• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.170-176
• /
• 2004

Objectives : In the unique metal iris method. the developing interfacial gap at the cavity floor resulting from the cavity wall property during polymerizing composite resin might affect the nominal shear bond strength values. The aim of this study is to evaluate that the iris method reduces the cohesive failure in the substrates and the cavity wall property effects on the shear bond strength tests using iris method. Materials and Methods : The occlusal dentin of 64 extracted human molars were randomly divided into 4 groups to simulate two different levels of cavity wall property (metal and dentin iris) and two different materials ($ONE-STEP^{\circledR}$ and $ALL-BOND^{\circledR}$ 2) for each wall property. After positioning the iris on the dentin surface. composite resin was packed and light-cured. After 24 hours the shear bond strength was measured at a crosshead speed of 0.5 mm/min. Fracture analysis was performed using a microscope and SEM. The data was analyzed statistically by a two-way ANOV A and t-test. Results : The shear bond strength with metal iris was significant higher than those with dentin iris (p＝0.034). Using $ONE-STEP^{\circledR}$, the shear bond strength with metal iris was significant higher than those with dentin iris (p＝0.005), but not in $ALL-BOND^{\circledR}$ 2 (p＝0.774). The incidence of cohesive failure was very lower than other shear bond strength tests that did not use iris method. Conclusions：The iris method may significantly reduce the cohesive failures in the substrates. According to the bonding agent systems. the shear bond strength was affected by the cavity wall property.

• Archives of Pharmacal Research
• /
• v.26 no.7
• /
• pp.569-574
• /
• 2003

Controlled-release amitriptyline pellets (ATP) were formulated and its oral bioavailability was assessed in human volunteers after oral administration under fasting conditions. Core pellets were prepared using a CF granulator by two different methods (powder layering and solvent spraying) and coated with Eudragit RS or RL 100. Physical characteristics and dissolution rates of core pellets and coated pellets were evaluated to optimize the formulation. Powder layering method resulted in a better surface morphology than solvent spraying method. However, physical properties of the products were poorer when prepared by powder layering method with respect to hardness, friability and density. The dissolution profile of amitriptyline coated with Eudragit RS 100 was comparable to that of commercially available amitriptyline enteric-coated pellets ($Saroten^{\circledR}$ retard). After the oral administration of both products at the dose of 50 mg, the mean maximum concentrations ($C_{max}$) were 36.4 and 29.7 ng/mL, and the mean areas under the concentration-time curve ($AUC_{0-96}$) were 1180.2 and 1010.7 ng.h/mL for ATP and Saroten retard, respectively. The time to reach the maximum concentrations ($T_{max}$) was 6 h for both formulations. Statistical evaluation suggested that ATP was bioequivalent to Saroten retard.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.1
• /
• pp.29-36
• /
• 2004

A flexible packaging scheme, which includes chip packaging, has been developed using a thinned silicon chip. Mechanical characteristics of thinned silicon chips are examined by bending tests and finite element analysis. Thinned silicon chips (t<30 $\mu\textrm{m}$) are fabricated by chemical etching process to avoid possible surface damages on them. And the chips are stacked directly on $Kapton^{Kapton}$film by thermal compressive bonding. The low height difference between the thinned silicon chip and $Kapton^{Kapton}$film allows electroplating for electrical interconnection method. Because the 'Chip' is embedded in the flexible substrate, higher packaging density and wearability can be achieved by maximized usable packaging area.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.1
• /
• pp.15-22
• /
• 2007

An oil-in-water solvent evaporation method was used to prepare the cyclosporin A (CyA)-loaded nanoparticles varying in poly (D,L-lactide-co-glycolide) (PLGA) polymer (RG 502H, RG 503H) and the amount of additive ethyl myristate (EM) or chitosan (CS). The particles were characterized for drug loading and entrapment efficiency by HPLC, surface morphology by scanning electron microscopy, particle size by dynamic light scattering and surface charge by Zetapotential. The results showed drug loadings ranging from 10.9% to 15.8% with high encapsulation efficiency (82.0-97.8%). SEM and DLS studies showed discrete and spherical particles with smooth surfaces and mean size ranging 257.6-721.7 nm. The additive EM or CS did not change the mean sizes of the nanoparticles, whereas by the coating effect of CS, the Zetapotential values of the CS-added nanoparticles were moved to the more positive direction as the amount of CS was increased. From the pharmacokinetic analysis, the nanoparticles formulations showed the higher bioavailability and MRT than $Neoral^{\circledR}$ While little adding effect of EM or CS was detected in pharmacokinetic profile when RG 503H was used as polymer carrier, more noticeable different pharmacokinetic behaviors could be observed in case of RC 502H. EM incorporation was found to elevate the $K_{el}$, whereas CS coating resulted in the decrease of F and $K_{el}$, which seems to be due to the function of CS as a barrier and a mucoadhesive coating.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.508-512
• /
• 1998

The NTC thermistors were sintered by using microwave hybrid heating method at $1100^{\circ}C$~$1300^{\circ}C$ and those electrical properties were investigated. The obtained $B_{25^{\circ}C/85^{\circ}C}$ values from temperature dependence of electrical resisitivity were around 3100~3200 K which were almost the same values as conventionally sintered ones. Compared with conventional sintering process, this process could complete whole sintering process within 20 minutes. This the processing time and energy consumption could be reduced through this rapid heating by using microwave hybrid heating.t there were showed only two peaks, glycolide melting peak and lower molecular weight melting peak without lauryl alcohol. Conversion increased slowly with the reaction time up to 50 minutes, and then gave a sudden increase above that. The reaction time to disappear in glycolide melting peak during polymerization was shortened with the increase of lauryl alcohol content. Zero-shear viscosity of polyglycolic acid decreased with the increase of free acid content in glycolide.ssional energy and bending hysteresis increased. \circled3 Surface characteristics such as friction coefficient and thickness variation of highly shrinkage fabrics became relatively roughened state. \circled4 Since stiffened and roughened characteristics of highly shrinkage fabrics, drapabilities of them were significantly lowered. Additionally thermal insulation property of high shrinkage fabric was higher than that of low shrinkage fabric due to bulky and thickened feature. From the results, it is considered that the silk fabrics with high filling shrinkage have the good bulkiness and heat keeping properties and thus they have the suitable characteristics for high quality men's and women's formal garments.

• Journal of Korean Society of Transportation
• /
• v.21 no.6
• /
• pp.57-65
• /
• 2003

Traffic congestion on the streets is the major concern of Metropolitan areas in Korea. Especially the signalized intersections are the main spots where traffic congestion is to be created. Currently the subway construction has been on the process in Taegu Metropolitan city. The subway stations are usually located at the intersections where a large number of vehicles and people are moving. During the constructional period, such an intersection creates profoundly a great deal of traffic congestion due to the open-cut constructional method. Under circumstance of the constructional method, the lane configurations should be changed frequently and the surface conditions make drivers uncomfortable. The propose of this study is to propose the improved method of traffic operation at the large circled intersection under the construction. The Signalized Modern Roundabout(SMR) is applied modifying from the modern roundabout. The geometric design and signal operation of SMR is developed in this study. To verify the operation of SMR the comparative study is conducted between the operation of the open-cut method and SMR method using the micro-simulation program, NETSIM. The result of simulation shows that the delay caused by the operation of SMR is not higher than that under the open-cut method. SMR makes also the constructional period shorten, makes the cost of construction lessened and makes drivers more comfortable as well than the method of open-cut. Therefore, the study concludes that the operation of SMR is more efficient, economic and safer method than that of open-cut method at the large circled intersection under construction.

• The Korea Journal of Herbology
• /
• v.22 no.2
• /
• pp.45-50
• /
• 2007

objectives: We investigated the moisturizing and cooling effects of the cosmetic product with Scrophularia Buergeriana, Poria Cocos, Lonicera Japonica, Portulaca Oleracea and Ginko Biloba extract on human skin by using non-invasive instrument. Methods: We measured physiological effects after volunteers(female, n=5) applied the cosmetic product containing the extract of oriental herbs. The forearm skin moisturization was measured with $Corneometer^{\circledR}$ CM825 after 15min, 3hr, and 6hr. The forearm skin surface roughness was with Scanning electron microscopy after 15min, and 6hr. The face skin temperatures cooling and microcirculation effects were measured with ThermaCAMTM PM525 and LDl-Periscan PlM II after 15min, and 30min. Results: The forearm skin moisturization was imcreased 108% after 15min. The forearm skin surface roughness was decreased significantly after 15min. The face skin temperatures were cooling down to $30.7^{\circ}C$. The face skin microcirculation effect was normalized time-dependently. Conclusions: We concluded that cosmetic product containing the extract of Scrophularia Buergeriana, Poria Cocos, Lonicera Japonica, Portulaca Oleracea and Ginko Biloba had a moisturization effect and improving the surface roughness, temperature and microcirculation on the human skin.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.7 s.155
• /
• pp.1090-1102
• /
• 2006

The purpose of this study is to develop an improved work clothing which is much safe, comfortable, mobility and convenient than what workers currently wear at construction site. The investigation has been conducted to evaluate current work clothing to grasp any problems, discomforts and damages related to the work clothing. For the best and accurate data, hands-on investigation and a short-interview have been performed at the construction site as well as formulating a questionnaire. The questionnaires was answered by 425 workers and safety manager of 13 different construction site. The result of the questionnaire enables us to design a sample work clothing, many pa π s such as material, pattern and design have been improved. To improve the amenity of heat, the surface of a material was used by $Aerocool^{\circledR}$ fiber which contains inside dryness function. In order to absorb perspiration on the back the armpits, mesh martial that is mixture of $Coolever^{TM}$ fiber and $Mirawave^{TM}$ fiber was used to absorb perspiration in an effective manner. And a sleeve's bottom part and trousers' bottom part's cover method have been changed. Sample work clothing was shorten at the side of upper garment up to 2cm and lengthen the length of the back by 3cm. To reduce the tightness around armpit more room was given in that area. Darts were added to the elbow, the hip, and the knees that also followed an ergonomic pattern. A sample work clothing evaluated an objective assessment and subjective assessment to compare to a current work clothing. Assessment group consists of seven subject groups and nine expert groups to evaluate external appearance and adaptability to the movements. In all aspects of the test, the result of evaluation process of the sample work clothing received more positive assessment than the current work clothing.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.3
• /
• pp.338-343
• /
• 2003

Various factors, such as the adsorption pH, adjuvant dose, and adjuvant age, which affect the adsorption degree and immunogenicity of an antigen, were investigated. In addition, the effect of pH, antigen content, and adjuvant content on immunogenicity was also studied through animal experiments. Within the ranges studied, a low pH for adsorption, freshly preformed gel, and low pH formulation for the combined DTwP-HepB vaccine were preferrable for the adsorption of the antigens. In addition, a higher DT content was found to have a positive effect on the HBsAg immunogenicity in the combined vaccine. Accordingly, considering the factors affecting the adsorption rate and immunogenicity of the antigens, a novel DTwP-HepB vaccine (40 Lf/ml of diphtheria toxoid, 15 Lf/ml of tetanus toxoid, 20 OU/ml of detoxified whole cell pertussis, $24\;\mu\textrm{g}$ of HBsAg, $24\;\mu\textrm{g}\;Al/ml\;of \;Al(OH)_3\;gel,\;776\;\mu\textrm{g}\; Al/ml\;of\;AIPO_4\;gel$, and pH 7.1) was developed, whose immunogenicity was comparable to the case of administrating, separately and simultaneously, a combined DTwP vaccine (40 Lf/ml of diphtheria toxoid, 15 Lf/ml of tetanus toxoid, 20 OU/ml of detoxified whole cell pertussis, $300\;\mu\textrm{g}\;Al/ml\;of\; AIPO_4\;gel$, and pH 7.1) and mono HepB vaccine [$Hepavax^{\circledR},\;24\;\mu\textrm{g}/ml$ of HBsAg and $500\;\mu\textrm{g}\;Al/ml\;of\;Al(OH)_3\;gel$], which satisfies the potency criteria of the K-FDA for a combined DTwP vaccine and mono HepB vaccine.

• YAKHAK HOEJI
• /
• v.44 no.5
• /
• pp.440-447
• /
• 2000

Microspheres of felodipine, which is one of the calcium channel blocker using a mixture of Eudragi $t^{R}$ RL, L, E, and cellulose on the base of Eudragi $t^{R}$ RS were investigated. Cremopho $r^{R}$ was added to each preparation of polymers in order to increase the release of felodipine from microspheres. Felodipine-loaded microspheres were prepared by a solvent evaporation method, which is based on dispersion of methylene chloride containing felodipine and polymers in 0.5 w/v % polyvinyl alcohol solution. The average diameter based on the size distribution of the felodipine-loaded microspheres was observed to be ca. 40-55 ${\mu}{\textrm}{m}$. A good and smooth surface were showed in all types of the microspheres. The amount of felodipine loaded was over 90 w/w % in all types of microspheres. The dissolution profiles of felodipine from microspheres were similar with each type of polymer, and about a 60 w/w % of the total amount of felodipine loaded to microsphere was released within 7 hours. Dissolution rate of felodipine from the microsphere was increased by addition of Cremophor. After oral administration of the felodipine-loaded microspheres in PVA solution and felodipine alone in PEG solution to rats, respectively, the pharmacokinetic study revealed that the Tmax values of the microspheres were observed in the range of 0.67~l.0 hr while that of the felodipine solution was obtained 0.33 hr. In addition, the AUC of the microspheres at 0 to 7 hr was remarkably increased in comparison to that of felodipine solution. These results revealed that the microspheres based on Eudragit RS could be a good candidate for the controlled release drug delivery system for felodipine.e.e.e.