• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.255-265
• /
• 2014

This study developed and proposed a pattern that can fit the body and compensate for the defects of the body type by applying shoulder princess line to the torso pattern and including formative characteristics of each object on the study of body shape's change in 40-59 year old middle aged women. The results of this study are as follows; First, according to the analysis of 'Size Korea 2010' such as average, standard deviation, minimum value, and maximum value of 48 items, women showed increase in most of the items except height as they became aged. Second, factor analysis was made to understand the shape component factors of middle aged women and to use them for the body type classification. Third, cluster analysis was made according to the shape of front and sides which should be considered in pattern production based on the factor analysis results, and the body type with the measurement values most similar to the average of direct measurement of 'Size Korea 2010' was set as standard. Fourth, in designing torso patterns through the $1^{st}$ and the $2^{nd}$ wearing experiments according to the body type, body shapes such as Chest Circumference, Waist Circumference, Hip Circumference, and Waist Back Length were considered in pattern design, goodness-of-fit was enhanced with difference in margin according to body type and different margins in front and back, and fitting satisfaction was improved by applying princess line.

• Journal of the Ergonomics Society of Korea
• /
• v.7 no.1
• /
• pp.21-30
• /
• 1988

The investigation of the surface areas, volumes and sizes (circumference, length, breadth) changes has been performed on women during menstruation, non-menstruation, pregnancy and post-pregnancy periods. (1) During menstruation and non-menstruation periods: The subjects were 30 healthy women from 19 to 24 years of age. The changes of lower leg areas were measured using the paper replacement method, showing an increase of 0.71% in surface during the menstruation period. The changes of lower 1g volumes were measured by the water replacement method, showing an increase of 1,74% in volume during the menstruation period. The correlation between the surface area changes and the volume changes was of r=0.45. The greatest change among the four parts of the leg was found at the ankle in both experiments. We measured also the foot length(1), the ball of foot girth(2), the foot breadth(3), the instep height (4), the instep girth(5), the ankle girth(6), the calf circumference(7) and we found the greatest changes in(4)=3,92% in(5)=0.79% and in (7) =0.84%. (2) During pregnancy and post-pregnancy periods: The subjects were 3 women, two pregnants(both from the 24th to the 36th week of pregnancy during the experiment) and one post-pregnant(from the second week to the eighth week during the expriment). For the first two subjects, we measured only the last 6 items of the preceding experiments(foot length(1),ball of foot girth(2), (3), (5), (6), (7)), Showing the greatest changes in the instep girth(5) and the calf circumference(7). In the case of the post-pregnant subject, these two items (5) and(7) decreased sharply during the second, third and fourth week and remain approximately the same afterwards.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.3
• /
• pp.311-323
• /
• 2012

This study establishes the initial data to develop a well-fitted underwear pattern by categorizing and analyzing torso types based on body measurements of women in their 50s and 60s. The results are as follows: First, the statistical assessment on the body measurements showed meaningful differences among age groups in twenty seven items (except for bust breadth, hip width armscye depth, hip depth, neck base circumference, armscye circumference, chest circumference, hip circumference, bishoulder length, shoulder length, front interscye, back interscye, weight and inclined angle of left shoulder). Women in their early 50s and late 60s (respectively) showed the highest values in height and depth. Second, there are five body factors according to the results of the factor analysis: Factor 1 (circumference, width, and depth of upper body measurements) - the degree of body depth and obesity, Factor 2 (height and vertical length) - The vertical torso length, Factor 3 - the size of shoulder, Factor 4 - the vertical upper body length, and Factor 5 - the size of shoulder angle. Third, the results of the cluster analysis showed that there are four distinctive body types. The largest number of the study subjects was related to Type 3 (30.69%), followed by Type 2 (26.78%), Type 1 (25.84%), and Type 4 (16.69%), respectively. For distribution of age groups by body type, Type 3 was the most common among the 60s group while Type 2 appeared most frequently among the 50s.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.184-195
• /
• 2017

Baseball is a life sport that gives vitality to people. However, currently available leg guards do not have a variety of sizes and it is very difficult to purchase a leg guard that is suitable for the size of a specific consumer. Therefore, this study investigated the size system of a leg guard sold in the market and suggested a grading deviation suitable for the legs of Korean males. The results of the study were as follows. First, most brands were sold only in three size systems as children's, teenagers, and adults. Adult size systems were not subdivided. Second, Korean male legs were classified into Group 1 (large girth and height and lower body muscle) and Group 2 (small girth and height and low underbody muscle). Third, the size system is based on vertical items such as height and mid-thigh circumference. Each group produced 10 sizes. The smallest height or the largest height was also found to be about 4.5 to 5.0cm smaller or larger than the sample size for each group. The total length of the leg guard was about 2.5cm when the height was increased or decreased by one size. It was confirmed that the deviation of the circumference of the mid-thigh should be about 2.0cm larger or smaller than the sample size even if the height is the same. The deviation of the knee circumference and ankle circumference was smaller than the other circumference. In conclusion, the dimension combinations of the leg guard must be set differently to provide a leg guard with high size suitability according to leg type.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.89-100
• /
• 2001

The major purpose of this study is to show exact and convenient devices and minimize error in body measurement. This study was referred to 13 records and compared 6 items that the investigator's opinion has been differed about anthropometric point and line and suggested convenient and radical device, and measured by if need be. The 30 students from 20 to 25 ages were measured and data was analyzed by mean, std. deviation and paired t-test. The results are as follows. 1. Side neck point has been suggested many devices, but was suggested in this study to decide by M. trapezius, cervicale point and fossa jugularis point. 2. Shoulder point was suggested to decide by point of 1/2 armhole depth, upper arm depth and shoulder depth except acromion point. 3. Waist circumference line has been differed between horizontal line and natural line. The result of measurements was no significant difference between two methods and natural line was convenience. Waist circumference line must considered two methods together for garment construction and somato type. 4. The standard of hip circumference line has been differed between buttock point and trochanterion point. The result of measurements was significant difference between two methods, but two point must considered together because of body type. 5. Chest circumference line at scye has been differed between horizontal line and natural line. The result of measurements was significant difference between two methods and natural line was convenience. Chest circumference line at scye must studied to decide method the line for garment construction.

• Journal of Fashion Business
• /
• v.20 no.5
• /
• pp.45-59
• /
• 2016

This research is a study to develop basic block patterns for adult males. The subjects were 20 men in their 20s, and we tested 6 basic bodice blocks that are used in academia and industry. First, a comparative analysis of the patterns of the bodice blocks was conducted and the test garments were made, and then their appearances were evaluated during wearing tests. Based on the test results, we intended to select a bodice block that is a good fit when it is put on and to use it as basic data in order to design a man's bodice block for the future. The research results are as follows: First, a comparison of the 6 bodice block drafts showed that they used differently calculated ease allowances at chest circumference and width, waist circumference, shoulder length, etc. for which the upper chest circumference is used as a reference. Second, when the appearances of the test garments were tested, the average scores were high in the order of B> H> P> K> M> L. Pattern B was superior in the areas of the neck circumference and shape, ease allowance at the back of the neck, circumference of the front of the neck, location of side width, ease allowance at sides, armhole width and depth. But in the other test items, there were cases where other patterns were superior.

• Journal of the Korean Society of Costume
• /
• v.35
• /
• pp.167-180
• /
• 1997

The purpose of this study was to find out some of the problems consumers have with ready to wear garments sizing and clothing satisfaction the following women's garments; sweaters T-shirts blouses jackets pants skirts one-piece jumpers and burberry(coats). For this study questionnaires were administered to female students in community college. Employing a sample of 166 students data were analyzed by Frequencies X2-test t-test ANOVA Factor Analysis and Regression. Major results of this study were summerized as follows: 1) Purchasing clothing subjects considered mainly bust circumference for T-shirts and blouse shoulder width for jackets and jumpers hip circumference for pants and skirts and length for sweaters(knit) one-piece and burberry(coats) as a reference of fitting sites. 2) In relation with dissatisfaction with apparel fit hip circumference of pants including jeans was found as the most unsatisfactory site. Besides subjects were dissatisfied with skirts sweaters one-piece jackets blouses burberry(coats) jumpers T-shirts in order. In relateion with height and body type were most dissatisfied with pants(jeans) 3) Factors related to clothing deprivation of ready-to-wear garment were identified as aethetics elements practical elements economic elements and fittness elements. Fittness elements were most dissatisfied factors with all items of garments except for skirts.

• Journal of Korean society of Dental Hygiene
• /
• v.20 no.5
• /
• pp.593-602
• /
• 2020

Objectives: This study aims to assess the relationship between the body mass index and waist circumference, which are indicators of obesity, and dental caries according to gender. Methods: Data were used from the 6th Korean National Health and Nutrition Examination Survey (2013-2015). Out of a total of 29,321 subjects, 13,222 persons aged 19 or older and who responded to the survey items of this study were selected as subjects to determine the relationship between obesity and dental caries. Results: In the body mass index, the obese group had a higher prevalence of dental caries in both males (1.25 times) and females (1.35 times) than the normal group. Even in the underweight group, males were 1.83 times more likely to have dental caries than the normal group. In the waist circumference, the obese group had a 1.48 times higher prevalence of dental caries than the normal group in women only. Conclusions: According to the results of this study, it was observed that obesity was related to dental caries, and it was thought that obesity management and oral care education programs for adults in Korea were necessary.

• Journal of the Korean Home Economics Association
• /
• v.38 no.10
• /
• pp.45-51
• /
• 2000

This study illucidated the importance of drop Value in the resets of surveying the current values of sizing and grading. Therefore, it is meaningful to get the classification of body form with the appropriate distribution of drop values of the body. The distribution of drop value and the frequency of each form is very helpful to name the combined sizing or coverage of ready-made clothes. This study aimed at classifying body forms with various drop values using multivariate analysis for sizing and grading. Factor analysis and cluster analysis were done using measured values from unmarried women. The resets are as follows; The factor which explains body forms was obtained by factor analysis, and the representative major 18 items which have important roles in classifying body forms were selected among the measured values with high factor loading and communality. 1) The body forms were classified into 3 groups based on the characteristics, frequencies and distributions of them obtained from cluster analysis. 2) Each classified body form showed conspicuous difference in drop value and the difference of body form mainly resulted from the difference between bust and hip(drop value) in Korean unmarried women. 3) Discriminant analysis showed that the most significant discriminant factor of the trunk classification were bust circumference, upper bust circumference, hip circumference and stature. 4) The cover ratio of size studied in this study for the Korean Sizing system for women's garment were founded high.

• Journal of Fashion Business
• /
• v.12 no.3
• /
• pp.136-152
• /
• 2008

The purpose of this study was to provide dress forms and jacket blocks for adult males based on the analysis of their somatotypes. As the result of the research conducted for this study that was based on 1290 males of 20 to 54 years-old, the shapes of adult male were 20 and each body shape was classified by size factor, height and chest girth. Also, master sizes were selected considering appearance frequency. XS type (master size: height 165cm and chest circumference 88cm), Yd type (master size: height 170cm and chest circumference 91cm), YI and AD2 types (master size: height 170cm and chest circumference 94cm) were selected to develop dress forms and their jacket blocks in this study. The procedure and results were follows; 1. The dress forms of XS, Yd, YI and AD2 types were produced base on means of 61 body measurements and cross sections of shoulder, chest, waist, hip of subjects belong to each somatotype. 2. New jacket blocks for XS, Yd, YI and AD2 types were developed based on the body surface developments through draping and the results of comparative investigation on the existing jacket blocks by wearing test. Also the drafting methods of new jacket blocks were provided. 3. The sensory evaluation by wearing test showed that the developed jacket blocks were estimated more highly in terms of chest's allowance, the front width's allowance, neck wrinkle, front allowance and overall appearance's fitness items than existing jacket blocks.