• 한국강구조학회 논문집
• /
• 제24권1호
• /
• pp.35-46
• /
• 2012

초고층 빌딩의 수요가 증가함에 따라 고강도 강관의 수요 또한 함께 증가하고 있다. 이에 고강도 고인성의 600MPa급 강관의 접합부 내력 연구가 필요하게 되었다. 또한 현행국내기준에는 강관의 경우 항복응력 360MPa 이하에 설계식을 적용하도록 되어 있다. 즉, 고강도강재를 이용한 600MPa 강관의 경우 현행기준을 적용할 수 없으므로 600MPa급 고강도 강관의 거셋플레이트 접합부의 내력실험 및 유한요소해석을 통하여 기존 설계식의 적용가능성을 조사하고 접합부의 거동을 연구하고자 한다. 특히, 본 논문에서는 원형강관에 길이 방향으로 거셋플레이트가 접합된 접합부에 횡력(수평력)이 작용하였을 때의 거동을 다루었다. 유한요소해석 및 실험결과를 설계식과 비교해보면, 고강도 강재에서는 기존의 설계식들이 56~79%로 과소평가되었다.

• Steel and Composite Structures
• /
• 제5권1호
• /
• pp.49-70
• /
• 2005

This paper reports on finite element analysis techniques that may be applied to the study of circular hollow structural sections and related bearing connection geometries. Specifically, a connection detail involving curved steel saddle bearings and a Structural Tee (ST) connected directly to a large-diameter Hollow Structural Section (HSS) truss chord, near its open end, is considered. The modeling is carried out using experimentally verified techniques. It is determined that the primary mechanism of failure involves a flexural collapse of the HSS chord through plastification of the chord wall into a well-defined yield line mechanism; a limit state for which a shell-based finite element model is well-suited to capture. It is also found that classical metal plasticity material models may be somewhat limited in their applicability to steels in fabricated tubular members.

• Earthquakes and Structures
• /
• 제12권2호
• /
• pp.201-211
• /
• 2017

This paper experimentally investigates the effect of yield strength of reinforcing bars and stirrups on the seismic performance of reinforced concrete (RC) circular piers. Reversed cyclic loading tests of nine-large scale specimens with longitudinal and transverse reinforcement of different yield strengths (varying between HRB335, HRB500E and HRB600 rebars) were conducted. The test parameters include the yield strength and amount of longitudinal and transverse reinforcement. The results indicate that the adoption of high-strength steel (HSS) reinforcement HRB500E and HRB600 (to replace HRB335) as longitudinal bars without reducing the steel area (i.e., equal volume replacement) is found to increase the moment resistance (as expected) and the total deformation capacity while reducing the residual displacement, ductility and energy dissipation capacity to some extent. Higher strength stirrups enhance the ductility and energy dissipation capacity of RC bridge piers. While the product of steel yield strength and reinforcement ratio ($f_y{\rho}_s$) is kept constant (i.e., equal strength replacement), the piers with higher yield strength longitudinal bars are found to achieve as good seismic performance as when lower strength bars are used. When higher yield strength transverse reinforcement is to be used to maintain equal strength, reducing bar diameter is found to be a better approach than increasing the tie spacing.

• 한국강구조학회 논문집
• /
• 제24권2호
• /
• pp.163-173
• /
• 2012

원형강관의 접합부는 다양한 상세를 가지고 있으며 접합부가 항복에 이를 경우 복잡한 국부변형을 유발한다. 이러한 접합부의 국부변형을 고려한 단순화된 설계식의 제안은 매우 어려운 문제이다. 원형강관접합부 설계를 위한 현행 한국구조기준(KBC 2009)에서는 AISC의 설계식과 매우 유사한 단순화된 설계식을 제시하고 있다. 현행 설계식은 원형강관 부재의 재질에 대하여 항복강도는 최대 360MPa 항복비는 0.8로 각각 제한하고 있어서 구조기준에서 제한하는 최대항복강도 이상의 강재를 사용할 경우에는 유사 상세접합부를 대상으로 구조실험이나 합리적인 해석 등을 통하여 안전성을 검증한 후 사용하도록 하고 있다. 본 논문에서는 고강도강재(HSB600)와 일반구조용강재 (SS400)를 이용한 원형강관-직각방향 거셋플레이트 접합부에 횡력(수평력)이 작용하는 실험과 정밀모델 유한요소해석을 실시하였다. 유한요소해석 및 실험결과를 현행 설계식과 비교분석하여 향후 접합부 설계식의 개정에 기초적 자료로 사용될 수 있을 것이다.

• Structural Engineering and Mechanics
• /
• 제7권2호
• /
• pp.127-145
• /
• 1999

This paper deals with the development of an approach for evaluating the squash load and rigidity of unprotected concrete filled steel columns at elevated temperatures. The current approach of evaluating these properties is reviewed. It is shown that with a non-uniform temperature distribution, over the composite cross-section, the calculations for the squash load and rigidity are tedious in the current method. A simplified approach is proposed to evaluate the temperature distribution, squash load, and rigidity of composite columns. This approach is based on the model in Eurocode 4 and can conveniently be used to calculate the resistance to axial compression of a concrete filled steel column for any fire resistance time. The accuracy of the proposed approach is assessed by comparing the predicted strengths against the results of fire tests on concrete filled circular and square steel columns. The applicability of the proposed approach to a design situation is illustrated through a numerical example.

• Steel and Composite Structures
• /
• 제6권2호
• /
• pp.103-122
• /
• 2006

The capacity of tubular truss chords subjected to concentrated reaction forces in the vicinity of the open end (i.e., the bearing region) is not directly treated by existing design specifications; although capacity equations are promulgated for related tubular joint configurations. The lack of direct treatment of bearing capacity in existing design specifications seems to represent an unsatisfactory situation given the fact that connections very often control the design of long-span tubular structures comprised of members with slender cross-sections. The case of the simple-span overhead highway sign truss is studied, in which the bearing reaction is applied near the chord end. The present research is aimed at assessing the validity of adapting existing specifications' capacity equations from related cases so as to be applicable in determining design capacity in tubular truss bearing regions. These modified capacity equations are subsequently used in comparisons with full-scale experimental results obtained from testing carried out at the University of Pittsburgh.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.52-60
• /
• 1999

In this study the effect of roundness error with respect to the cutting conditions using the external cylindrical work piece by end mill cutting in a machining center was studied. the end mill used in this study is HSS coated with Ti-N which is of Ø 12-4 flutes. The material of workpiece is SM20C and cutting oil is used as a cooling flued The cutting experiments were carried out for the several cutting conditions(depth of cut height of end mill feed rate revolution per minute and cutting direction) and their roundness effects were compared using the least squares circle measuring method. The experimental results are summarized as follows : 1) The cutting depth is dominant for the roundness of a cylindrical work piece and the cutting speed must be determined precisely when the cutting depth is large 2) When the cutting direction in circular manufacturing is the same with the spindle rotation i.e up-cutting condition the surface roundness is also improved.

• Steel and Composite Structures
• /
• 제6권3호
• /
• pp.257-284
• /
• 2006

The behaviour of hollow structural steel (HSS) stub columns and beams filled with normal concrete and recycled aggregate concrete (RAC) under instantaneous loading was investigated experimentally. A total of 40 specimens, including 30 stub columns and 10 beams, were tested. The main parameters varied in the tests were: (1) recycled coarse aggregate (RCA) replacement ratio, from 0 to 50%, (2) sectional type, circular and square. The main objectives of these tests were threefold: first, to describe a series of tests on new composite columns; second, to analyze the influence of RCA replacement ratio on the compressive and flexural behaviour of recycled aggregate concrete filled steel tubes (RACFST), and finally, to compare the accuracy of the predicted ultimate strength, bending moment capacity and flexural stiffness of the composite specimens by using the recommendations of ACI318-99 (1999), AIJ (1997), AISC-LRFD (1999), BS5400 (1979), DBJ13-51-2003 (2003) and EC4 (1994).

• 한국강구조학회 논문집
• /
• 제22권2호
• /
• pp.109-119
• /
• 2010

600MPa급 고강도 강관은 항복강도와 항복비에 대한 제한이 따른다. 현재 여러 기준에는 항복강도 360MPa 이하, 항복비 80% 이하를 사용하도록 권장하고 있다. 한계상태에서 고강도 강재의 압축세장비가 저강도 강재보다 작아져 압축지관의 좌굴발생이 야기되기 때문에 압축좌굴에 대한 거동을 이해하는 것은 필수적이다. 또한 각형강관에 대한 많은 실험데이터는 있지만 고강도 원형강관에 대한 실험은 많지 않다. 그래서 이 논문의 주된 목적은 실험에 앞서 원형강관을 유한요소 해석을 통하여 압축 좌굴과 고강도 강재의 접합부 한계상태식에 대한 검증을 통하여 600MPa와 400MPa 강재의 사용성을 알고자 하는 것이다. 이 해석은 구조물의 거동을 이해하기 위하여 폭두께비, 지관각도, 항복비, 편심을 주된 변수로 하여 범용프로그램인 아바쿠스를 사용하여 해석을 수행하였다. 그 결과 같은 하중에서 고강도 강재의 압축지관은 탄성좌굴이 발생하고 저강도 강재는 비탄성좌굴이 발생하는 것을 확인하였고 항복비가 80%이상인 경우 접합부가 취성파괴 되었다. 그리고 고강도 강재에서 주강관의 폭두께비를 변화시켰을 때 주관과 지관의 상대적인 폭두께비로 인해 해석값이 기준값보다 감소함을 알 수 있었다. 그러나 그 외 변수들로 인한 해석상 고강도 강재의 접합부 하중의 변화는 없는 것으로 확인하였다.