• Journal of the Mineralogical Society of Korea
• /
• v.12 no.2
• /
• pp.66-76
• /
• 1999

Intergrowth texture of biotite and chlorite crystals within an amphibolitic schist of the northwestern Okchon metamorphic belt was investigated using back-scattered electron (BSE) imaging and high-resolution transmission electron microscopy (HRTEM). BSE images show that thin chlorite and biotite packets are mixed along (001) plane to result in intergrowth texture. In addition, rutile particles of submicron size occur exclusively at the boundaries between biotite and chlorite stacks. HRTEM investigation and remnant biotite layers are closely associated with such boundaries, suggestinga possibility that chlorite layers were formed from biotite during retrograde metamorphic reaction. Such intepretation of the origin of intergrowth texture can be further supported biotite is approximately 2 w%, and that of chlorite usually lower than 0.2 wt%. Ti was apparently leached out during the alteratin of biotite to precipitate rutile particles at the such rutile particles could be an important indicator showing that the intergrowth texture of chlorite and biotite is originated by a retrograde metamorphism rather than by incomplete chlorite-to-biotite reaction during prograde metamorphism. Biotite crystals contain intercalated chlorite layers will result in somewhat high Mg and Al, and the use of such inhomogeneous biotite will result in impreciese geothermobarometric calculations.

• Economic and Environmental Geology
• /
• v.30 no.2
• /
• pp.163-174
• /
• 1997

Precambrian metapelites and metapsammites of the Jinan-Osu area (so-called Seologri and Yongamsan Formation) consist of black slate, phyllite, mica schist, quartzite and rarely calc schist. They are intruded by Sunkagsan granite gneiss, Foliated granodiorite, Amphibolite, Sunchang foliated granite and Namwon granite. Mylonite texture, crenulation cleavage and minor shear zone are common. The meta-sedimentary rocks include various rock-fragments xenoliths in size (up to 3 cm) and rock-type. They have various porphyroblastic spots in size (up to 1 cm) and their mineral composition is different. The xenoliths are schists, granite and quartzite, which are rectangular or lens form and recrystallized muscovite, chlorite and quartz. Spots are andalusite and biotite aggregates extensively replaced by chlorite. The metamorphic terrain is divided into three zones of progressive metamorphism on the basis of mineral assemblage. They are chlorite zone, chloite-biotite zone and andalusite-biotite zone ascending order, from west to east approximately. Isograd reactions are phengitic muscovite + chlorite = less phengitic muscovite + biotite + quartz + $H_2O$ and muscovite + chlorite + quartz = andalusite + biotite + $H_2O$ between the chlorite zone and chlorite-biotite zone, and between the chloritebiotite zone and andalusite-biotite zone, respectively. Sample B6 (exposed near the Obong-ri) includes staurolites and greenish biotites, that is different in mineral assemblage and chemical composition from the meta-sedimentary rocks. Sample A12 (exposed near the Shinam-ri) has greenish white spots (up to 1 cm in diameter) mainly composed of Kfeldspar, quartz and sillimanite replaced by muscovite.

• Economic and Environmental Geology
• /
• v.40 no.6
• /
• pp.771-784
• /
• 2007

This study shows the weathering characteristics of mica-schist affected by faulting and metamorphism through laboratory tests. Frozen-thaw test, which simulate the physical-chemical weathering processes in the laboratory, shows the important influence of foliation developed in mica-schist, resulting in $20{\sim}40%$ reduction of UCS according to weathering grade of rock. Slaking durability test was carried out for different weathering grade rock specimens and indicated that the specimens from fault area had a low durability index compared to other relatively fresh samples. XRD analysis allowed to estimate the dynamic evolution of mineral composition through wet-dry cycle in which the chlorite was the most important mineral leached out during slaking test. The creep test indicated that the main deformation produced along the foliation plane. The compacted clay minerals between discontinuity planes influence on the discontinuity shearing properties and result in a big difference between peak shear strength and residual strength. The results of laboratory tests on mica-schist show the possibility of a important deformation along the foliation plane or discontinuity.

• Economic and Environmental Geology
• /
• v.32 no.5
• /
• pp.519-535
• /
• 1999

Precambrian metasedimetay rocks in the Sunchang Shear Zone (so-called Seologri and Yongamsan Formation) consist of black slate, phylite, mica schistm quartzite and rarely calc schist. The metamorphic rocks in the area have undergone at least three stages of metamorphism, which are two prograde (M1 and M2) and one contact metamorphism (M3). The metamorphism which made the most prevailing mineral assemblages in the area, is M2 stage metamorphism. The metamorphic grade of M2 methamorphism in metapelites increases from the Chlorite zone through Biotituzone, Garnet zone to Staurolite zone. The M1 stage metamorphism is recognized by kyanite and sillimanite pressure type regional metamorphism. The M3 stage methamorphism is represented in the contact boundary, which area is the chlorite zone and biotite zone near the Sunchang foliated granite and the namwon granite. The M3 stage methamorphism is characterized by andalusite bearing mineral assemblages. The peak temperature condition of M2 metamorphism estimated from coexising garnet and biotite (Kretz, 1990) is 518~598$^{\circ}C$.

• Journal of the Mineralogical Society of Korea
• /
• v.16 no.3
• /
• pp.255-263
• /
• 2003

Margarite, occurring in an Unkyori Formation of Miwon area, Chungcheongbukdo, South Korea, was investigated using a high-resolution transmission electron microscope (HRTEM) to reveal the microstructural intergrowth textures of margarite. HRTEM images of margarite, which was previously confirmed to have intergrowth textures by petrographic microscope and back-scattered electron images, show that chlorite occurs as thin packets of layers interlayered within margarite crystals, and intercalated chlorite layers are intergrown irregularly in areas as a few hundred angstroms thick slabs or isolated chlorite unit layers. Margarite crystals observed by HRTEM consist of a well-ordered 2M polytype, and electron diffraction pattern shows no prominent streaking along the 001 (or $c^{*}$) direction, indicating that there is no significant stacking disorder in margarite. Intercalated extra brucite-like layers, which are approximately 5 $\AA$ thick, are observed locally within margarite crystals. Insertion of such extra brucite-like layer at the interlayer of margarite would result in a chlorite-like structure unit. (001) margarite layers are parallel to (001) of chlorite, and margarite layers are not extended from (001) of chlorite, indicating that margarite was apparently produced through a dissolution-precipitation mechanism.m.

• The Journal of the Petrological Society of Korea
• /
• v.3 no.2
• /
• pp.156-170
• /
• 1994

The talc ore deposits can be divided into chloritic and dolomitic ores according to mineral assemblages. The former is mainly composed of chlorite and talc accompanied with dolomite, muscovite and opaque mineral, and the latter of dolomite and talc with serpentine, calcite and magnesite in places. Talc was originated from chlorite and serpentine. Carbonate minerals were formed either directly from the introduced hydrothermal solution or secondarily as a by-product of steatitization of chlorite and serpentine. The process of talc formation may be governed by the chemical composition of the host rocks and the amount and/or chemical composition of the hydrothermal solution which may be different in places. However, the representative reactions producing talc from chlorite and serpentine are as follows : (1) chlorite+$Mg^{++}+Si^{4+}+H_2O$=talc, (2) chlorite+$Mg^{++}+Si^{4+}+Ca^{++}+CO_2+O_2+H_2O$=talc+ dolomite+ magnesite, and (3) serpentine +$Mg^{++}+Fe^{++}+Si^{4+}+Ca^{++}+CO_2+H_2O$=talc+dolomite. The reactions indicate that the carbonate minerals can be formed when the hydrothermal solution have high $fO_2$ and $fCO_2$. The steatitization might be proceeded by the hydrothermally metasomatic reaction between chlorite schist or chlorite gneiss intercalated in the granitic gneiss and hydrothermal solution accompanied to the wet granitization.

• Economic and Environmental Geology
• /
• v.24 no.4
• /
• pp.363-378
• /
• 1991

Field and microscopic evidence, XRD,EPMA and chemical data suggest that parent rock of talc ore deposits of Yesan district was originated from ultramafic igneous rock. Parent rock can be divided into serpentinized dunite, serpentinized peridotite, metagabbro, amphibolite and hornblende schist. The ore deposits are highly sheared, and show many evidences of hydrothermal alteration and metamorphism at the greenschist and albite-epidote amphibolite facies. The process of steatitization is variable depending upon the composition, and the degree of alteration and metamorphism of the parent rocks. Steatitization can be divided into two processes with or without serpentinization. The parent rocks with serpentinization are serpentinized dunite, serpentinized peridotite and metagabbro, showing the following alteration process; olivine ${\rightarrow}$ serpentine${\rightarrow}$ talc. The rocks without serpentinization are amphibolite and hornblende schist showing the following sequence; hornblende${\rightarrow}$ chlorite${\rightarrow}$ talc. Formation of talc deposits is summarized as following six stages; I) Intrusion of ultramafic rocks, 2) autometamorphism, 3) metamorphism at greenschist and albite-epidote-amphibolite facies, 4) brittle deformation, 5) hydrothermal alteration, 6) purification of low-grade talc by late dyke intrusion.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.2 s.48
• /
• pp.47-58
• /
• 2007

This study examines the distribution of basement rocks in Gyochon-ri, Muan-eup, Muan-gun, Jeonnam where ground subsidence occurred in June 2005, and traces corrosion of limestone. Mica schist and rhyolite are distributed in the surface of the study area, but thick limestone layer with large and small caverns are distributed underground. A horizon of limestone with maximum width of 300 m and 4 km of length was found along the detour which is in the north of pound subsidence. Such identification of limestone presence would be very useful to predict potential ground subsidence. Limestone in this area was disturbed by fold and fault due to severe shearing deformation. Small caverns were frequently found in anticline part of folds formed in limestone layer. Schists with different thicknesses were intercalated in the limestone with shearing deformation and consist of sheet silicate minerals (chlorite and mica) and quartz. In sections of weathered specimen, it is shown that biotite of schist part was altered into chlorite and corrosion of calcite around the schist followed. This suggest that ground water permeated between intercalated sheet silicate minerals and corrosion of limestone began. And small caverns were generated where active corrosion occurred. This study suggests that because of many reasons (for instance, reclamation of the Bulmu reservior and excess pumping), cavern water level was lowered and cave sediments were removed, and it caused ground subsidence to occur.

• Economic and Environmental Geology
• /
• v.3 no.4
• /
• pp.199-222
• /
• 1970

One of the biggest sulfide metallic (Cu, Pb, Zn) ore deposits of South Korea is located in the area of Seo-myeon, Shiheung-gun, Gyeonggi-do. Geology of the region is mostly composed of metasediments of biotite schist, graphite schist, injection gneiss, sericite schist, limesilicate and quartzite from bottom, those are applicable to so-called Yeoncheon System of Pre-Cambrian, and granodiorite, quartz porphyry, basic dykes are outcroped in a small scope as intrusives. The origin of the ore deposit is pyrometasomatic contact deposits due to hydrothermal replacement and the ore bodies are imbedded in lower bed of limesilicate formation as impregnation and ore minerals are galena, sphalerite, marmatite, chalcopyrite, bornite, chalcocite, covellite, and the later two minerals are both hypogene and supergene. Gangue minerals are mostly skarn minerals those hornblende, diopside, epidote, hedenbergite, chlorite, garnet and quartz except primary calcite and quartz. Boundary plane (NS strike) between schists and limesilicate seemed to be primary opening of ore solution and fractures bearing $N50^{\circ}{\sim}80^{\circ}W$ are secondary structural control for localization of ore minerals and the third structural controls are both irregular gashes and schistosity in small scale. Photogeological study was carried with vertical aerial photo scaled 1: 38,000 and enlarged 1 : 10,000 under stereoscope. The study on the area convinced the fact that the geologic boundaries between rocks, limesilicates and quartzites, are traced easily by their typical topographic feature and drainage, and the main fracture patterns which derived from the result of fracture traces, that photogeologic lineament observed under stereoscope, are those bearing (1) $N20^{\circ}W$, (2) $N58^{\circ}W$, (3) $N76^{\circ}W$, (4) EW, (5) $N20^{\circ}W$, (6) $N62^{\circ}W$, (7) $N77^{\circ}W$. Among the written fractures, (5) (not schistosity, in case of fault) (6) (7) are post-mineral faults and others are pre-mineral faults and others are pre-mineral structures, and (2) (3) (6) (7) are coincided with statistical figure of 208 fractures surveyed in underground. By the result of the study, mineralized zone, are presumed to extend north and southward, total length about 4km.

• Economic and Environmental Geology
• /
• v.30 no.6
• /
• pp.531-541
• /
• 1997

Unconsolidated sediments of Youngjong Island were investigated to consider the vertical distribution of clay minerals and their origin. At least three sedimentation units can be recognized by color, magnetic susceptibility, and pH. X-ray diffraction analysis of clay size fraction reveals that illite is the most abundant phase (52.06%), and chlorite (27.16%), kaolinite (16.92%), smectite (3.86%) occur next to it. Detailed XRD study suggests that illitic materials contain fairly large amount of ordinary muscovite derived from the mica schist in Youngjong Island and adjacent area. The relative amount of kaolinite and chlorite is less than those of samples from estuary mouth of several rivers that flow to Yellow Sea and South Sea. Especially smectite content of the present sample is much higher than those of estuary sediments. These indicate that the unconsolidated sediments of tidal-flat deposit in Youngjong Island are largely affected by marine influence and partly affected by sediment in influx from China. However, some degree of source of this unconsolidated sediments is inland origin from adjacent estuary sediment and in situ or nearby weathered materials.