• 한국강구조학회 논문집
• /
• 제28권4호
• /
• pp.213-222
• /
• 2016

극심한 대기부식 환경에 설치된 강구조물은 사용기간 증가에 따라 발생한 부식손상에 따라 구조성능의 변화나 감소가 발생할 수 있다. 본 연구는 부식손상 특징에 따른 강관부재의 압축강도 성능 변화를 평가하기 위하여 강관 시험체에 인위적인 부식손상을 도입한 후 압축강도 평가시험을 통하여 부식손상에 따른 압축강도 변화 및 거동변화를 평가하였다. 부식손상의 경우 단면에 대한 국부적인 부식손상의 형태 및 위치의 영향이 있는 것으로 평가되었으며, 국부부식 위치와 부식손상으로 인한 단면이 변화부 주위에서 국부 변형에 의한 파괴가 발생하는 것으로 분석되었다. 또한 본 연구결과를 통하여 부식의 분포 및 부식의 손상량에 따른 강관부재의 압축강도 변화관계를 부식손상량에 따라 평가할 수 있도록 제시하였다

• Wind and Structures
• /
• 제26권2호
• /
• pp.57-68
• /
• 2018

Wind tunnel tests are conducted to investigate wake-induced vibrations of two circular cylinders with a center-to-center spacing of 4 diameters and attack angle varying from $0^{\circ}$ to $20^{\circ}$ for Reynolds numbers between 18,000 and 168,800. Effects of structural damping, Reynolds number, attack angle and reduced velocity on dynamic responses are examined. Results show that wake-induced vortex vibrations of the downstream cylinder occur in a wider range of the reduced velocity and have higher amplitudes in comparison to the vortex-induced vibration of a single circular cylinder. Two types of wake-induced instability phenomena with distinct dynamic characteristics are observed, which may be due to different generation mechanisms. For small attack angles like $5^{\circ}$ and $10^{\circ}$, the instability of the downstream cylinder characterizes a one-degree-of-freedom (1-DOF) oscillation moving in the across-wind direction. For a large attack angle like $20^{\circ}$, the instability characterizes a two-degree-of-freedom (2-DOF) oscillation with elliptical trajectories. For an attack angle of $15^{\circ}$, the instability can transform from the 1-DOF pattern to the 2-DOF one with the increase of the Reynolds number. Furthermore, the two instabilities show different sensitivity to the structural damping. The 1-DOF instability can be either completely suppressed or reduced to an unsteady oscillation, while the 2-DOF one is relatively less sensitive to the damping level. Reynolds number has important effects on the wake-induced instabilities.

• 대한조선학회논문집
• /
• 제49권5호
• /
• pp.440-446
• /
• 2012

A twisted cylinder has been newly designed by rotating the elliptic cross section along the spanwise direction in order to reduce the drag and vorticies in wake region. The flow around the twisted cylinder at a subcritical Reynolds number (Re) of 3000 is investigated to analyze the effect of twisted spiral pattern on the drag reduction and vortex suppression using large eddy simulation (LES). The instantaneous wake structures of the twisted cylinder are compared with those of a circular and a wavy cylinder at the same Re. The shear layer of the twisted cylinder covering the recirculation region is more elongated than that of the circular and the wavy cylinder. Successively, vortex shedding of the twisted cylinder is considerably suppressed, compared with those of the circular and the wavy cylinder. Consequently, the mean drag coefficient and the fluctuating lift of the twisted cylinder are less than those of the circular and the wavy cylinder.

• Structural Engineering and Mechanics
• /
• 제81권1호
• /
• pp.81-91
• /
• 2022

The effects of interaction between concrete-gypsum interface and edge crack on the failure behavior of the specimens in senicircular bend (SCB) test were studied in the laboratory and also simulated numerically using the discrete element method. Some quarter circular specimens of gypsum and concrete with 5 cm radii and hieghts were separately prepared. Then the semicircular testing specimens were made by attaching one gypsum and one concrete sample to one another using a special glue and one edge crack is produced (in the interface) by do not using the glue in that part of the interface. The tensile strengths of concrete and gypsum samples were separately measured as 2.2 MPa and 1.3 MPa, respectively. during all testing performances a constant loading rate of 0.005 mm/s were stablished. The proposed testing method showed that the mechanism of failure and fracture in the brittle materials were mostly governed by the dimensions and number of discontinuities. The fracture toughnesses of the SCB samples were related to the fracture patterns during the failure processes of these specimens. The tensile behaviour of edge notch was related to the number of induced tensile cracks which were increased by decreasing the joint length. The fracture toughness of samples was constant by increasing the joint length. The failure process and fracture pattern in the notched semi-circular bending specimens were similar for both methods used in this study (i.e., the laboratory tests and the simulation procedure using the particle flow code (PFC2D)).

• 한국전자파학회논문지
• /
• 제17권9호
• /
• pp.900-912
• /
• 2006

본 논문에서는 1.575 GHz에서 운용되는 미사일 탄두 탑재형 GPS 수신 안테나를 원형 패치 안테나 구조로 미사일 탄두부의 중간에 장착하였으며, 원형 링 구조의 단락 핀을 이용하여 패치면과 접지면을 연결하였다. 제안된 안테나는 이중 급전과 이중 급전점의 위상 차이를 이용하여 미사일 비행 축과 수직한 방향(H-면)에서 무지향성의 방사 특성을 갖도록 설계되었다. 유전체로 1.6 mm 높이의 $FR4(\varepsilon_r=4.6)$를 사용하였으며 무지향성 방사패턴은 원형 패치 직경 59.5 mm, 단락 핀 직경 14 mm일 때 최적화되었다. 또한 실제 미사일 형태를 갖도록 직경 100 mm, 길이 500 mm의 원통형 몸체를 탄두 하단부에 장착하였다. 이때 이중 급전점의 사이각과 이중 급전점의 위상을 변화시키면서 H-면에서의 방사 패턴의 변화를 측정하였으며 그 결과, 이중 급전점의 사이각과 이중 급전점의 위상 차이가 각각 $100^{\circ}$일 때 이득 -5.55 dBd, 최대/최소 방사 전력 레벨 차 3.98 dB를 갖는 무지향성에 가까운 방사 패턴 특성을 얻을 수 있었다.

• 재활복지공학회논문지
• /
• 제11권4호
• /
• pp.371-376
• /
• 2017

본 논문에서는 원형 근전도 시스템 장비를 사용하여 근전도 패턴인식을 할 때, 장비의 센서 위치와 무관하게 패턴 인식이 가능한 알고리즘을 제안한다. 6가지 동작의 8채널 근전도 신호를 1초간 측정한 데이터를 이용하여 14개의 특징점을 추출하였다. 또한 8개의 채널에서 추출된 112개의 특징점을 나열하여 주성분분석을 하고 영향력이 높은 데이터만을 추려내어 8개의 입력 신호로 줄였다. 모든 실험은 k-NN 분류기를 이용하여 데이터를 학습시키고 5-fold 교차 검증을 사용하여 데이터를 검증하였다. 기계학습에서 데이터를 학습시킬 때, 어떤 데이터를 학습하느냐에 따라 그 결과가 크게 달라진다. 기존의 연구들에서 사용하는 학습 데이터를 사용 할 경우 99.3%의 정확도를 확인하였다. 그러나 센서의 위치가 22.5도 정도만 틀어지더라도 67.28%의 정확도로 명확하게 떨어짐을 보았다. 본 논문에서 제안하는 학습 방법을 사용 할 경우 98%의 정확도를 보이고 장비의 센서의 위치가 바뀌더라도 98% 근처의 정확도를 유지함을 보였다. 이러한 결과를 사용하여 원형 근전도 시스템을 사용하는 사용자들의 편의성을 크게 증대시켜 줄 수 있을 것으로 보인다.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.449-455
• /
• 2011

Electric drive vehicles (EDV) have received much attention recently because of their environmental and energy benefits. In an EDV, the motor drive system directly influences the performance of the propulsion system. However, the available DC voltage is limited, which limits the maximum speed of the motors. At high speeds, the inverter voltage increases if the square wave (SW) voltage (six-step operation) is used. Although conventional direct torque control (DTC) has several advantages, it cannot work in the six-step mode required in high-speed applications. In this paper, a single-mode seamless DTC for AC motors is proposed. In this scheme, the trajectory of the reference flux changes continuously between circular and hexagonal paths. Therefore, the armature voltage changes smoothly from a high-frequency switching pattern to a square wave pattern without torque discontinuity. In addition, because multi-mode controllers are not used, implementation is more straightforward. Simulation results show the voltage pattern changes smoothly when the motor speed changes, and consequently, torque control without torque discontinuity is possible in the field weakening area even with a six-step voltage pattern.

• 복식
• /
• 제60권10호
• /
• pp.80-87
• /
• 2010

The purpose of this study is to develop cultural products containing Korean beauty with modern sense by applying quilting with dyed threat among Korean traditional quilting works. Quilting with dyed thread using various colored thread expresses curve, straight and oblique lines harmoniously, is mainly used to make household goods such as a pouch, a spectacle case and a quilting pocket and a circular pattern, a cross pattern and a geometric pattern are shown in this kind of quilting. As for sewing method, half backstitch and full backstitch are used, and products made by this method are pouches stuffing pads in cotton or silk and quilting it finely to make patterns with various colored threads of stuffing cotton between linings and spectacle cases, a packet of needles and case of spoon and chopsticks which give various feelings according to arrangement of colors. Design of cultural products by applying the beauty of curves of hanbok, sleave-seam of jeogori, trimming line of dangeui. We expect that various cultural products with Korean traditional beauty and modern convenience will be developed continually by introducing the artistic strength of quilting with dyed thread to practical life.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.226-229
• /
• 1989

This paper presents a navigation control method for a vision guided robot. The robot is equipped with one camera, an IBM/AT compatible PC, and a sonar system. The robot can either follow track specified on a monitor screen or navigate to a destination avoiding any obstacles on its way. The robot finds its current position as well as its moving direction by taking an image of a circular pattern placed on the ceiling.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.20-21
• /
• 2003

Electronic speckle pattern interferometry has many applications in science and engineering. Among these, vibration measurement is the area where ESPI has many advantages over other techniques. We developed a stroboscopic ESPI system to measure the harmonic vibration of a piece of copper tape attached to a circular hole structure. Figure 1 shows the schematic diagram of the stroboscopic ESPI system. (omitted)