• Computers and Concrete
• /
• 제15권4호
• /
• pp.589-606
• /
• 2015

It is well-documented that the major deterioration of coastal RC structures is chloride-induced corrosion. Therefore, regional investigations are necessary for durability based design and evaluation of the proposed service life prdiction models. In this paper, four reinforced concrete jetties exposed to severe marine environment were monitored to assess the long term chloride penetration at 6 months to 96 months. Also, some accelerated durability tests were performed on standard samples in laboratory. As a result, two time-dependent equations are proposed for basic parameters of chloride diffusion into concrete and then the corrosion initiation time is estimated by a developed probabilistic service life model Also, two famous service life prediction models are compared using chloride profiles obtained from structures after about 40 years in the tidal exposure conditions. The results confirm that the influence of concrete quality on diffusion coefficients is related to the concrete pore structure and the time dependence is due to chemical reactions of sea water ions with hydration products which lead a reduction in pore structure. Also, proper attention to the durability properties of concrete may extend the service life of marine structures greater than fifty years, even in harsh environments.

• 콘크리트학회논문집
• /
• 제17권4호
• /
• pp.663-670
• /
• 2005

The present study concerns the influence of binder type on the chloride-induced corrosion being accompanied by the chloride threshold level (CTL), chloride transport and as their results the corrosion-free lift. Two levels of cement content, $30\%$ PFA and $65\%$ GGBS concrete were employed. It was found that the most dominant factor to the CTL is the entrapped air void content at the steel-concrete interface, irrespective of the chloride binding capacity, binder type and acid neutralisation capacity of cement matrix. The CTL for lower interfacial air void contents was significantly increased up to $1.52\%$ by weight of cement, whereas a same mix produced $0.35\%$ for a higher level of voids. Because of a remarkable reduction in the diffusion fur GGBS concrete, its time to corrosion ranges from 255 to 1,250 days, while the corrosion-free life for control varies from 20 to 199 days sand for $30\%$ PFA concrete from 200 to 331 days.

• Computers and Concrete
• /
• 제20권2호
• /
• pp.185-196
• /
• 2017

Durability problems initiated from steel corrosion are unseen but critical issues, so that many researches are focused on chloride penetration evaluation. Even if RC (Reinforced Concrete) structures are exposed to normal environment, chloride ingress varies with concrete surface conditions and exposed period. This paper presents an analysis technique for chloride behavior evaluation considering time effect on diffusion and surface conditions assumed as double-layered system. For evaluation of deteriorated surface condition, field investigation was performed for concrete pavement exposed to deicing agent for 18 years. In order to consider enhanced surface concrete, chloride profiles in surface-impregnated concretes exposed to chloride attack for 2 years from previous research were investigated. Through reverse analysis, effectively deteriorated/enhanced depth of surface and the related reduced/enlarged diffusion coefficient in the depth are simulated. The proposed analysis technique was evaluated to handle the chloride behavior more accurately considering changes of chloride ingress within surface layer and decreased diffusion coefficient with time. For the concrete surface exposed to deicing agent, the deteriorated depth and enlarged diffusion coefficient are evaluated to be 12.5~15.0 mm and 200% increasing diffusion coefficient, respectively. The results in concrete containing enhanced cover show 10.0~12.5 mm of impregnated depth and 85% reduction of chloride diffusion in tidal and submerged conditions.

• 한국자동차공학회논문집
• /
• 제23권2호
• /
• pp.199-207
• /
• 2015

Solid materials of ammonia sources with SCR have been considered for the application of lean NOx reduction in automobile industry, to overcome complex problems of liquid urea based SCR. These solid materials produce ammonia gas directly with proper heating and can be packaged by compact size, because of high volumetric ammonia density. Among ammonium salts and metal ammine chlorides, calcium ammine chloride was focused on this paper due to low decomposition temperature. In order to make calcium ammine chloride in lab-scale, simple reactor and glove box was designed and built with ammonium gas tank, regulator, and sensors. Basic test conditions of charging ammonia gas to anhydrous calcium chloride are chosen from equilibrium vapor pressure by Van't Hoff plot based on thermodynamic properties of materials. Synthetic method of calcium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%) from simple weight calculations which were confirmed by IC. Also, lab-made calcium ammine chloride were analyzed by TGA and DSC to clarify decomposition step in the equations of chemical reaction. To understand material characteristics for lab-made calcium ammine chloride, DA, XRD and FT-IR analysis were performed with published data of literature. From analytical results, water content in lab-made calcium ammine chloride can be discovered and new test procedures of water removal were proposed.

• 한국재료학회지
• /
• 제10권6호
• /
• pp.385-391
• /
• 2000

염화철(Ferrous Choloride) 증기의 고온 수소환원 반응을 통한 미립질 철분말의 생성속도에 대한 이론적인 해석돠 실험을 수행하였다. 철분말의 생성기구는 염화철이 증발하여 생성된 증기와 운반가스인 알곤을 혼합하여 반응부로 유입시키고 수소에 의한 고온환원반을을 통하여 철분말과 함께 부산물인 염화수소(HCI) 가스를 얻게 된다. 생성된 반응부 후미에 설치한 유기용매 포집기를 이용하여 회수하였으며, 염화수소는 가성소다 수용액에 흡수시키고 이를 적정함으로써 초기 반응물인 염화철의 전환율을 계산하였다. 반응속도식의 반응물에 대하여 1차반응(1st-order reaction)이고 염화철 증가와 운반체인 알곤가스가 평형상태일 때의 속도상수는 $k=7,879exp(-53,840/RT)\textrm{dm}^3/mole.sec$으로 표시되며, 이때의 활성화에너지는 53.84kJ/mole이었다. 철분말의 TEM 사진에 의하면 입도범위는 $0.1~1.0{\mu\textrm{m}}$이며, 반응온도 및 가스유량에는 크게 영향을 받지 않는것으로 나타났다.

• 한국환경보건학회지
• /
• 제28권5호
• /
• pp.86-92
• /
• 2002

This study was performed to assets the operating characteristics of food waste composting and co-composting (food waste + sewage sludge) at a compelling facility. The facility was being operated successfully without being affected by kind of composting feed materials. Partial anaerobic condition was detected during food waste composting and co-com-posting, but these two composting systems were proven to be operated successfully under aerobic condition from the monitoring results of $O_2$, volatile solids reduction rate, temperature, and other parameters. The conductivity and chloride concentrations of compost were gradually increased during two composting periods, but the conductivity and chloride concentrations of co-compelling indicated lower values than those of food waste composting at final point(40 m). As a result, co-composting was turned out to be more desirable than food waste composting, considering salt problem. High correlations ($R^2$= 0.9265 for food waste composting and $R^2$= 0.9685 for co-composting) between CEC and volatile organic matter were found. Quality of composts produced from two composting process satisfied Korean heavy metal standard.

• 대한화학회지
• /
• 제37권8호
• /
• pp.744-752
• /
• 1993

거대고리화합물의 유도체들은 촉매로 사용하여 유리질 탄소전극과 탄소 미소전극에서 SOCl$_2$의 전기화학적 환원반응을 조사하였다. 이들 유도체들은 먼저 전극표면에 흡착된 후 SOCl$_2$를 환원시켰다. 전해질 용액에 전극이 담기는 시간과 촉매들의 농도의 변화는 SOCl$_2$의 환원에 크게 영향을 미쳤다. 유리질 탄소 전극에서 촉매효과에 의한 속도상수는 10배 증가하였고, Power 밀도는 최고 220% 까지 증가하였다. 탄소 미소전극을 사용하여 시간전류법에 의해 얻은 확산계수는 유리질 탄소전극을 사용하여 순환전압전류법에 의해 얻은 결과와 다소 다른 값으로 나타났다.

• Journal of Applied Biological Chemistry
• /
• 제61권4호
• /
• pp.383-389
• /
• 2018

Degradation of the insecticide O,O-diethyl O-3,5,6-trichloro-2-pyridyl phosphorothioate (chlorpyrifos) in aqueous solution was investigated using iron salts and potassium persulfate during ZVI treatment through a series of batch experiments. The degradation rate of chlorpyrifos increased with increases in the concentrations of iron salts and potassium persulfate in the aqueous system. Ferric chloride was found to be the most effective iron salt for the ZVI-mediated degradation of chlorpyrifos in aqueous solution. Further, the iron salts tested could be arranged in the following order in terms of their effectiveness: $FeCl_3$> $Fe_2(SO_4)_3$> $Fe(NO_3)_3$. The persulfate-ZVI system could significantly degrade chlorpyrifos present in the aqueous medium. This revealed that chlorpyrifos degradation by treatment with $Fe^0$ was promoted on adding ferric chloride and potassium persulfate. The kinetics of the degradation of chlorpyrifos by persulfate-amended $Fe^0$ was higher than that for iron-salt-amended $Fe^0$. This suggests that using a sequential $Fe^0$ reduction-ferric chloride or $Fe^0$ reduction-persulfate process may be an effective strategy to enhance the removal of chlorpyrifos in contaminated water.

• 대한기계학회논문집B
• /
• 제39권11호
• /
• pp.843-851
• /
• 2015

질소산화물 저감에 사용하는 solid SCR용 고체상 암모늄 저장물질의 하나인 magnesium ammine chloride에 대한 실험실 규모에서의 제조방법과 제조한 물질의 분석연구를 수행하였다. 기저물질인 염화마그네슘에 암모니아 가스를 흡착하기 위한 실험조건의 도출을 위하여, Van't Hoff Plot으로 평형압 선도를 계산하였고, 간이반응기를 제작한 후, magnesium ammine chloride를 제조하였다. DA, IC, FT-IR, XRD, SDT 등으로 제조한 시료의 성분을 분석하였고, 제조한 시료에 수분이 존재한다는 것을 알 수 있었다. 암모니아 가스 흡착률을 증대하기 위하여 수분 제거에 적절한 새로운 실험방법을 제안하였고, 제안한 방법을 적용한 결과, 암모니아 가스의 흡착률이 대략 100%에 도달하였다.

• Journal of Ginseng Research
• /
• 제30권3호
• /
• pp.106-111
• /
• 2006

Adverse changes in individual's biochemistry under heavy metal stress are directly linked with its metabolic activity and health status. The present investigation highlights the differences in protecting role of Panax ginseng extract against mercuric chloride induced alterations in serum proteins. The assessment was based on dividing fifty albino rats into two sets, one for acute and the other for sub-acute study. All the sets had five groups with five albino rats in each i.e. control group, mercuric chloride treated group, Panax ginseng extract treated group, mercuric chloride followed by Panax ginseng extract treated group and Panax ginseng extract followed by mercuric chloride treated group. Mercuric chloride was given orally 0.926 mg/kg body weight for acute set and 0.044 mg/kg body weight for sub-acute set after LD50 (9.26 mg/kg body weight) determination by probitt analysis. 10 mg/kg body weight Panax ginseng extract was given in both acute and sub-acute sets after incorporating safety trials. The control group received tween-20 and distilled water only. The result exhibited significantly reduction (P<0.01) in serum protein, albumin and globulin following mercuric chloride intoxication whereas significant (P<0.01) enhancement in other groups with Panax ginseng extract as an ingredient confirming its protective role. All serum samples were also electrophoresed in 10% SDS with standard marker using discontinuous buffering system. Gradual disappearance of alpha-2 and beta-1 globulin bands from electrophoretic pattern was observed, while a single sharp band was observed between beta-2 and gamma globulin in serum protein pattern of acutely mercuric chloride treated rats. However, this band could not be visualized in sub-acute studies. Panax ginseng extract exhibits a better protection after acute intoxication.