• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.3
• /
• pp.386-398
• /
• 1998

The present experiment is conducted to investigate heat transfer characteristics on the impinging surface with secondary flows around circular nozzle jets. The changed vortex pattern around jet affects significantly the flow characteristics and heat transfer coefficients on the impinging surface. The effects of the jet vortex control are also considered with jet nozzle-to-plate distances and main jet velocities. The vortex pattern around a jet is changed from a convective instability to an absolute instability with a velocity suction ratio of the main jet and the secondary counterflow. With the absolute instability condition, the jet potential core length increases and the heat transfer on the impinging surface is increased by small scale eddies. The region of high heat transfer coefficients is enlarged with the high Reynolds number due to increasing secondary peak values. The effect of suction flows is influenced largely with collars attached the exit of the jet nozzle because the attached collar guides well the counterflow around the main jet.

• Journal of Fashion Business
• /
• v.5 no.1
• /
• pp.131-144
• /
• 2001

The purpose of this study is to examine the type of stitch and designs of knitwears using handcraft ornament techniques. This paper will also go on to develop and merchandize high value generated by design development. Knit is largely divided into weft knit stitch and warp knit stitch which are respectively woven by weft knitting machine and warp knitting machine. For clothing, circular knit and flat knit are frequently used while plain stitch, rib stitch and purl stitch are perceived as the basic stitches. Denbigh stitch, cord stitch, atlas stitch, which belong to tricot stitch, are the basic of warp knit stitch. There are also numerous fancy fabrics adapting the previously mentioned stitches and these are made into solid pattern and yarn dyed pattern. The handcraft ornament techniques in knitwears design are embroidery, beads, sequin, stone, printing, applique and fringe, etc. By applying these techniques thus creative expression, which cannot be expressed in other fashion items, is feasible. The women's knitwears are tries by mixed and various techniques, develope to high value knitwears, escaping from simple and practical items.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.1
• /
• pp.54-62
• /
• 2015

This paper describes the design and fabrication of an electronically rotated Tactical Air Navigation(TACAN) antenna using parasitic elements and PIN diode switches. We used parasitic elements arranged in a circular array and PIN diode switches to electronically rotate the antenna instead of employing a mechanically rotated antenna using motor. The antenna's physical characteristics and design features to generate the cardioid pattern and nine-lobe pattern including bearing information are described and simulated. The measured result shows a very good agreement with simulation and meets the specification of MIL-STD-291C.

• Macromolecular Research
• /
• v.14 no.5
• /
• pp.499-503
• /
• 2006

This report presents a new technical approach for evaluating the fiber orientation of composites using small-angle light scattering (SALS). Glass fiber (GF)/polypropylene (PP) composites with different fiber orientations were prepared by drawing compression-molded specimens. The drawn samples were remelted and then annealed at $150^{\circ}C$ in order to induce a crystalline structure on the fiber surface, and then underwent SALS analysis. The samples showed a combination of circular and streak patterns. The model calculations demonstrated that the number of nuclei on the fiber surface and the thickness of the transcrystalline layer affected the sharpness and intensity of the streak pattern. In addition, the azimuthal angle of the streak pattern was found to be dependent on the direction of the transcrystalline layer, which correlated with the fiber direction. This correlation suggests that the fiber orientation in the composites can be easily evaluated using SALS.

• Journal of electromagnetic engineering and science
• /
• v.17 no.1
• /
• pp.1-8
• /
• 2017

This paper introduces a technique to obtain the broadband characteristics of circularly polarized antennas using an L-shaped probe. A waveguide antenna is suitable for obtaining high gain and handling convenience in some applications; however, the asymmetrical structure of the L-shaped probe results in cross-polarization and frequency dependence on the field distribution of higher-order modes (HOM). In addition to the basic characteristics of a waveguide antenna with an L-shaped probe, the author discusses some techniques to reduce the HOM and cross-polarization. As a result, the 3-dB axial ratio (AR) is obtained with the fundamental mode even when the frequency is expanded to the region for HOM of TM. This reduction is mainly due to the cutoff structure to the TM mode around the short wall of the waveguide. Furthermore, some aperture modification techniques can reduce the cross-polarization in a wide range of angles in the radiation pattern. Such techniques and their mechanisms are discussed in this paper. The obtained performance shows that the proposed antennas have a wide range of angles of 3-dB AR in the radiation pattern, broadband characteristics in impedance and AR, and low variation in group velocity.

• Korean Journal of Plant Taxonomy
• /
• v.49 no.2
• /
• pp.101-106
• /
• 2019

A pollen morphological study was conducted using light and scanning electron microscopy involving six species belonging to the subtribe Neoguillauminiinae. Pollen samples from the six species are tricolporate, and the colpi are surrounded by broad margo, with the widest width in the equator, narrower toward the pole, and rounded at the end. Based on the pollen morphology, pollen of the species in the subtribe Neoguillauminiinae were divided into four types: the Neoguillauminia type (T1), the C. collinus type (T2), the C. casuarinoides type (T3) and the C. paucifolius type (T4). The generic divergence between Neoguillauminia and Calycopeplus was supported by the pollen characters of the size, amb and lumina shape. In particular, the traits of rounded shape in the outline of the polar view and circular lumina, which appear only in the pollen grains of N. cleopatra, support the recognition of Neoguillauminia as a monotypic genus. Calycopeplus oligandrus and C. paucifolius had the same reticulate pattern of pollen grains, supporting Forster's hypothesis that these two species are closely related. On the other hand, the close relationship between the morphologically similar C. collinus and C. casuarinoides was not supported by the pollen characters. Within the subtribe there are two equally parsimonious hypotheses regarding the evolution of exine characters. The first consists of two changes of microreticulate through parallel evolution from the primitive reticulate exine, and the second is that the microreticulate pattern is differentiated from the reticulate state and then reversed to reticulate pollen grains.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.161-170
• /
• 1994

This paper presents the performance and problems in analysis method and testing system of Electronic Speckle Pattern Interfermetry(ESPI) method, in measuring two-dimensional in- plane displacement. The analysis result of measurement by ESPI is quite comparable to that of measurement by strain gauge method. This implieds that the method of ESPI is a very effective tool in non-contact two-dimensional in-plane strain analysis. But there is a controversial point, measurement error. This error is discussed to be affected not by ESPI method itself, but by its analysis scheme of the interference fringe, where the first-order interpolation has been applied to the points of strain measured. Further development of advanced first-order interpolation method is being undertaken for the more precise in-plane strain measurement.

• Journal of Sensor Science and Technology
• /
• v.33 no.3
• /
• pp.173-178
• /
• 2024

Development of pressure sensors for harsh environments with high pressure, humidity, and temperature is essential for many applications in the aerospace, marine, and automobile industries. However, existing materials such as polymers, adhesives, and semiconductors are not suitable for these conditions and require materials that are less sensitive to the external environment. This study proposed a pressure sensor that could withstand harsh environments and had high durability and precision. The sensor comprised a piezoresistor pattern and an insulating film directly formed on a stainless-steel membrane. To achieve the highest sensitivity, a pattern design method was proposed that considered the stress distribution in a circular membrane using finite element analysis. The manufacturing process involved depositing and etching a dielectric insulating film and metal piezoresistive material, resulting in a device with high linearity and slight hysteresis in the range of a maximum of 40 atm. The simplicity and effectiveness of this sensor render it a promising candidate for various applications in extreme environments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.5
• /
• pp.491-503
• /
• 2014

In this paper, a $TM_{31}$ higher order mode half circular-ring microstrip antenna with monopole-like radiation characteristic for on-body communication is proposed. By using shorting vias, $TM_{31}$ resonance mode was excited, while achieving compact low-profile antenna with monopole-like radiation characteristics. To overcome the narrow bandwidth of a patch antenna, a C-shape half ring patch with shorting vias having $TM_{31}$ mode is closely located around a half circular patch. For size reduction, half mode is adopted. The proposed antenna has the overall dimensions of $0.25{\lambda}_0{\times}0.46{\lambda}_0{\times}0.025{\lambda}_0$ at the industrial, scientific, and medical(ISM) 2.45 GHz band(2.4~2.485 GHz) and the 10-dB return loss is 4.24 % ranging from 2.38 to 2.49 GHz. To verify body effect, two-thirds muscle equivalent semi solid phantom was fabricated and used to measure the antenna performance. A communication link is analysed to investigate the effect of human-body movements and antenna locations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.5 s.96
• /
• pp.501-510
• /
• 2005

In this paper, the miniaturized linear and circular polarization microstrip antennas are designed and fabricated at the resonant frequency of 1.575 GHz. To miniaturize the microstrip patch antenna(MPA), the 'L' type plates are attached under the rectangular microstrip patch. In case of the linear polarization, the size of the microstrip antenna attached the 14 plates is reduced to $67.9\%(47mm{\times}47mm)$ compared with general $MPA(83mm{\times}83mm)$. The return loss and -10 dB bandwidth are -34.4 dB and 49 $MHz(3.1\%)$. And the radiation pattern is broad through the size reduction of the patch. Also in case of the circular polarization, the size of the microstrip antenna with 13 plates is reduced to $54.6\%(53mm{\times}54mm)$ compared with the general $MPA(76mm{\times}83mm)$. The axial ratio is 1.37dB at 1.575 GHz, the 2 dB axial ratio bandwidth is 14 $MHz(0.8\%)$. As that result, we could confirm that 3-dimensional structure with attached 'L' shaped plate is proper form for the miniaturization of linear and circular polarization microstrip antenna.