• Journal of Broadcast Engineering
• /
• v.11 no.3 s.32
• /
• pp.326-335
• /
• 2006

Design criteria far a block code which guarantees minimized PAPR of the OFDM signals are proposed in this paper. Encoding procedure of the minimum PAPR codes (MPC) is composed of searching a seed codeword, circular shifting the register elements, and determining codeword inversion. It is shown that the PEP is invariant to the circular shift of register elements and codeword inversion. Based on such properties, systematic encoding rule for MPC is proposed. In addition proposed encoding rule can reduced greatly the size of look up table for MPC.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.133-138
• /
• 2003

In this paper, we analyzed a two-branch polarization diversity at a mobile station in NLOS environment when a base station transmits a circularly polarized wave. In order to calculate the correlation coefficient considering the XPD(cross polarization discrimination) between the received signals for the two diversity branches, a simple theoretical model of circular polarization diversity is adopted. From the analysis results, it can be seen that the XPD of circularly polarized wave is less than vertically polarized wave about 6~7 dB in measurement results. And also, it is clearly seen that the correlation coefficient of circular polarization diversity evaluated by the XPD is less than that of vertical polarization diversity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.9A
• /
• pp.664-672
• /
• 2009

In this paper, joint methods of cell searching and Direction-of-Arrival (DoA) estimation for a mobile relay station with a uniform circular array are proposed. The proposed joint estimation method for the mobile relay station is robust even when there exist symbol timing offsets between the signals received from adjacent base stations. Also, the proposed joint estimation method can reduce computational complexity and processing time, compared with the case where cell searching and DoA estimation are performed separately. Performances of the proposed method are evaluated by computer simulation under Mobile WiMAX environment.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.6
• /
• pp.2014-2022
• /
• 1996

Flow characteristics of the wake behind a finite circular cylinder(FC) mounted on a flat plate was experimentally investigated. Three finite cylinder models having aspect ratio (length to diameter ratio, L/D) of 6,10 and 13 were tested in this study. Wake velocity was measured by a hot-wire anemometry at Reynolds number of 20,000, and the results were compared with those of two-dimensional circular cylinder. As a result, the free-end effect on the wake structure becomes more dominant with decreasing the aspect ratio(L/D) of the finite cylinder. Invisid flow entrained into the wake region decreases the turbulence intensity and periodicity of the vortex shedding due to existence of the free end. From spectral analysis and cross correlation of the velocity signals, vortices having 24Hz frequency characteristics are found in the down wash flow just behind the free end. There exists very complicated flow near the free end due to interaction between the entrained flow and streamwise vortices. Vortex formation region is destroyed significantly in the near wake and shows quite different wake structures from those of 2-D cylinder.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.159-166
• /
• 2005

The pulse amplitude of a search radar signal received by an ES system is not constant pulse by pulse because of the radar's scan characteristics. The variation of the pulse amplitude causes the ES detection loss in the ES system. Therefore, the ES detection range equation should consider the ES detection loss caused by the search radar's scan characteristics. In this paper, we theoretically analyze the ES detection loss for the circular scar and propose the model to evaluate it quantitatively. The experiment results for the real search radar signals demonstrate that the proposed model is suitable for the evaluation model of the ES detection loss related to the circular scan of radars.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.6
• /
• pp.246-252
• /
• 2002

This paper describes the acoustic emission measurement method to diagnose GIS for particles. We measured and analyzed the signals of acoustic waves using acoustic two types sensors with 125KHz and 50KHz resonant frequency respectively when the particles were dropped on the surfaces of circular plates and inside of GlS tanks. We found that the difference between peak outputs of two sensors depended on the types and materials of particles and the conditions of dropping position. These results showed that the outputs of 125KHz sensor were higher than those of 50KHz sensor in circular plate and 362㎸ GIS tank made of steel and vice versa in circular plate and 800㎸ GIS tank made of aluminum. The ratios outputs of 125KHz sensor to those of 50KHz sensor were 1.4 - 2.37 in 800㎸ GIS tank and were 0.5 - 1.0 in 362㎸ GIS tank. Therefore we knew that adaption of two types acoustic sensors which had different resonant frequencies as a very useful method in diagnosis of GIS.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.126-137
• /
• 1993

This paper presents an efficient method for the identification of motion error sources in NC machine tools by making use of the circular interpolation test, which is often used in estimating the motion accuracy of NC machine tools. Mathematical formulae are described for motion errors due to various kinds of error sources. Two identification formulae are proposed: one is based on the frequency analysis and the other is formulated with the weithted residual method. Motion error signal is classified into two patterns, mean errors(mean of CW and CCW test signals from mean errors). The sources of the mean errors are identified by using the frequency analysis technique and the sources of the deviation errors by the weighted residual formulaltion. A menu driven, user oriented, computer program is written to realize the full steps of the proposed identificationprocedure. Then, the identification method is applied to two NC machine tools.

• Journal of the Korean earth science society
• /
• v.33 no.5
• /
• pp.395-400
• /
• 2012

One of the main problems concerning the shallow seismic survey is how to generate high frequency signals with large amplitudes using small seismic sources. If one could focus the seismic energy in the direction of the survey line, it will be much helpful in identifying the first break. In this research, we have used hammer as an impulsive source and compared the signal powers generated by different shapes of the hammer plates: circular, square, and rectangular. The experiment was conducted by calculating the power spectral density function to compare the frequency spectrum and signal power. In the direction perpendicular to the long side of the rectangular plate, the largest seismic energy with the highest frequency was achieved even with the same weights of hammer plates. Our conclusion is that it is more efficient to use a rectangular plate than a circular (or square) one when conducting a 2-D shallow seismic survey.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1347-1351
• /
• 2006

Microwave radiometry, as a non-invasive technique which doesn't pierce inside human and can measure the temperature, is to diagnose early the disease or abnormality by measuring the temperature inside human. In this paper, as an antenna for measuring human radiometric signals, we simulated and measured a dipole-type antenna with circular loops. As a measured result has a ultra wideband characteristic of $130%(0.8\sim3.8GHz)\;for\;511\leq-10dB$, it is considered to be suitable to detect the position and size of human tissue having various diseases.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.382-389
• /
• 2013

In anti-jamming GPS receiver, adaptive signal processing techniques in which the radiation pattern of adaptive array antenna of elements may be adaptively changed used to reject interference, clutter, and jamming signals. In this paper, I describes adaptive signal processing technique using the sample matrix inversion(SMI) algorithm. This adaptive signal processing technique can be applied effectively to wideband/narrowband anti-jamming GPS receiver because it does not consider the satellite signal directions and GPS signal power level exists below the thermal noise. I also analyzed the effects of covariance matrix sample size and diagonal loading technique on the system performance of five-element circular array antenna. To attain near optimum performance, more samples required for calculation covariance matrix. Diagonal loading technique reduces the system nulling capability against low-power jamming signals, but this technique improves robustness of adaptive array antenna.