• 전력전자학회논문지
• /
• 제26권3호
• /
• pp.176-182
• /
• 2021

This research proposes a high-frequency circuit that can accurately predict the differential mode noise of single-phase inverters at the circuit design stage. Proposed single-phase inverter high frequency circuit in the work is a form in which harmonic impedance components are added to the basic single-phase inverter circuit configuration. For accurate noise prediction, parasitic components present in each part of the differential noise path were extracted. Impedance was extracted using a network analyzer and Q3D in the measurement range of 150 kHz to 30 MHz. A high-frequency circuit model was completed by applying the measured values. Simulations and experiments were conducted to confirm the validity of the high-frequency circuit. As a result, we were able to predict the resonance point of the differential mode voltage extracted as an experimental value with a high-frequency circuit model within an approximately 10% error. Through this outcome, we could verify that differential mode noise can be accurately predicted using the proposed model of the high-frequency circuit without a separate test bench for noise measurement.

• 대한기계학회논문집A
• /
• 제38권8호
• /
• pp.869-874
• /
• 2014

임의형상 제작기술을 이용하면 원하는 형상을 빠르게 제작할 수 있다. 하지만 임의형상 제작기술을 직접 제품을 생산하기 위한 제조기술에 적용하기 위해서는 문제점들이 있다. 이에, 하나의 대안으로써 다중재료 임의형상 제작기술이 주목 받고 있다. 특히 다중재료 임의형상 제작기술을 이용하면 기존의 2 차원 PCB 와는 다른, 회로 소자의 배열 및 외부 형상의 제약이 적은 3 차원 회로 장치를 제작 할 수 있다. 본 연구에서는 3 차원 회로 장치 제작을 위하여 FDM 방식과 직접주사 방식을 통합한 장치를 설계하고, 이 장치를 이용하여 3 차원 회로장치를 제작하였다. 즉, LED와 조도센서를 이용한 3 차원 회로 장치를 제작하여 작동을 확인하였으며, 자동화된 3 차원 회로 장치의 제작을 위한 임의형상 제작 기술과 직접주사 기술이 통합된 시스템 개발에 대한 기초연구를 수행하였다.

• 한국인터넷방송통신학회논문지
• /
• 제21권2호
• /
• pp.131-136
• /
• 2021

직류 전동기 (DC Motor)는 유도전동기와 더불어 광범위한 영역에서 사용되고 있는 중요한 구동원이다. 비록 구조가 복잡하고 유지보수의 측면에서 불리한 점이 있어 오늘날 산업의 동력원으로서 대부분의 수요를 유도전동기에 내어준 상태이지만 우수한 제어성능으로 인하여 소형의 제어용 전동기로는 직류 전동기가 꾸준하게 사용되는 중이다. 또한 계자에 영구자석을 쓸 수 있는 구조로 자석재료의 발달과 더불어 고출력, 고효율 운전이 가능한 구조의 직류 전동기가 개발되고 있다. 그리고 인버터를 이용한 유도전동기의 경우보다 제어기의 구성이 단순하여 아직도 직류 전동기를 선호하는 수요도 무시할 수 없을 정도여서 여전히 중요한 동력원으로 자리를 차지하고 있는 전동기이다. 이러한 경향을 고려하여 본 논문에서는 시뮬레이션을 통한 모델링, EPLD를 이용한 PWM 발생회로 및 전동기구동회로, 프로세서 이용한 PI 제어 등의 하드웨어 구현을 통한 직류전동기의 제어성능을 살펴보고자 한다.

• 전력전자학회논문지
• /
• 제16권2호
• /
• pp.199-207
• /
• 2011

전기 장치용 리튬폴리머 전지의 전기적 모델링은 전기에너지 공급시스템의 특성을 파악하는데 매우 중요하다. 본 논문은 리튬폴리머 전지의 동적특성을 모사하기 위한 전기적 등가 모델을 제안하였다. 리튬폴리머 전지의 충/방전 실험은 Maccor 8500 충방전시험장치를 사용하였다. 측정된 데이터를 이용하여 전지의 R-C 값을 선정하였으며, 선정된 값은 다항식 함수와 지수 함수를 사용하여 수식으로 나타내었다. 시뮬레이션 결과와 실험결과를 비교하여 제안된 모델의 타당성을 검증하였다

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.153-156
• /
• 2001

Maximum Power Point Tracking(MPPT) is used in wind power generation systems to maximize wind power turbin output power, irrespective of wind speed conditions and of the load electrical characteristics. In this paper we do the equivalent modeling the mechanical energy of wind power turbine according to wind speed into the synchronous generator. We analyse the equivalent modeling output part of rectifier into DC/DC converter input part theoretically. We design a control algorithm for variable voltage according to wind speed intensity and density so that load voltage of chopper is controlled steadily using the maximum power point tracking (MPPT) control method. We analyse a battery charging characteristics and a charging circuit for power storage enabling the supply of stable power to the load. We design a system and do the modeling of it analytically so that it supplies a stable power to the load by constructing a DC-AC inverter point. Also we design a charging circuit usable in actual wind power generation system of 30kW and confirm its validity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.153-156
• /
• 2001

Maximum Power Point Tracking(MPPT) Is used in wind power generation systems to maximize wind power turbin output power, irrespective of wind speed conditions and of the load electrical characteristics. In this paper we do the equivalent modeling the mechanical energy of wind power turbine according to wind speed into the synchronous generator. We analyse the equivalent modeling output part of rectifier into DC/DC converter input part theoretically. We design a control algorithm for variable voltage according to wind speed intensity and density so that load voltage of chopper is controlled steadily using the maximum power point tracking(MPPT) control method. We analyse a battery charging characteristics and a charging circuit for power storage enabling the supply of stable power to the load. We design a system and do the modeling of it analytically so that it supplies a stable power to the load by constructing a DC-AC inverter point. Also we design a charging circuit usable in actual wind power generation system of 30kW and confirm its validity.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.288-295
• /
• 2019

Rectifiers are widely used in industrial applications. Although detailed models of rectifiers are usually used to evaluate their performance, they are complex and time-consuming. Therefore, the Average Value Model (AVM) has been introduced to meet the demand for a simple and accurate model. This type of rectifier modeling can be used to simplify the simulations of large systems. The AVM of diode rectifiers has been an area of interest for many electrical engineers. However, healthy diode rectifiers are only considered for average value modeling. By contrast, faults occur frequently on diodes, which eventually cause the diodes to open-circuit. Therefore, it is essential to model bridge rectifiers under this faulty condition. Indeed, conventional AVMs are not appropriate or accurate for faulty rectifiers. In addition, they are significantly different in modeling. In this paper, a novel application of the parametric average value of a three-phase line-commutated rectifier is proposed in which one diode of the rectifier is considered open-circuited. In order to evaluate the proposed AVM, it is compared with experimental and simulation results for the application of a brushless synchronous generator field. The results clearly demonstrate the accuracy of the proposed model.

• 전력전자학회논문지
• /
• 제21권5호
• /
• pp.396-403
• /
• 2016

Usually, large-sized buses and trucks have a very high load. In addition, frequent braking during downhill or long-distance driving, causes the conventional method using the brake friction to have a problem in safety because of brake fade and brake burst phenomenon. Auxiliary brakes dividing the braking load is essential. Hence, environment-friendly auxiliary brakes, such as contactless brake rather than the engine auxiliary brake system are needed. A study aimed at improving the energy efficiency by recharging electric energy with changing mechanical to electrical energy that occurs when braking is actively in progress. In this paper, the voltage control method is utilized to recover the electric energy generated in the electromagnetic retarder instead of the eddy current. To regenerate the braking energy into the electrical energy, the resonant L-C circuit is configured in the retarder. The voltage generated in the retarder is simply modeled as a transformer. However, retarder voltage control in this paper is simulated by modeling the induction generator because this induction generator modeling is more practical than transformer modeling. The changes in the voltage of the resonance circuit, which depends on the switch pulse duration of the control device, were analyzed. A PI controller algorithm to control this voltage is proposed. The feasibility of modeling retarder and voltage controller are shown by using MATLAB Simulink in this paper.

• 한국전기전자재료학회논문지
• /
• 제19권12호
• /
• pp.1099-1105
• /
• 2006

In this paper, the equivalent circuit model of a Rosen-type multilayer piezoelectric transformer(MPT) has been proposed based on the Mason's equivalent circuit model and the principle of single layer piezoelectric plate. From the piezoelectric direct and converse effects, the symbolic expressions between the electric inputs and outputs of the MPT have been derived from the equivalent circuit model. A simplified equivalent circuit model of the MPT whose driving part has a single input form has been proposed. The symbolic expressions of the driving part have been derived from the simplified equivalent circuit model and the model was compared with the multi-input equivalent circuit model through the simulation. In the comparisons between the simulation results and the experimental data, output voltage is 630 Vp-p in case of 11-layered MPT and 670 Vp-p for 13-layered MPT over the experiment range. As the load resistance increases, output voltage increases and saturates over $300k{\Omega}$ and the resonant frequency changes from 102 kHz to 103 kHz. The simulation and the experimental results agree well over different load resistances and frequencies.

• 한국전자파학회논문지
• /
• 제25권1호
• /
• pp.47-52
• /
• 2014

본 논문에서는 대면적 정전식 터치스크린 구동 회로를 설계하기 위하여 여러 가지 터치스크린 패널 구조의 회로 모델을 제안하고, 그 모델의 사용 가능한 주파수 영역을 분석하였다. 터치스크린 패널 한 개 셀의 2D EM 시뮬레이션 결과를 이용한 전체 패널의 circuit 시뮬레이션을 통하여, 23인치 대면적 패널의 가장 긴 채널과 짧은 채널을 5개의 RC 소자의 회로 모델로 근사하였다. EM/circuit 시뮬레이션과 5개 소자의 RC 모델의 S 파라미터 비교를 통해, 5개 소자 모델이 130 kHz까지 10도 이내의 채널 위상 차이를 가지는 것을 확인하였다. 7개 RC 소자를 사용한 모델을 통하여 10도 이내의 채널 위상 차이를 가지는 모델의 주파수 영역을 200 kHz까지 확장하였다.