• 한국응용과학기술학회지
• /
• 제37권6호
• /
• pp.1646-1658
• /
• 2020

이 연구의 목적은 운동 후 수중회복방법의 차이가 성장호르몬, 테스토스테론, 혈중젖산농도, 심부담도, 통증의 변화를 알아보는 것이다. 저항운동 경력 6개월 이상인 남자 7명을 대상으로 집중 웨이트 트레이닝과 서킷 웨이트트레이닝을 1RM의 60%강도로 실시한 다음 회복방법으로 수중걷기회복과 수중앉기 회복을 진행하였다. 성장호르몬은 모든 운동형태와 회복방법에서 운동 후, 회복 후, 안정 시 순으로 높게 나타났으며, 테스토스테론은 운동 후, 회복 후, 안정 시 순으로 높았다. 혈중젖산농도는 모든 운동형태와 회복방법에서 운동 후, 회복 후, 안정 시 순으로 높았으며 집중저항운동 후 동적회복이 정적회복보다 낮았다. 심부담도는 모든 운동형태와 회복방법에서 운동 후, 회복 후, 안정 시 순으로 높았다. 근통증은 모든 운동형태와 회복방법에서 운동직후, 회복 후, 24시간, 48시간, 72시간 순으로 감소하였다. 물속 환경에서도 동적회복이 정적회복보다 근피로 개선에 효과가 있는 것으로 사료된다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.89.1-89.1
• /
• 2010

Since Gratzel and co-workers developed a new type of solar cell based on the nanocrystalline $TiO_2$ electrode, dye-sensitized solar cells (DSSCs) have attracted considerable attention on account of their high solar energy-to-conversion efficiencies (11%), their easy manufacturing process with low cost production compared to conventional p-n junction solar cells. The mechanism of DSSC is based on the injection of electrons from the photoexcited dye into the conduction band of nanocrystalline $TiO_2$. The oxidized dye is reduced by the hole injection process from either the hole counter or electrolyte. Thus, the electronic structures, such as HOMO, LUMO, and HOMO-LUMO gap, of dye molecule in DSSC are deeply related to the electron transfer by photoexcitation and redox potential. To date, high performance and good stability of DSSC based on Ru-dyes as a photosensitizer had been widely addressed in the literatures. DSSC with Ru-bipyridyl complexes (N3 and N719), and the black ruthenium dye have achieved power conversion efficiencies up to 11.2% and 10.4%, respectively. However, the Ru-dyes are facing the problem of manufacturing costs and environmental issues. In order to obtain even cheaper photosensitizers for DSSC, metal-free organic photosensitizers are strongly desired. Metal-free organic dyes offer superior molar extinction coefficients, low cost, and a diversity of molecular structures, compared to conventional Ru-dyes. Recently, novel photosensitizers such as coumarin, merocyanine, cyanine, indoline, hemicyanine, triphenylamine, dialkylaniline, bis(dimethylfluorenyl)-aminophenyl, phenothiazine, tetrahydroquinoline, and carbazole based dyes have achieved solar-to-electrical power conversion efficiencies up to 5-9%. On the other hand, organic dye molecules have large ${\pi}$-conjugated planner structures which would bring out strong molecular stacking in their solid-state and poor solubility in their media. It was well known that the molecular stacking of organic dyes could reduce the electron transfer pathway in opto-electronic devices, significantly. In this paper, we have studied on synthesis and characterization of dendritic organic dyes with different number of electron acceptor/anchoring moieties in the end of dendrimer. The photovoltaic performances and the incident photon-to-current (IPCE) of these dyes were measured to evaluate the effects of the dendritic strucuture on the open-circuit voltage and the short-circuit current.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.117.2-117.2
• /
• 2011

Since Gratzel and co-workers developed a new type of solar cell based on the nanocrystalline TiO2 electrode, dye-sensitized solar cells (DSSCs) have attracted considerable attention on account of their high solar energy-to-conversion efficiencies (11%), their easy manufacturing process with low cost production compared to conventional p-n junction solar cells. The mechanism of DSSC is based on the injection of electrons from the photoexcited dye into the conduction band of nanocrystalline TiO2. The oxidized dye is reduced by the hole injection process from either the hole counter or electrolyte. Thus, the electronic structures, such as HOMO, LUMO, and HOMO-LUMO gap, of dye molecule in DSSC are deeply related to the electron transfer by photoexcitation and redox potential. To date, high performance and good stability of DSSC based on Ru-dyes as a photosensitizer had been widely addressed in the literatures. DSSC with Ru-bipyridyl complexes (N3 and N719), and the black ruthenium dye have achieved power conversion efficiencies up to 11.2% and 10.4%, respectively. However, the Ru-dyes are facing the problem of manufacturing costs and environmental issues. In order to obtain even cheaper photosensitizers for DSSC, metal-free organic photosensitizers are strongly desired. Metal-free organic dyes offer superior molar extinction coefficients, low cost, and a diversity of molecular structures, compared to conventional Ru-dyes. Recently, novel photosensitizers such as coumarin, merocyanine, cyanine, indoline, hemicyanine, triphenylamine, dialkylaniline, bis(dimethylfluorenyl)-aminophenyl, phenothiazine, tetrahydroquinoline, and carbazole based dyes have achieved solar-to-electrical power conversion efficiencies up to 5-9%. On the other hand, organic dye molecules have large ${\pi}$-conjugated planner structures which would bring out strong molecular stacking in their solid-state and poor solubility in their media. It was well known that the molecular stacking of organic dyes could reduce the electron transfer pathway in opto-electronic devices, significantly. In this paper, we have studied on synthesis and characterization of dendritic organic dyes with different number of electron acceptor/anchoring moieties in the end of dendrimer. The photovoltaic performances and the incident photon-to-current (IPCE) of these dyes were measured to evaluate the effects of the dendritic strucuture on the open-circuit voltage and the short-circuit current.

• 한국산학기술학회논문지
• /
• 제15권6호
• /
• pp.4013-4018
• /
• 2014

염료감응형 태양전지 상대전극부에 Au/Pt 이중 촉매층 적용에 따른 전해질과의 반응안정성 확인과 에너지변환효율 변화를 확인하기 위해 $0.45cm^2$ 면적을 가진 glass/FTO/blocking layer/$TiO_2$/dye/electrolyte/50nm Pt/50nm Au/glass 구조의 소자를 준비하였다. 비교를 위해 평탄한 유리기판 위에 증착된 100nm 두께의 Pt 상대전극을 채용한 소자도 동일한 방법으로 확인하였다. 솔라 시뮬레이터와 퍼텐쇼 스탯을 통해 단락전류밀도, 개방전압, 필팩터, 에너지변환효율의 광전기적 특성을 확인하였다. Au/Pt 이중층과 전해질의 반응을 확인하기 위해 광학현미경을 통해 전해질 주입 후 0~25분 후 이중층의 미세구조를 확인하였다. 광전기적 특성 분석 결과, 평탄한 유리기판 위의 단일층 Pt의 에너지변환효율은 4.60%를 나타내고 시간 의존성이 없었다. 반면, Au/Pt의 경우 전해질 주입 직 후, 5분 후, 25분 후의 에너지 변환 효율이 각각 5.28%, 3.64%, 2.09%로 시간이 지남에 따라 감소하였다. 광학현미경 분석을 통하여, 전해질 주입 직 후, 5분 후, 25분 후의 부식면적이 각각 0, 21.92, 34.06%로 Au와 전해질이 반응하여 부식되는 것을 확인하였고, 이를 통해 Au/Pt가 전기적으로 시간이 지남에 따라 촉매활성도와 효율이 감소하는 것을 확인하였다. 따라서 염료감응태양전지에 Au/Pt 촉매는 단기적으로는 기존 Pt only보다 우수하였으나 장기적으로는 전해질과의 안정성이 미흡함을 확인하였다.

• 전자공학회논문지D
• /
• 제36D권1호
• /
• pp.38-46
• /
• 1999

본 논문에서는 0.25${\mu}m$ T형 게이트 P-HEMT의 제작 및 특성 평가를 하였고, 제작된 P-HEMT를 X-밴드용 3단 MMIC 저잡음 증폭기 설계에 응용하였다.제작된 P-HEMT의 DC 특성은 최대 외인정 전달 컨덕턴스가 400mS/mm이고, 최대 드레인 전류는 400mA/mm이었다. RF 및 잡음 특성은 전류 이등 차단 주파수($f_T$)가 65GHz이고, 주파수 9GHz에서 최소 잡음 지수는 0.7dB, 관련 이득은 14.8dB이었다. 이때의 바이어스 조건은 Vds가 2V이고, Ids는 60%Idss이었다. 저잡음 증폭기 설계에 있어서, 회로 Topology는 인덕턴스 직렬 궤환(Series Feedback)으로 쇼토 스터브(Short Stub)를 사용하였다. 이때 최적의 쇼트 스터브 길이를 찾기 위해, 직렬 궤환에 의한 잡음 지수와 이득 특성, 그리고 안정성에 대한 영향을 조사하였다. 설계된 회로의 특성은 주파수 8.9-9.5GHz에서 이득이 33dB이상, 잡음 지수가 1.2dB이하, 그리고 입출력 반사 계수가 각각 15dB와 14dB이하로 우수한 성능을 보였다. 따라서 제작된 소자가 고이득 X-밴드용 저잡음 증록기에 매우 적합한 소자임을 확인할 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.461-465
• /
• 2016

n-type silicon shows the better tolerance towards metal impurities with a higher minority carrier lifetime compared to p-type silicon substrate. Due to better lifetime stability as compared to p-type during illumination made the photovoltaic community to switch toward n-type wafers for high efficiency silicon solar cells. We fabricated the front electrode of the n-type solar cell with AgAl paste. The electrodes characteristics of the AgAl paste depend on the contact junction depth that is closely related to the firing temperature. Metal contact depth with p+ emitter, with optimized depth is important as it influence the resistance. In this study, we optimize the firing condition for the effective formation of the metal depth by varying the firing condition. The firing was carried out at temperatures below $670^{\circ}C$ with low contact depth and high contact resistance. It was noted that the contact resistance was reduced with the increase of firing temperature. The contact resistance of $5.99m{\Omega}cm^2$ was shown for the optimum firing temperature of $865^{\circ}C$. Over $900^{\circ}C$, contact junction is bonded to the Si through the emitter, resulting the contact resistance to shunt. we obtained photovoltaic parameter such as fill factor of 76.68%, short-circuit current of $40.2mA/cm^2$, open-circuit voltage of 620 mV and convert efficiency of 19.11%.

• 대한전자공학회논문지SD
• /
• 제49권7호
• /
• pp.1-9
• /
• 2012

기존의 LED 패키지가 갖는 온도에 따른 광 특성 변화 문제를 해결하기 위하여 온도센서가 집적된 LED 패키지 시스템을 제안하였다. 패키지의 온도를 실시간으로 측정하기 위하여 정확도가 우수하며 온도에 따른 저항의 변화가 선형적인 특징을 갖는 온도센서(RTD 형)를 설계하였으며, 장기간의 안정성을 보장하기 위하여 안정된 박막의 증착조건을 결정하고 이를 바탕으로 $1.560{\Omega}/^{\circ}C$의 민감도를 갖는 온도센서를 패키지 내부에 제작하였다. 제작된 패키지를 이용하여 온도에 무관하게 일정한 광량을 나타내는 시스템의 구현을 위하여 변환 회로부와 제어 회로부를 제작하고 이들을 결합함으로써, 패키지의 온도 변화에 따라 PWM duty ratio의 변화를 통해 광 출력을 보상해 주는 시스템을 제안하고 제작하였다. LED의 동작온도인 $0^{\circ}C$에서 $140^{\circ}C$ 범위에서 PWM duty ratio를 관측한 결과 제안했던 일정한 광량을 위한 PWM duty ratio에 매우 근접한 출력 신호를 발생시키는 것을 확인할 수 있었다.

• 한국콘텐츠학회논문지
• /
• 제9권6호
• /
• pp.256-265
• /
• 2009

레이저 출력은 20w에서 100w까지 연속적으로 조절이 되고 노출시간은 0.01초에서 수초 사이로 조절이 가능 하다. 펄스동작은 레이저 빔을 주기적으로 차단할 수가 있고 슈퍼펄스는 0.1$\sim$1ms사이에서 방전을 이루어지며, 순간적인 레이저 출력은 5$\sim$10 까지 증가된다. 특히, 자궁암의 경우 자궁구 내벽에서 악성세포를 제거해야 하므로 펄스에 대한 튜브출력의 안정이 매우 중요하다. 따라서, 본 연구에서는 영전압 스위칭동작을 확보하여 컨버터 1 차측 주 회로에 고주파 변압기 누설인덕턴스($L_1$) 증가 및 직렬 인덕터 없이 안정된 소프트 스위칭 동작영역이 확보, 인덕터($L_f$)전류의 순환전류 경로차단 컨버터 1차측 주회로 스위칭소자와 고주파 변압기의 도통손실이 크게 줄어, 고주파 2차측 정류부($D_5,\;D_6$)도 소프트 스위칭 되고, 스위칭손실 흡수분을 부하로 회생할 수 있는 특징을 갖고, 튜브안정화가 되어 설계 및 제작하여 실험한 결과, 기존장비에 비해 10%의 향상된 결과를 가져왔고, 추후 시스템적으로 보완을 하면 우수한 결과가 될 것으로 사려 된다.

• Smart Structures and Systems
• /
• 제30권5호
• /
• pp.521-535
• /
• 2022

Efficient management of deteriorating civil infrastructure is one of the most important research topics in many developed countries. In particular, the remote displacement measurement of bridges using linear variable differential transformers, global positioning systems, laser Doppler vibrometers, and computer vision technologies has been attempted extensively. This paper proposes a remote displacement measurement system using closed-circuit televisions (CCTVs) and a computer-vision-based method for in-situ bridge bearings having relatively large displacement due to temperature change in long term. The hardware of the system is composed of a reference target for displacement measurement, a CCTV to capture target images, a gateway to transmit images via a mobile network, and a central server to store and process transmitted images. The usage of CCTV capable of night vision capture and wireless data communication enable long-term 24-hour monitoring on wide range of bridge area. The computer vision algorithm to estimate displacement from the images involves image preprocessing for enhancing the circular features of the target, circular Hough transformation for detecting circles on the target in the whole field-of-view (FOV), and homography transformation for converting the movement of the target in the images into an actual expansion displacement. The simple target design and robust circle detection algorithm help to measure displacement using target images where the targets are far apart from each other. The proposed system is installed at the Tancheon Overpass located in Seoul, and field experiments are performed to evaluate the accuracy of circle detection and displacement measurements. The circle detection accuracy is evaluated using 28,542 images captured from 71 CCTVs installed at the testbed, and only 48 images (0.168%) fail to detect the circles on the target because of subpar imaging conditions. The accuracy of displacement measurement is evaluated using images captured for 17 days from three CCTVs; the average and root-mean-square errors are 0.10 and 0.131 mm, respectively, compared with a similar displacement measurement. The long-term operation of the system, as evaluated using 8-month data, shows high accuracy and stability of the proposed system.

• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.271-277
• /
• 2014

To overcome the limitations of the solid oxide fuel cells (SOFCs) due to the high temperature operation, there has been increasing interest in proton conducting fuel cells (PCFCs) for reduction of the operating temperature to the intermediate temperature range. In present work, the perovskite $BaCe_{0.85-x}Zr_xY_{0.15}O_{3-\delta}$ (BCZY, x = 0.1, 0.3, 0.5, and 0.7) were synthesized via solid state reaction (SSR) and adopted as an electrolyte materials for PCFCs. Powder characteristics were examined using X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Brunauer, Emmett and Teller (BET) surface area analysis. Single phase BCZY were obtained in all compositions, and chemical stability was improved with increasing Zr content. Anode-supported cell with $Ni-BaCe_{0.55}Z_{0.3}Y_{0.15}O_{3-\delta}$ (BCZY3) anode, BCZY3 electrolyte and BCZY3-$Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-\delta}$ (BSCF) composite cathode was fabricated and electrochemically characterized. Open-circuit voltage (OCV) was 1.05 V, and peak power density of 370 ($mW/cm^2$) was achieved at $650^{\circ}C$.