• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.87-90
• /
• 2000

In this paper. we present a method for a systematic design of a dielectric slab polarizer in the circular waveguide. This structure is realized using a tapered dielectric slab inside a circular waveguide. Commercial software is used to obtain the equivalent dielectric constant of the circular waveguide partially filled with a dielectric slab. The length of the tapered region is determined so that the reflection from the dielectric slab is sufficiently low. A polarizer operating at 10 GHz band is designed, fabricated and tested.

• 한국산업정보학회논문지
• /
• 제8권1호
• /
• pp.9-17
• /
• 2003

본 논문에서는 시간영역 유한차분법(FDTD)을 이용하여 서로 다른 두 원형 도파관의 정합을 위한 원형도파관 정합기를 해석하였다. 축대칭 구조이므로 3차원 문제를 2차원 문제로 변환한 2차원 FDTD 알고리즘을 사용하였고, 상대적으로 반경의 차이가 큰 불연속 도파관에 적용되는 두종류의 정합기를 제안하였다. 하나는 유전체가 부분적으로 채워진 정합기이고, 다른 하나는 테이퍼된 유전체봉이 삽입된 정합기이다. 제안된 정합기에서 정합기의 길이와 직경 및 유전체의 직경 등의 파라미터 변화에 따른 특성을 수치해석하여 비교하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.211-214
• /
• 2002

In this paper, we present a simple method for characterizing a rectangular waveguide to circular waveguide transition Three standard loads consisting of a short circuit, an offset short circuit 1, and an offset short circuit 2 are sequentially connected to the circular waveguide port and the reflection coefficient at port 1 Is measured for each case. From known reflection coefficients, of standard loads and measured reflection coefficients, the scattering matrix of the transition Is obtained. The proposed method Is verified by the numerical experiment using a commercial software HFSS and by measurments of a actual rectangular-to-circular waveguide transition.

• 반도체디스플레이기술학회지
• /
• 제8권3호
• /
• pp.7-11
• /
• 2009

In this paper, we developed and presented a design result for optimizing the geometry of Ag circular SPP waveguide for subwavelength waveguide applications. We investigated the effect of the design parameters on the light propagation and find the optimum design for small modal size, high coupling coefficient, and low sensitivity. The results show that the globally optimal design locates optimal waveguide geometries more efficiently than individual optimal points for multivalued objective function.

• ETRI Journal
• /
• 제28권5호
• /
• pp.656-659
• /
• 2006

This letter presents a new polarizer which has a simple comb structure inside a circular waveguide. The electrical performance of the proposed comb polarizer is optimized by a circular waveguide radius and by the physical parameters of the comb plates. This polarizer is suitable for providing good performance in millimeter-band application because of its simple structure and low fabrication cost. In our experiments the dual-band comb polarizer designed in band 1(K) and band 2(Ka) showed good electrical performance without any tuning elements.

• Journal of electromagnetic engineering and science
• /
• 제4권4호
• /
• pp.150-155
• /
• 2004

Universal design equations are presented for the H-plane T-junction power divider with a circular conducting post in a rectangular waveguide. For a given operating frequency and power split ratio, the post offset from the T-junction center line, the distance between the post and the waveguide wall, and the post diameter can be adjusted to obtain a minimum reflection at the input waveguide. Optimum values of the post offset are given in terms of the normalized frequency and the power split ratio. Corresponding values of the post diameter and the distance of the post from the waveguide wall are given in terms of the normalized frequency and the post offset.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.124-136
• /
• 2001

In this paper, we designed and manufactured the Ku-band circular waveguide antenna to do wireless communication with a ground radar as on-board antenna of missile. Using the MATLAB and the HFSS, we designed the circular polarizer which has a characteristic of circular polarization and broadband using the capacitive pin method, the feeder to feed coaxial line to circular waveguide, and a stopper to prevent a conductor material from being inserted. Then we simulated the designed antenna using the HFSS, obtained the gain and the radiation pattern. Because of a difficulty of manufacture, we established a manufacture process procedure. Antenna is manufactured with this procedure, test results of the manufactured antenna are the axial ratio of 1.37 ~ 1.72, the 3 ㏈ beamwidth of $72.23^{\circ}{\sim}78.54^{\circ},$ and the gain of 3.26 ~ 4.61 ㏈ within frequency band. We knew that these results are similar with simulation results. Also, we confirmed that the manufactured antenna is satisfied with requirement conditions through performance test, environmental test and flight test.

• 전자공학회논문지A
• /
• 제28A권10호
• /
• pp.799-805
• /
• 1991

In this paper, the analysis and design of a spirally slotted array antenna with high efficiency are presented. Electric fields in the slots are calculated by electromagnetic fields in the upper waveguide and radiation field equations are derived. Slots are arrayed spirally on the upper circular plate of twofold radial waveguide. In order to suppress grating lobes from the array, a slow wave structure is inserted in the upper waveguide. This antenna is characterized by a good circular polarization, high efficiency of 75 percent and grating lobes below -34dB.

• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1244-1250
• /
• 1997

An arbitrary shaped iris in rectangular waveguideis investigated using FEM-CDMA with triangularprism elements in this paper. The volume of irisis subdivided into a relatively small number of triangular prism elements and FEM is used to formulate the field distribution. On the other hand, the fields in the waveguide region are represented by BIM derived from the waveguide Green's function and boundary conditions. The proposed method is verified through the design and experiment for the circular iris filter using WR-90 waveguide.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.59-65
• /
• 2000

This paper describes the characteristics of a one dimensional narrow-wall slotted waveguide array with a single-layer linear-to-circular polarization converter consisting of a dipole array. An external boundary value Problem of one slot and three dipoles, which approximates the mutual coupling between the dipole array and an edge slot extending over three faces of a rectangular waveguide, is formulated and analyzed by the method of moments; design of polarization conversion is conducted for this model as a unit element. If every unit element has perfect circular polarization, grating lobes appear in the array pattern due to the alternating slot angle: these are suppressed in this paper by changing the dipole angle and degrading the axial ratio of the unit element. The validity of the design is confirmed by the measurements. The dipole array has negligible effects upon slot impedance; the polarization conversion for existing narrow-wall slotted arrays is realized by add-on dipole array.