• Imaging Science in Dentistry
• /
• v.35 no.1
• /
• pp.9-14
• /
• 2005

Purpose : To observe the histopathological changes in the pulp tissues of mandibular molars in streptozotocin-induced diabetic rats after irradiation. Materials and Methods : The male Sprague-Dawley rats weighing approximately 250 gm were divided into four groups: control, diabetes, irradiation, and diabetes-irradiation groups. Diabetes mellitus was induced in the rats by injecting streptozotocin. Rats in control and irradiation groups were injected with citrate buffer only. After 5 days, the head and neck region of the rats in irradiation and diabetes-irradiation groups were irradiated with a single absorbed dose of 10 Gy. All the rats were sacrificed at 3, 7, 14, 21, and 28 days after irradiation. The specimen including the mandibular molars were sectioned and observed using a histopathological method. Results : In the diabetes group, capillary dilatation was observed. However, there was no obvious morphologic alteration of the odontoblasts. In the irradiation group, generalized necrosis of the dental pulp tissues was observed. Vacuolation of the odontoblasts and dilatation of the capillaries were noted in the early experimental phases. In the diabetes-irradiation group, generalized degeneration of the dental pulp tissues was observed. Vacuolation of the dental pulp cells and the odontoblasts was noted in the late experimental phases. Conclusion : This experiment suggests that dilatation of the capillaries in the dental pulp tissues is induced by diabetic state, and generalized degeneration of the dental pulp tissues is induced by irradiation of the diabetic group.

• Imaging Science in Dentistry
• /
• v.35 no.3
• /
• pp.133-139
• /
• 2005

Purpose To observe the histopathological changes in the periodontal tissues of mandibular molars in streptozotocin-induced diabetic rats after irradiation. Materials and Methods : The male Sprague-Dawley rats weighing approximately 250 gm were divided into four groups: control, diabetes, irradiation, and diabetes- irradiation groups. Diabetes mellitus was induced in the rats by injecting streptozotocin. Rats in the control and irradiation groups were injected with citrate buffer only After 5days, the head and neck region of the rats in irradiation and diabetes-irradiation groups were irradiated with a single absorbed dose of 10Gy. All the rats were sacrificed at 3, 7, 14, 21, and 28 days after irradiation. The specimen including the mandibular molars were sectioned and observed using a histopathological method. Results In the diabetes group, osteoclastic activity was observed in the alveolar bone and the root throughout the period of experiment. Also, osteoblastic and fibroblastic activities were markedly decreased. In the irradiation group, the osteoclasts were observed in the alveolar bone and the dilated capillaries were increased in the early experimental phases. However, vigorous osteoblastic activity was noted in the late experimental phases. In the diabetes-irradiation group, osteoblastic activity in the alveolar bone and the root was observed in the early experimental phases. However, there were no resorption and osteoblastic activity in the alveolar bone and the root in the late experimental phases, and obvious atrophic change of fibrous tissues was noted. Conclusion : This experiment suggests that osteoblastic activity was caused by irradiation in the late experimental phases, but atrophic change of the periodontal ligament tissues was induced after irradiation in diabetic state.

• Journal of Biomedical Engineering Research
• /
• v.37 no.5
• /
• pp.186-194
• /
• 2016

In this study, a co-axial flow induced microfluidic chip to fabricate pure collagen type I microfiber via the control of collagen type I and Na-alginate gelation process. The pure collagen type I microfiber was generated by selective degradation of Ca-alginate from 'Core-Shell' structured hydrogel microfiber. To make 'Core-Shell' structure, collagen type I solution was introduced into core channel and 1.5% Na-alginate solution was injected into side channel in microfluidic chip. To evaluatethe 'Core-Shell' structure, the red and green fluorescence substances were mixed into collagen type I and Na-alginate solution, respectively. The fluorescence substances were uniformly loaded into each fiber, and the different fluorescence images were dependent on their location. By immoblizing EpH4-Ras and C6 cells within collagen type I and Na-alginate solution, we sucessfully demonstrated the co-culture of EpH4-Ras and C6 cells with 'Core-Shell' like hydrogel microfiber for 5 days. Only to produce pure collagen type I hydrogel fiber, tri-sodium citrate solution was used to dissolve the shell-like Ca-alginate hydrogel fiber from 'Core-Shell' structured hydrogel microfiber, which is an excellent advantage when the fiber is employed in three-dimensional scaffold. This novel method could apply various application in tissue engineering and biomedical engineering.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.34.2-34.2
• /
• 2011

The demand for Ru has been increasing in the electronic, chemical and semiconductor industry. Chemical mechanical planarization (CMP) is one of the fabrication processes for electrode formation and barrier layer removal. The abrasive particles can be easily contaminated on the top surface during the CMP process. This can induce adverse effects on subsequent patterning and film deposition processes. In this study, a post Ru CMP cleaning solution was formulated by using sodium periodate as an etchant and citric acid to modify the zeta potential of alumina particles and Ru surfaces. Ru film (150 nm thickness) was deposited on tetraethylorthosilicate (TEOS) films by the atomic layer deposition method. Ru wafers were cut into $2.0{\times}2.0$ cm pieces for the surface analysis and used for estimating PRE. A laser zeta potential analyzer (LEZA-600, Otsuka Electronics Co., Japan) was used to obtain the zeta potentials of alumina particles and the Ru surface. A contact angle analyzer (Phoenix 300, SEO, Korea) was used to measure the contact angle of the Ru surface. The adhesion force between an alumina particle and Ru wafer surface was measured by an atomic force microscope (AFM, XE-100, Park Systems, Korea). In a solution with citric acid, the zeta potential of the alumina surface was changed to a negative value due to the adsorption of negative citrate ions. However, the hydrous Ru oxide, which has positive surface charge, could be formed on Ru surface in citric acid solution at pH 6 and 8. At pH 6 and 8, relatively low particle removal efficiency was observed in citric acid solution due to the attractive force between the Ru surface and particles. At pH 10, the lowest adhesion force and highest cleaning efficiency were measured due to the repulsive force between the contaminated alumina particle and the Ru surface. The highest PRE was achieved in citric acid solution with NaIO4 below 0.01 M at pH 10.

• Imaging Science in Dentistry
• /
• v.34 no.2
• /
• pp.81-89
• /
• 2004

Purpose: To investigate the histopathological changes in the temporomandibular joint in streptozotocin-induced diabetic rat following irradiation. Materials and Methods : Sprague-Dawley rats weighing about 250 gm were divided into three groups: control, diabetic, and diabetic-irradiated groups. Diabetes mellitus was induced in the rats by injecting streptozotocin. Rats in the control group were injected with citrate buffer only. After 5 days, the head and neck region of the rats in diabetic-irradiated group were irradiated with single absorbed dose of 10 Gy. The rats were killed at 1, 3, 7, 14, 21, and 28 days after irradiation. The specimen including the temporomandibular joint were sectioned and observed using a histopathological method. Results : In the diabetic group, severe bone resorption in the mandibular condyle was observed throughout the period of experiment. Necrosis of bone marrow and trabeculae was observed at 28 days after diabetic state. Atrophy and fibrosis in the retrodisca] tissue was gradually progressed during the time of the experiment. In the diabetic-irradiated group, severe bone resorption in the mandibular condyle was observed during the early experimental phases, but regeneration of bone marrow was initiated at ]4 days after diabetic state and irradiation. A]so, calcification of abnormal trabeculae was observed at 28 days after diabetic state and irradiation. The retrodisca] tissue was degenerated in the early experimental phases, but it had been gradually regenerated during the experimental time. Conclusion: This experiment suggests that bone resorption and degeneration in the mandibular condyle are caused by the induction of diabetes, and abnormal bone formation is induced after irradiation in diabetic state.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.1
• /
• pp.15-20
• /
• 2015

During the liquefaction of hydrogen, the ortho hydrogen is converted into the para form with heat release that evaporates the liquefied hydrogen into the gaseous one backwards. The ortho-para conversion catalysts are usually used during liquefaction to avoid such boil-off. In order to compare and analyze the performance of the ortho-para hydrogen conversion catalysts, in-situ FT-IR device was designed and manufactured to measure the para hydrogen conversion rate in real-time. $LaFeO_3$ and $La_{0.7}Sr_{0.3}Cu_{0.3}Fe_{0.7}O_3$ perovskite catalysts were prepared by the citrate sol-gel method and their spin conversion characteristics from ortho to para hydrogen were investigated by in-situ FTIR spectroscopy at 17K. It was found that the spin conversion was affected by surface area, particle size, and crystallite size of the catalysts. Thus, the $La_{0.7}Sr_{0.3}Cu_{0.3}Fe_{0.7}O_3$ perovskite catalyst that had higher surface area, higher crystallite size, and smaller particle size than $LaFeO_3$ showed the better spin conversion property of 32.3% at 17K in 120min interaction with the perovskite catalysts.

• Journal of Magnetics
• /
• v.20 no.3
• /
• pp.229-240
• /
• 2015

In this study, nanocrystalline ferrite powders with the composition $Ni_{0.5}Zn_{0.5}Fe_2O_4$ were prepared by the autocombustion method. The obtained powders were sintered at $800^{\circ}C$, $900^{\circ}C$ and $1,000^{\circ}C$ for 4 h in air atmosphere. The as-prepared and the sintered powders were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, and magnetization studies. An increase in the crystallite size and a slight decrease in the lattice constant with sintering temperature were observed, whereas microstrain was observed to be negative for all the samples. Two significant absorption bands in the wave number range of the $400cm^{-1}$ to $600cm^{-1}$ have been observed in the FT-IR spectra for all samples which is the distinctive feature of the spinel ferrites. The force constants were found to vary with sintering temperature, suggesting a cation redistribution and modification in the unit cell of the spinel. The M-H loops indicate smaller coercivity, which is the typical nature of the soft ferrites. The observed variation in the saturation magnetization and coercivity with sintering temperature has been attributed to the role of surface, inhomogeneous cation distribution, and increase in the crystallite size.

• Biomolecules & Therapeutics
• /
• v.18 no.1
• /
• pp.106-110
• /
• 2010

The pharmacokinetics and bioavailability of ambroxol, an expectoration improver and mucolytic agent, were studied to determine the feasibility of enhanced transdermal delivery of ambroxol from the ethylene-vinyl acetate (EVA) matrix system containing polyoxyethylene-2-oleyl ether as an enhancer in rats. The ambroxol-010 matrix system (15 mg/kg) was applied to abdominal skin of rats. Blood samples were collected via the femoral artery for 28 hrs and the plasma concentrations of ambroxol were determined by HPLC. Pharmacokinetic parameters were calculated using Lagran method computer program. The area under the curve (AUC) was significantly higher in the enhancer group ($1,678{\pm}1,413.3\;ng/ml{\cdot}hr$) than that in the control group $1,112{\pm}279\;ng/ml{\cdot}hr$), that is treated transdermally without enhancer, showing about 151% increased bioavailability (p<0.05). The average $C_{max}$ was increased in the enhancer group ($86.0{\pm}21.5\;ng$/ml) compared with the control group ($59.0{\pm}14.8\;ng$/ml). The absolute bioavailability was 13.9% in the transdermal control group, 21.1% in the transdermal enhancer group and 18.1% in the oral administration group compared with the IV group. The $T_{max}$, $K_a$, MRT and $t_{1/2}$ of ambroxol in transdermal enhancer group were increased significantly (p<0.01) compared to those of oral administration. As the ambroxol-EVA matrix containing polyoxyethylene-2-oleyl ether and tributyl citrate was administered to rats via the transdermal routes, the relative bioavailability increased about 1.51-fold compared to the control group, showing a relatively constant, sustained blood concentration. The results of this study show that ambroxol-EVA matrix could be developed as a transdermal delivery system providing sustained plasma concentration.

• Biomolecules & Therapeutics
• /
• v.16 no.4
• /
• pp.425-430
• /
• 2008

The objectives of this study were to prepare PLGA film onto the surface of the capsular tension ring (CTR) for controlled drug release and investigate the influence of plasticizers, the test drug and measurement conditions on flexibility of the film. Film solutions were prepared by dissolving PLGA, plasticizer (triethyl citrate, TEC or polyethylene glycol, PEG), test drug (dexamethasone) in ethyl acetate then films were prepared by spray coating and evaporation method. Then, the flexibility of PLGA film was determined by elongation test. The addition of plasticizer, PEG or TEC to PLGA copolymer caused a depression of glass transition temperature ($T_g$) and the elasticity of PLGA films increased. The addition of dexamethasone to the PLGA/TEC matrix decreased the flexibility of film. Dimensional factors of the PLGA films such as width and thickness were significantly influenced on flexibility of films and film length and elongation speed had no considerable influence on elongation of films. In this study, sufficiently flexible and stable PLGA films capable of being coated onto CTR could be prepared. This PLGA films can be used as a platform for local drug delivery.

• Applied Microscopy
• /
• v.22 no.2
• /
• pp.118-126
• /
• 1992

The pathway and time course of fucose-containing glycoprotein synthesis and intracellular translocation in osteoclasts of the mice maxillary alveolar bone were investigated by electron microscopic radioautography. Male Balb-C mice weighing 17gm were anesthetized with Nembutal and injected via the external jugular vein with 2.5 mCi of $L-[6-^{3}H]-fucose$ (specific activity 16.8 mCi/mmol) in 0.1 ml of sterile saline solution. At 5, 10, 20, 35 minutes and 8 hours after administration of the $^{3}H-fucose$, animals were killed by intracardiac perfusion of 30ml of 2% glutaraldehyde in a modified Tyroid solution, pH 7.4. The maxillae were then removed and further fixed in Karnovsky fixative for an additional 3-4 hours. After rinsing in 0.1M cacodylate buffer for 10 minutes, the maxillae were demineralized for 2 weeks at $4^{\circ}C$ in ethylene diamine tetra acetate containing 2% glutaraldehyde. The first interdental areas were mesiodistally sectioned into slices of 1mm thickness and postfixed in osmium tetroxide. Tissues were then dehydrated and embedded in Poly Bed. To prepare electron microscopic radioautography, the dipping method of Kopriwa (1973) was employed. Thin sections were coated with a crystalline monolayer of ILford $L_4$ photographic emulsion. After exposure for 4 months at $4^{\circ}C$, the sections were developed Kodak Microdol-X and Phenidon (for compact grains), fixed in 30% sodium thiosulfate, stained with uranyl acetate and lead citrate and examined in the electron microscope (JEOL 1200 EX). At 5, 10 and 20 minutes after injection, $^{3}H-fucose$ was concentrated in Golgi cisternae of the osteoblasts. By 35 minutes the labels were observed over small vesicles in the suprannclear area of osteoclasts. At 8 hours, numerous silver grains were located on the ruffled border and cell membrane of osteoclasts. These results indicate that fucose molecules are added in the Golgi apparatus and small vesicles appear to be responsible for translocation of the glycoproteins to the marginal portion of osteoblasts. The glycoproteins are distributed on the osteoclast cell surface and especially over the ruffled border.