• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.2079-2087
• /
• 1993

The effects of subcooling and natural convection are studied numerically on the melting process of an initially subcooled phase-change medium filled inside a horizontal circular cylinder. It is postulated that melting continues with the tube wall kept at a constant temperature and with the unmelted solid core fixed. Primary emphasis is placed on the evolution of interface morphology, the local/overall heat transfer rate at the tube wall and at the interface, and the structure of natural convection. The numerical results are mainly presented in terms of the Rayleigh and subcooling numbers. As the degree of subcooling intensifies, the melting rate and the movement of the interface are impeded but the interfaces are of similar shape with the passage of time. The heat transfer characteristics are found to be mostly governed by the formation pattern of natural convection in the liquid phase. Good agreement with available experimental data is found.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.965-970
• /
• 2001

The object of this research is to evaluate the seismic performance of existing RC bridge piers that were constructed before the adoption of the seismic design provision of Korea Bridge Design Specification in 1992. In this research, adopted test parameters were limited ductile design or non-seismic design, aspect ratio, confinement steel type, loading pattern, lap-spliced ratio for longitudinal reinforcement. This study has been performed to verify the effect of test parameter by quasi-static test. Quasi-static test has been done to investigate the physical seismic performance of RC bridge piers, such as lateral force-displacement hysteretic curve, envelope curve etc. It has been observed that seismic performance of lap-spliced test specimen, non-seismically designed specimens, was significantly reduced.

• 콘크리트학회논문집
• /
• 제11권5호
• /
• pp.107-118
• /
• 1999

10 RC bridge piers have been made on a 1/3.4 scale model, and six piers of them were retrofitted with glassfiber. The have been tested in the quasi-static cyclic load so as to investigate their seismic enhancement before and after retrofitting with glassfibers. The objective of this experimental study is to investigate how to strength the ductility of reinforced concrete bridge piers which have been nonseismically designed and constructed in Korea before 1992. Important test parameters are axial load, load pattern, retrofit type. Glassfiber sheets were used for retrofitting in the plastic hinge region of concrete piers. The nonlinear behavior of bridge columns have been evaluated through their yield and ultimate strength, energy dissipation, displacement ductility and load-deflection characteristics under quasi-static cyclic loads. It can be concluded from the test that concrete piers strengthened with glassfibers have been enhanced for their ductile behavior by approximate 50%.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권1호
• /
• pp.12-21
• /
• 2016

In this paper, the $2^{nd}$ order hydrodynamic force effect of heaving submerged circular cylinder is considered, with the linear potential theory. Boundary value problem (BVP) is expanded up to the $2^{nd}$ order by using of the perturbation method and the $2^{nd}$ order velocity potential is calculated by means of integral equation technique using the classical Green's function expressed in cylindrical coordinates. The method of solving BVP is based on eigenfunction expansions. With different cylinder heights and heaving frequencies, graphical results are presented. As a result of the study, the cause of oscillatory force pattern is analyzed with the occurrence of negative added mass when a top of the cylinder gets closer to the free surface.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2001년도 추계학술대회 학술발표 논문집
• /
• pp.173-176
• /
• 2001

본 논문은 영상 해석 알고리즘의 하나인 원형 패턴 벡터 알고리즘을 이용하여 손가락으로 커서를 제어하는 시스템을 구현하였다. 이 알고리즘을 적용하기 위하여 영상에서 손 영역에만 해당하는 최대 원을 여러 개 그린 후 가장 큰 원의 중심점을 무게 중심점으로 사용하였으며, 무게 중심점에서 손의 외곽까지의 거리를 구하여 가리키는 손가락을 찾도록 하였다. 화면상의 커서의 수평 방향은 가리키는 손가락 방향을 이용하여 평면 좌표로 해석하여 제어하였고, 수직 방향은 모니터 중앙 상단에 한대의 카메라를 사용하였기 때문에 손가락 길이를 이용하여 불연속적으로 상-중-하의 세 영역으로 제어하였다. 수직 방향의 커서이동이 불연속적이기 때문에, 구축한 인터페이스 화면의 범위를 축소한 후 축소된 범위를 전체 화면으로 확대해 나감으로써 사용자가 원하는 목표지점으로 커서를 이동시킬 수 있다.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.382-389
• /
• 2013

In anti-jamming GPS receiver, adaptive signal processing techniques in which the radiation pattern of adaptive array antenna of elements may be adaptively changed used to reject interference, clutter, and jamming signals. In this paper, I describes adaptive signal processing technique using the sample matrix inversion(SMI) algorithm. This adaptive signal processing technique can be applied effectively to wideband/narrowband anti-jamming GPS receiver because it does not consider the satellite signal directions and GPS signal power level exists below the thermal noise. I also analyzed the effects of covariance matrix sample size and diagonal loading technique on the system performance of five-element circular array antenna. To attain near optimum performance, more samples required for calculation covariance matrix. Diagonal loading technique reduces the system nulling capability against low-power jamming signals, but this technique improves robustness of adaptive array antenna.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2006년도 추계학술발표대회 논문집
• /
• pp.179-182
• /
• 2006

This project is for a Branch clinic of DS Skin Clinic who currently runs two other skin clinics in Daejeon Province. The major consideration of the project is to provide the high quality space appropriate for the unique medical services compared to any other skin clinics. The concept of the design is 'spaciousness of the past' and actual design elements used in this space is 'Frame', 'Smooth Traffic Pattern', 'Eye Flow', 'Faded looking finishes and colors of material' Overall space is divided into 2 areas, which are Dermatology Department providing medical service and Skin Clinic Department providing skin and body care. Those 2 areas are connected to each other through a circular reception area for administration, storage, and public area.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1033-1038
• /
• 1995

NC 공작기계의 contour 운동 오차를 측정하기 위하여 사용되는 Ball-Bar에 의한 원호 보간 시험 데이터를 이용하여 NC controller의 성능을 평가 할 수 있는 S/W에 의한 방법을 제시한다. 본 논문에서 지금까지는 분석이 어려웠던 Masrer-Slave Changeover의 분석을 가능하게 하였으며, Ball-Bar로 부터 얻어지는 데이터를 Weighted Residual Method에 의한 종합적인 분석을 하였으며, 오차 원인별 비교를 위해 Eztra Sum of Squares Method를 도입하였다. 본 연구의 실제 적용을 위한 측정 및 분석 S/W를 개발하였으며, 결과적으로 NC controller의 성능평가에 유용함을 알 수 있었다. 무부하 조건에서의 Ball-Bar에 의한 분석 데이터와의 비교를 위하여 원형 시편을 가공하고, 진원도 측정 및 분석을 통하여 유사한 오차 pattern을 가짐을 알 수 있었다.

• 동의생리병리학회지
• /
• 제27권2호
• /
• pp.167-172
• /
• 2013

In order to establish the diagnostic indices of skin diseases, some physiological and pathological concepts of interstices(腠理) were researched based on , and western dermatology with etymological analysis. As physiological indices for diagnosis of skin diseases, measurement of epidermis and dermis using ultrasonogram in the zhongwan and dachui's location. And for grading looseness and fineness of interstices with 3 unsound groups, measuring numbers and sizes of sweat pores in each point's 1 cm diameter circular area using comparative method and palpation assessment. Another index is superficial temperature. As pathological indices for diagnosis, validating volumes of dead skin cells and grading degrees of atrophy and degeneration of skin lesion. And as supplementary measures, absorptive degrees of cosmetics on face should be recorded according to 3 grades. These diagnostic indices can contribute to establishment of standard pattern identification and prescription of skin diseases through converting anatomical cognizance into classical concepts of interstices objectively.

• 소성∙가공
• /
• 제10권6호
• /
• pp.465-470
• /
• 2001

Hole flanging experiments are performed on flat circular plates with a hole in the center and the flangeability and fracture behaviors of TRIP steels and ferrite-Bainite duplex steels were examined. In the hole flanging, deformation by lip and petalling occurs when plates are struck by punches of various shapes and high circumferential strains induced in the target material cause radial cracking and the subsequent rotation of the affected plate material in a number of symmetric petals. In all cases, failure of the plate was due to lip fracture that results from multiple localized neckings that take place around the hole periphery where straining is most severe and a somewhat regular pattern was observed in a fracture shape. The neck characteristics in flange formation and the transition from the lip to petal mode at which fracture occurs were compared with two materials.