• 한국초지조사료학회지
• /
• 제37권4호
• /
• pp.264-270
• /
• 2017

이 연구는 배합사료 대체용 분쇄사일리지를 조제하기 위한 보리와 밀의 적정 수확시기와 사료가치 및 발효품질을 구명하고자 실시하였다. 그 결과, 수분함량은 새쌀보리와 금강밀 모두 수확시기가 늦어짐에 따라 감소하는 경향을 보였는데, 수분감소는 새쌀보리가 금강밀보다 더 빠르게 진행되었다. 생육특성에서 수확시기에 따른 초장길이의 변화는 없었고, 경수는 감소하는 경향을 보였다. 건물수량과 TDN수량은 새쌀보리는 출수 후 35일과 40일에서 출수 후 30일보다 유의적으로 높은 값을 보였고, 금강밀은 출수 후 40일과 45일에서 출수 후 35일보다 유의적으로 높은 값을 보였다(p<0.05). 조단백질 함량은 수확시기가 늦어질수록 새쌀보리와 금강밀 모두 증가하는 경향을 보였고, 조섬유, 조지방 및 조회분함량은 수확시기가 늦어짐에 따라 비슷하거나 약간 낮아지는 경향을 보였으나 통계적인 유의성은 없었다. NDF와 ADF 함량은 수확시기가 늦어짐에 따라 새쌀보리는 감소하는 경향을 보였고, 금강밀은 비슷한 경향을 보였으며, TDN 함량은 수확시기에 따라 새쌀보리는 다소 증가하는 경향을 보였으나, 금강밀은 비슷한 값을 나타냈다. 총체분쇄 사일리지의 발효 전 후 사료가치는 일반성분들이 약간 증가되는 경향이 있었지만 통계적인 유의성은 없었다. 발효품질면에서 수확시기가 늦어짐에 따라 새쌀보리는 pH가 높아지고 젖산함량이 유의적으로 낮아졌으며(p<0.05), 금강밀은 pH가 비슷한 값을 보였고, 젖산함량은 낮아지는 경향을 나타냈다. 따라서 총체분쇄 사일리지를 조제하기 위한 적정 수확시기는 수량성과 품질을 같이 고려해보면 새쌀보리는 출수 후 35일이 적절하고, 금강밀은 출수 후 40~45일이 적절할 것으로 사료된다.

• Korean Chemical Engineering Research
• /
• 제56권4호
• /
• pp.577-584
• /
• 2018

본 연구는 목질계 섬유판 제조에 있어 목섬유에 대한 도계부산물인 닭털의 부분적 대체화 가능성을 검토하기 위하여 수행하였다. 닭털은 주로 케라틴계 단백질로 구성되어 있으며, 외형적으로 목섬유와 큰 차이는 없었다. 닭털의 전처리 방법에 따른 포름알데히드 흡착능을 비교한 결과, 닭털을 고온/고압에서 처리하고 분쇄한 우모분에서 가장 높았다. 한편 일반 가위로 절단한 닭털과 이를 가정용 믹서로 고해시킨 닭털의 폼알데히드 흡착량을 dinitrophenylhydrazine법으로 측정한 결과 차이는 없었다. 닭털, 고해 닭털, 우모분을 각각 목섬유의 전건무게를 기준으로 5 wt%로 혼합하여 제조한 중밀도섬유판(MDF)의 물성과 폼알데히드방출량은 닭털의 전처리 조건에 영향을 받지 않았다. 그러나 이 측정치를 목섬유만으로 제조한 MDF와 비교하였을 때, 두께팽윤율과 폼알데히드방출량은 크게 개선되었다. 따라서 현재 생산 현장에서 적용되고 있는 요소수지를 이용한 MDF 제조에 있어 목섬유와 함께 일정한 양의 닭털, 고해 닭털 또는 우모분을 첨가할 경우 치수안전성과 폼알데히드방출량이 개선된 MDF의 제조가 가능할 것으로 예상된다. 그러나 MDF제조에 있어 닭털의 사용은 현재 상황에서 목섬유와 비교하여 원료 확보의 어려움과 높은 단가로 경제성이 낮은 것으로 조사되었다. 경제성 향상을 위하여 중소형 도계장에서 발생하는 닭털을 이용하거나, 동물성 사료의 금지에 대한 대비책 및 인플루엔자 감염 조류에 대한 환경적 처리 방안으로 닭털의 섬유판 원료에 대한 부분적 대체화 기술은 향후 사용 가능성이 충분할 것으로 판단된다.

• Journal of Mechanical Science and Technology
• /
• 제14권3호
• /
• pp.320-330
• /
• 2000

It is desirable to perform nondestructive evaluation (NDE) to assess material properties and part homogeneity because the manufacturing of carbon/carbon brake disks requires complicated and costly processes. In this work several ultrasonic techniques were applied to carbon/carbon brake disks (322mm ad, 135mm id) for the evaluation of spatial variations in material properties that are attributable to the manufacturing process. In a large carbon/carbon disk manufactured by chemical vapor infiltration (CYI) method, the spatial variation of ultrasonic velocity was measured and found to be consistent with the densification behavior in CYI process. Low frequency (e.g., 1-5MHz) through-transmission scans based on both amplitude and time-of-flight of the ultrasonic pulse were used for mapping out the material property inhomogeneity. Images based on both the amplitude and the time-of-flight of the transmitted ultrasonic pulse showed significant variation in the radial direction. The radial variations in ultrasonic velocity and attenuation were attributed to a density variation caused by the more efficient densification of pitch impregnation near the id and od and by the less efficient densification away from the exposed edged of the disk. Ultrasonic velocities in the edges of the disk. Ultrasonic velocities in the thickness direction were also measured as a function of location using dry-coupling transducers ; the results were consistent with the densification behavior. However, velocities in the in-plane directions (circumferential and radial) seemed to be affected more by the relative contents of fabric and chopped fiber, and less by the void content.

• Structural Engineering and Mechanics
• /
• 제43권6호
• /
• pp.823-833
• /
• 2012

An experimental method was suggested for obtaining fracture toughness ($K_{Ic}$) and the tensile strength (${\sigma}_t$) of chopped strand glass fiber reinforced polymer concretes (PC). Semi-circular bend (SCB) specimens subjected to three-point bending were used for conducting the experiments on the PC material. While the edge cracked SCB specimen could be used to evaluate fracture toughness, the tensile strength was obtained from the un-cracked SCB specimen. The experiments showed the practical applicability of both cracked and un-cracked SCB specimens for using as suitable techniques for measuring $K_{Ic}$ and ${\sigma}_t$ in polymer concretes. In comparison with the conventional rectangular bend beam specimen, the suggested SCB samples need significantly less material due to its smaller size. Furthermore, the average values of ${\sigma}_t$ and $K_{Ic}$ of tested PC were approximately 3.5 to 4.5 times the corresponding values obtained for conventional concrete showing the improved strength properties of PC relative to the conventional concretes.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권9호
• /
• pp.1274-1280
• /
• 2015

This study was conducted to assess the effects of microbial and chemical combo additives on nutritive values, fermentation indices and aerobic stability of whole crop barley silage. Barley forage (Youngyang) was harvested at about 30% dry matter (DM) by treatments, chopped to 5 cm length and treated with distilled water only (CON), Lactobacillus plantarum (INO), propionic acid (PRO) or an equal mixture of INO and PRO (MIX). Barley forages were ensiled in 4 replications for 0, 2, 7, and 100 days. On 100 days of ensiling, MIX silage had higher (p<0.05) in vitro DM digestibility than CON silage, but lower (p<0.05) acid detergent fiber concentration. The pH in all treated silages was lower (p<0.05) than CON silage. The MIX silage had higher (p<0.05) lactate concentration and lactate to acetate ratio than in CON, but lower (p<0.05) yeast count. Aerobic stability in CON, PRO, and MIX silages were higher (p<0.05) than in INO silage. It is concluded that microbial and chemical combo additives using L. plantarum and propionic acid could efficiently improve nutritive values of barley silage in terms of increased in vitro DM digestibility compared to other treatments. In addition, all treatments except CON reduced yeast count which is the initiate microorganism of aerobic spoilage.

• Composites Research
• /
• 제29권5호
• /
• pp.243-248
• /
• 2016

열경화성 탄소 섬유 복합재료 분리판은 높은 기계적 특성뿐만 아니라 높은 내산성을 갖으나, 높은 제조단가 및 낮은 자체저항이 극복해야 할 가장 큰 장애물이다. 따라서 본 연구에서는, 열가소성 폴리머를 복합재료 분리판의 기지로 적용하여 분리판 생산성과 자체저항이 모두 증가된 열가소성 탄소 복합재료 분리판을 개발하였다. 전기 전도도 및 기계 강도를 증가시기키 위하여 평직 형태의 탄소 섬유 직물을 사용하였으며, 분리판의 자체 저항을 감소시키기 위하여 전도성 나노입자를 열가소성 기지에 혼합하였다. 개발된 분리판의 면적 비저항 및 기계물성을 고온 연료전지 작동 온도 및 스택의 체결압에 따라 측정하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권1호
• /
• pp.55-60
• /
• 2002

A metabolism trial with four castrated male Brahman cattle, average body weight 320 kg, was conducted in order to determine the nutritive value of chopped sugarcane stalk (CSS) for the establishment of feeding strategy in the dry season in Northeast Thailand. Animals were subjected to the following four dietary treatments: Treatment 1; 100% of CSS, Treatment 2; 70% of CSS and 30% of commercial complete feed (TMR), Treatment 3; 40% of CSS and 60% of TMR, and Treatment 4; 100% of TMR. The average CP, ether extracts, nitrogen free extracts, crude fiber and ash contents of CSS were 2.0, 0.9, 79.0, 16.1 and 2.2%, respectively. Although the amount of feed given was approximately at maintenance level, animals in treatments 1 and 2 refused a part of feed. The metabolism trial revealed that total digestible nutrient and metabolizable energy contents of CSS were 61.5% and 9.04 MJ/kgDM, respectively, when it was properly supplemented with protein sources. Nutritive value of CSS was lowered when animals were given CSS solely. This was due to the large loss of energy into urine and methane. Voluntary intake of CSS in cattle was not enough to satisfy energy requirement for maintenance. The CSS can be used as a roughage for feeding cattle in the dry season with proper supplementation of protein and energy.

• 한국초지조사료학회지
• /
• 제39권4호
• /
• pp.292-297
• /
• 2019

본 연구는 국내산 사료용 벼를 수집하여 근적외선분광법을 이용한 신속한 품질평가를 위하여 2018년 조사료 품질분석 기관의뢰 된 시료 564점을 수집하여 품질평가 NIR-DB를 구축하고 구축된 DB를 바탕으로 최적의 품질평가 검량식을 개발하고 검증하였다. 각 성분별로 예측 정확성을 평가하기 위해 스펙트라를 측정한 값과 실험실 분석값 간의 상관관계를 이용한 다변량분석법을 이용하였다. 사료용 벼의 수분함량 평가에 대한 예측능력은 각각 SEC 1.66% (R²=0.99)와 SECV 1.81% (R²=0.98)로 나타나 사료가치 평가 성분 중 가장 우수한 예측 능력을 보였으며, CP 함량 각각 SEC 0.42% (R²=0.93)와 SECV 0.50% (R²=0.89)로 나타났다. ADF와 NDF 함량의 예측능력은 각각 SEC 1.25% (R²=0.84), SECV 1.42% (R²=0.79) 및 SEC 1.61% (R²=0.90), SECV 1.79%(R²=0.86)로 나타났다. 사료용 벼의 품질 등급인 RFV의 예측 능력은 SEC 4.67% (R²=0.88), SECV 5.21% (R²=0.84)로 나타났다. 이상의 결과를 종합해보면 근적외선분광법을 이용하여 국내산 사료용 벼의 수분함량과 각종 영양성분을 적은 오차범위에서 분석·평가가 가능하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권12호
• /
• pp.1854-1863
• /
• 2019

Objective: To effectively use corn stover resources as animal feed, we explored the chemical composition and in vitro digestibility of corn stover during field exposure and the fermentation characteristics of silage prepared with lactic acid bacteria (LAB) and cellulase. Methods: Corn ears including the cobs and shucks were harvested at the ripe stage. The corn stover was exposed in the field under natural weather conditions. Silages were prepared after 0, 2, 4, 7, 15, 30, and 60 d of exposure. Corn stover was chopped into approximately 1 to 2 cm lengths and then packed into 5 liter plastic silos. The ensiling density was $550.1{\pm}20.0g/L$ of fresh matter, and the silos were kept at room temperature ($10^{\circ}C$ to $25^{\circ}C$). Silage treatments were designed as follows: without additives (control), with LAB, with cellulase, and with LAB+ cellulase. After 45 d of fermentation, the silos were opened for chemical composition, fermentation quality and in vitro digestion analyses. Results: After harvest, corn stover contained 78.19% moisture, 9.01% crude protein (CP) and 64.54% neutral detergent fiber (NDF) on a dry matter (DM) basis. During field exposure, the DM, NDF, and acid detergent fiber (ADF) contents of corn stover increased, whereas the CP and water-soluble carbohydrate contents and in vitro digestibility of the DM and CP decreased (p<0.05). Compared to the control silage, cellulase-treated silage had lower (p<0.05) NDF and ADF contents. The pH values were lower in silage treated with LAB, cellulase, or LAB+cellulase, and lactic acid contents were higher (p<0.05) than those of the control. Silage treated with cellulase or LAB+cellulase improved (p<0.05) the in vitro DM digestibility (IVDMD) compared to that of the control or LAB-treated silage. Conclusion: Corn stover silage should be prepared using fresh materials since stover nutrients are lost during field exposure, and LAB and cellulase can improve silage fermentation and IVDMD.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권6호
• /
• pp.820-826
• /
• 2013

The objective of this study was to determine the effect of rain tree pod meal with palm oil supplementation on feed intake, digestibility, microbial protein synthesis and microbial populations in dairy cows. Four, multiparous early-lactation Holstein-Friesian crossbred (75%) lactating dairy cows with an initial body weight (BW) of $405{\pm}40$ kg and $36{\pm}8$ DIM were randomly assigned to receive dietary treatments according to a $4{\times}4$ Latin square design. The four dietary treatments were un-supplementation (control), supplementation with rain tree pod meal (RPM) at 60 g/kg, supplementation with palm oil (PO) at 20 g/kg, and supplementation with RPM at 60 g/kg and PO at 20 g/kg (RPO), of total dry matter intake. The cows were offered concentrates, at a ratio of concentrate to milk production of 1:2, and chopped 30 g/kg of urea treated rice straw was fed ad libitum. The RPM contained condensed tannins and crude saponins at 88 and 141 g/kg of DM, respectively. It was found that supplementation with RPM and/or PO to dairy cows diets did not show negative effects on feed intake and ruminal pH and BUN at any times of sampling (p>0.05). However, RPM supplementation resulted in lower crude protein digestibility, $NH_3$-N concentration and number of proteolytic bacteria. It resulted in greater allantoin absorption and microbial crude protein (p<0.05). In addition, dairy cows showed a higher efficiency of microbial N supply (EMNS) in both RPM and RPO treatments. Moreover, NDF digestibility and cellulolytic bacteria numbers were highest in RPO supplementation (p<0.05) while, supplementation with RPM and/or PO decreased the protozoa population in dairy cows. Based on this study, supplementation with RPM and/or PO in diets could improve fiber digestibility, microbial protein synthesis in terms of quantity and efficiency and microbial populations in dairy cows.