• 대한기계학회논문집A
• /
• 제21권2호
• /
• pp.305-316
• /
• 1997

A more efficient method for obtaining the fatigue life enhancement of a structure member with fastener holes is described. It is based on the combined process of cold-expansion and ring-indentation. Residual stresses were induced onto premachined holes using ring-indentation process near the fastener hole combined with cold-expansion. And residual stresses at the vicinity of a hole were evaluated using a fracture mechanics approach. The compressive residual stresses were larger using the combined process than is in the case of simple cold-expansion. Fatigue testing of aluminum specimens showed that the fatigue crack growth retardation emanating from a circular hole was greater for the combined process than for a simple cold-expansion alone.

• 대한전자공학회논문지SP
• /
• 제38권3호
• /
• pp.269-281
• /
• 2001

본 논문에서는 단일 글꼴에 의존하는 원형 패턴 벡터(circular pattern vectors)를 이용하여 위치 이동, 크기 변화 그리고 회전에 무관한 새로운 인쇄체 한글 인식 알고리즘을 제안한다. 제안한 알고리즘은 2진 형태론(binary morphology)을 이용하여 입력 문자에 존재하는 잡음(noise)을 제거한 후, 원형 패턴벡터를 추출한다. 추출된 원형 패턴 벡터는 주어진 문자의 무게 중심을 원의 중심으로 하여 그린 여러 원주 상에 위치한 공간적인 분포 값을 나타내는 것이다. 마지막으로, 실험 문자는 기준 원형 패턴 벡터와 실험 원형 패턴 벡터간의 거리가 최소가 되는 기준 문자로 인식하게 된다. 제안한 알고리즘의 성능을 평가하기 위해, 크기 변화와 회전 변형이 있는 완성형 바탕체 한글 2,350자를 대상으로 모의 실험을 수행하였다. 제안한 알고리즘은 기존의 고리 투영 알고리즘보다 크기 변화와 회전 변형이 있는 한글 인식에 있어서 우수함을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권8호
• /
• pp.1485-1490
• /
• 2008

Dumbbell-shaped aromatic amphiphilic molecules consisting of a dodeca-p-phenylene as a rigid segment and oligoether dendrons as a flexible chains were synthesized, characterized, and their aggregation behavior was investigated in the bulk and at the air-water interface. In contrast to the molecule 2 which shows a nematic liquid crystalline state, molecule 1 based on shorter dendritic chains was observed to self-assemble into a 3-D primitive orthorhombic supercrystal. And molecule 1 at the air-water interface was observed to reorganize from circular plates to ring structures by lateral compressions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1466-1471
• /
• 2004

In this paper, we report the numerical and experimental solutions of the axi-symmetric flows in the axial plane driven by an impingement of fluid from the bottom wall of a circular cylinder. We managed to visualize successfully the flow pattern shown on the vertical plane through the container axis. The numerical results are not show to compare well with the experimental results for the case of the Rossby number 3. Because the numerical results calculate on the assumption that vortex flows are axi-symmetric flow on the other hand real experimental results are show asymmetric flow. The numerical solutions reveal that inertial oscillation plays an important role at small Rossby numbers, or at a larger background rotation.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.415-418
• /
• 2009

Concerned with ambiguous stereochemistry assignment of natural (+)-glabridin, absolute configurations of (${\pm}$)-glabridin enantiomers were studied with synthetic glabridin. Synthetic glabridin enantiomers were separated by semi-preparative Sumi-chiral column chromatography, and characterized by UV-Vis and NMR spectroscopy. Three-dimensional molecular structure of glabridin was obtained as equatorial Ph-3 half chair chroman ring from semi-empirical PM3 calculation, and refined by coupling constants in $^1H$ NMR spectrum. Finally, absolute configurations of two enantiomers were determined by circular dichroism spectroscopy based on the empirical helicity rules. Absolute configuration of natural (+)-glabridin was confirmed as (R)-glabridin, as known.

• ETRI Journal
• /
• 제33권5호
• /
• pp.802-805
• /
• 2011

This letter presents a K-band polarization reconfigurable antenna integrated with a silicon radio frequency MEMS switch into the form of a compact package. The proposed antenna can change its state from linear polarization (LP) to circular polarization (CP) by actuating the MEMS switch, which controls the configuration of the coupling ring slot. Low-loss quartz is used for a radiating patch substrate and at the same time for a packaging lid by stacking it onto the MEMS substrate, which can increase the system integrity. The fabricated antenna shows broadband impedance matching and exhibits high axial ratios better than 15 dB in the LP and small axial ratios in the CP, with a minimum value of 0.002 dB at 20.8 GHz in the K-band.

• Coupled systems mechanics
• /
• 제8권5호
• /
• pp.377-391
• /
• 2019

The present paper is focused on analyzing the delamination of inhomogeneous multilayered rods of circular cross-section loaded in torsion. The rods are made of concentric longitudinal layers of individual thickness and material properties. A delamination crack is located arbitrary between layers. Thus, the internal and external crack arms have circular and ring-shaped cross-sections, respectively. The layers exhibit continuous material inhomogeneity in radial direction. Besides, the material has non-linear elastic behavior. The delamination is analyzed in terms of the strain energy release rate. General solution to the strain energy release rate is derived by considering the energy balance. The solution is applied to analyze the delamination of cantilever rod. For verification, the strain energy release rate is derived also by considering the complementary strain energy.

• 한국전자파학회논문지
• /
• 제20권12호
• /
• pp.1325-1332
• /
• 2009

본 논문에서는 인체의 호흡 및 심박수 측정을 위해 2.4 GHz에서 동작하는 바이오 레이더 시스템의 소형화 및 성능 개선 방안으로서 하나의 원형 편파 안테나와 PLL 회로를 갖는 시스템을 설계하고 그 측정 결과를 제시 하였다. 제작된 바이오 레이더는 $90^{\circ}$ 하이브리드를 이용하여 원형 편파 특성과 송수신 격리 특성을 갖는 마이크 로스트립 안테나, 저잡음 증폭기, 전력 증폭기, 위상 고정 루프를 갖는 전압 제어 발진기, 직교 복조기 및 아날로그 회로로 구성된다. 특히, 단일 원형 편파 안테나를 소형화하기 위하여 annular-ring 형태의 마이크로스트립 안 테나를 송수신 회로와 적층함으로써, $40\times40mm^2$의 크기로 소형화할 수 있었다. 또한, 누설 송신 신호에 인한 수신부의 위상 잡음의 영향을 최소화하기 위하여 PLL 회로를 채용함으로써, 개선된 신호대 잡음비 성능을 갖도록 하였다. 설계된 바이오 레이더 시스템은 특별한 신호 처리 없이 50 cm 떨어진 사람의 호흡 및 심박수를 측정할 수 있음을 확인하였다.

• Computers and Concrete
• /
• 제20권1호
• /
• pp.39-47
• /
• 2017

In this paper, mode I fracture toughness of rock was determined by direct and indirect methods using Particle Flow Code simulation. Direct methods are compaction tension (CT) test and hollow centre cracked quadratic sample (HCCQS). Indirect methods are notched Brazilian disk (NBD) specimen, the semi-circular bend (SCB) specimen, hollow centre cracked disc (HCCD), the single edge-notched round bar in bending (SENRBB) specimen and edge notched disk (END). It was determined that which one of indirect fracture toughness values is close to direct one. For this purpose, initially calibration of PFC was undertaken with respect to data obtained from Brazilian laboratory tests to ensure the conformity of the simulated numerical models response. Furthermore, the simulated models in five introduced indirect tests were cross checked with the results from direct tests. By using numerical testing, the failure process was visually observed. Discrete element simulations demonstrated that the macro fractures in models are caused by microscopic tensile breakages on large numbers of bonded discs. Mode I fracture toughness of rock in direct test was less than other tests results. Fracture toughness resulted from semi-circular bend specimen test was close to direct test results. Therefore semi-circular bend specimen can be a proper test for determination of Mode I fracture toughness of rock in absence of direct test.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.245-252
• /
• 2018

본 논문에서는 CSRR구조의 대역제거특성을 이용하여 정지위성용 이중대역 원편파안테나를 설계하였다. 정지위성의 송신(1525~1559MHz)과 수신주파수(1626.5~1660.5MHz)사이에 대역저지 특성을 갖기위하여 사각 CSRR (Complementary split ring resonator)을 안테나의 그라운드면에 식각하였으며 패치안테나의 모서리 부분을 절삭하여 원편파 특성을 얻었다. 패치안테나의 공진주파수는 CSRR의 크기와 위치에 의해 달라지며 시뮬레이션과 측정을 통하여 원편파 특성을 확인하였다. 측정결과 송신과 수신 주파수대역에서 약 0.2dB와 1.5dB의 이득을 얻었다.