamic polarization experiments were carried out in 3.5 wt. % NaCl solution at room temp. (20 $^{\circ}C$). The results showed that chemical treatment methods improved the corrosion resistance of stainless steel 304, measured in terms of pitting potential ($E_{pit}$). Corrosion resistance of the specimens was increased in the order of; electro-cleaning > manual passivation > mechanical cleaning. Surface of electro-cleaned specimens was smoother than rest of the surface treatment methods. Chrome content in chemically treated specimens was higher than in mechanically treated specimens as shown by EDX analysis.

• Journal of Korean Academy of Nursing
• /
• v.31 no.2
• /
• pp.268-278
• /
• 2001

Many women in the world have suffered from anemia produced by menstruation, pregnancy and delivery. In the theory of oriental medicine, a sour taste is believed to have a tonic effect on the blood. Thus this paper is to investigate the effect of sour tastes on the improvement in anemia-induced female mice, using citric acid and Fructus schizandrae(五味子). The method used in this experiment was the change of RBC, WBC, Hemoglobin, Hematocrit, Fe, and TIBC in the blood of female mice who were fed citric acid and Fructus schizandrae(五味子). The results obtained were as follows ; 1. Compared with the control group (anemia- induced group without treatment), the mean number of RBC in the blood of mice was significantly increased only in evaluating the change of sample group fed Fructus schizandrae (五味子) 500mg/kg. 2. Compared with the control group (anemia- induced group without treatment), the mean number of WBC in the blood of mice was not significantly larger in both sample groups fed citric acid and Fructus schizandrae(五味子). 3. Compared with the control group (anemia- induced group without treatment), the mean number of Hemoglobin in the blood of mice was significantly larger only in evaluating the change of the sample group fed Fructus schizandrae(五味子). 4. Compared with the control group (anemia- induced group without treatment), the mean percentage of Hematocrit in blood of mice was significantly increased only in evaluating the change of sample group fed Fructus schizandrae(五味子) 500mg/kg and sample group fed Fructus schizandrae(五味子) 250mg/kg for 3days. 5. Compared with control group (anemia- induced group without treatment), the mean volume of Fe in serum of mice was significantly increased only in evaluating the change of sample group fed Fructus schizandrae(五味子) 500mg/kg. 6. Compared with control group (anemia- induced group without treatment), the mean TIBC in serum of mice was significantly increased only in evaluating the change of sample group fed Fructus schizandrae(五味子) 500mg/kg and sample group fed Fructus schizandrae(五味子) 250mg/kg for 7days. According to these results, a sour taste is presumed to have a general tonic effect on anemia, but more study must be taken on the effects of citric acid in improving female anemia.

• Restorative Dentistry and Endodontics
• /
• v.12 no.1
• /
• pp.119-129
• /
• 1986

The purpose of this study was to evaluate the marginal leakage of glass ionomer cement with different cavosurface margins. 192 class V cavities were prepared on freshly extracted non-carious teeth and glass ionomer cement were inserted according to the manufacturer's instructions. Cavity preparations for this investigation were performed in four groups. The experimental specimens were made by packing the glass ionomer cement (Fuji Ionomer Type II G-C Co. Japan) into the prepared 192 cavities of four groups with different modes: Group I. - The 48 cavities with $90^{\circ}$ butt-joint cavosurface preparation and restored with glass ionomer cement. Group II. - The 48 cavities with butt-joint preparation modified by $135^{\circ}$ beveling the cavosurface in the dentin and restored with glass ionomer cement. Group III. - The 48 cavities with butt-joint preparation modified by cutting a chamfer in the dentin and restored with glass ionomer cement. Group IV. - The same 48 cavities as group I, and overfilled with glass ionomer cement beyond the cavosurface angle. And four groups above described divided into three subgroups by means of conditioning the cavity walls: Control group. - Glass ionomer cement filled in the prepared 64 cavities after being cleaned with a stream of tap water. Phosphoric acid treatment group. - Glass ionomer cement filled in the prepared 64 cavities after being conditioned with a 50% phosphoric acid. Citric acid treatment group. - Glass ionomer cement filled in the prepared 64 cavities after being conditioned with a 50% citric acid. All 192 specimens were immersed in the 2.0% basic fuchsin solution and subjected to thermal stress at one-minute intervals ($4{\pm}2^{\circ}C$ to $60{\pm}2^{\circ}C$) for 70 minutes before exposure to the dye. The specimens were sectioned ecclesiologically through the center of the restorations for different periods of immersion time, 24 hours, 7 days, 14 days 30 days. The sections were examined under a stereoscopic microscope. The results were as follows: 1. The degree of marginal leakage in group II and III was greater than that in group I and IV. 2. The degree of marginal leakage in phosphoric acid treatment group was similar with that in control group. 3. The degree of marginal leakage in citric acid treatment group was less than that in control group. 4. In all groups, the degree of marginal leakage in phosphoric acid treatment group was greater than that in citric acid treatment group. 5. There is no statistical difference of the degree of marginal leakage according to the immersion time in the dye solution.