• Journal of Life Science
• /
• v.16 no.4
• /
• pp.598-604
• /
• 2006

The $Ca^{2+}-activated$ neutral protease calpain induced proteolysis has been suggested to play a role in certain cell growth regulatory proteins. Cyclin proteolysis is essential for cell cycle progression. D-type cyclins, which form an assembly with cyclin-dependent kinases (cdk4 and cdk6), are synthesized earlier in G1 of the cell cycle and seem to be induced in response to external signals that promote entry into the cell cycle. Here we show that cyclin D3 protein levels are regulated at the posttranscriptional level by calpain protease. Treatment of human breast carcinoma MDA-MB-231 cells with lovastatin and actinomycin D resulted in a loss of cyclin D3 protein that was completely reversible by the peptide aldehyde calpain inhibitor, LLnL. The specific inhibitor of the 26S proteasome, lactacystin, the lysosome inhibitors, ammonium chloride and chloroquine, and the serine protease inhibitor, phenylmethylsulfonylfluoride (PMSF), did not block the degradation of cyclin D3 by lovastatin and actinomycin D. Results of in vitro degradation of cyclin D3 by purified calpain showed that cyclin D3 protein is degraded in a $Ca^{2+}-dependent$ manner, and the half-life of cyclin D3 protein was dramatically increased in LLnL treated cells. These data suggested that cyclin D3 protein is regulated by the $Ca^{2+}-activated$ protease calpain.

• Clean Technology
• /
• v.24 no.4
• /
• pp.339-347
• /
• 2018

In order to cope with environmental problems and climate change caused by fossil fuels, renewable energy supply is increasing year by year. Currently, waste energy accounts for 60% of renewable energy production. However, waste has a lower calorific value than fossil fuels and contains various harmful substances, which causes serious problems when applied to power generation boilers. In particular, the chlorine in the waste fuel increases slagging and fouling of boiler heat exchangers, leading to a reduction in thermal efficiency and the main cause of high temperature corrosion, lowering facility operation rate and increasing operating cost. In this study, the high temperature corrosion experiments of superheater materials (ASME SA213/ASTM A213 T2, T12 and T22 alloy steel) by alkali chlorides were conducted, and their corrosion characteristics were analyzed by the weight loss method and SEM-EDS. Experiments show that the higher the temperature and chloride content, the more corrosion occurs, and KCl further corrodes the materials compared to NaCl under the same condition. In addition, the higher the chromium content of the material, the better the corrosion resistance to the alkali chlorides.

• Macromolecular Research
• /
• v.8 no.1
• /
• pp.44-52
• /
• 2000

Styrenic macromonomers with/without a silyloxy-functional group were synthesizedvia chain-end functionalization using 4-vinylbenzyl chloride as a terminating agent insec-butyllithium-initiated polymerization of styrene. The yields were 92 mol% for the silyloxy group and 88 mol% for the styrenic unit. Crystalline polystyrene-g-amorphous polystyrenes were synthesized by (η$^{5}$ -indenyl)-trichlorotitanium ((Ind)TiCl$_3$)-catalyzed copolymerizations of the macromonomers with styrene in the presence of methyl-aluminoxane (MAO) in toluene at 4$0^{\circ}C$. The macromonomer having $\alpha$, $\alpha$'-bis (4-[tert-butyldimethylsilyl-oxy]phenyl) group was also utilized for the preparation of a precursor of hydroxyl-functionalized syndio-tactic polystyrene. The obtained polymers were characterized by a combination of$^1$H, $^{13}$ C NMR spectroscopic, size exclusion chromatographic, and differential scanning calorimetric analysis. The (Ind)TiCl$_3$-catalyzed copolymerization of styrene with the macromonomer carrying the silyloxy functional group was found to be an efficient method to modify syndiotactic polystyrene without a great loss of physica] property by controlling the feud ratio of the macromonomer.

• Journal of Welding and Joining
• /
• v.32 no.4
• /
• pp.26-33
• /
• 2014

The metallurgical and mechanical characteristics, toughness and corrosion resistance of dissimilar welds between super duplex stainless steel UNS S32750 and carbon steel ASTM A516Gr.70 have been evaluated. Three heat inputs of 21.12, 24.00, 26.88kJ/cm were employed to make joints of dissimilar metals with flux cored arc welding(FCAW). Based on microstructural examination, vermicular ferrite was formed in the first layer of weld at low heat input(21.12kJ/cm) and $Cr_{eq}/Ni_{eq}$ of 1.61 while acicular ferrite was formed in last layer of weld at high heat input(26.88kJ/cm) and $Cr_{eq}/Ni_{eq}$ of 1.72. Ferrite percentage in dissimilar welds was lowest in the first layer of weld regardless of heat inputs and it gradually increased in the second and third layers of weld. Heat affected zone showed higher hardness than the weld metal although reheated zone showed lower hardness than weld metal due to the formation of secondary austenite. Tensile strengths of dissimilar welds increased with heat input and there was 100MPa difference. The corrosion test by ferric chloride solution showed that carbon steel had poor corrosion resistance and pitting corrosion occurred in the first layer(root pass) of weld due to the presence of reheated zone where secondary austenite was formed. The salt spray test of carbon steel showed that the surface only corroded but the amount of weight loss was extremely low.

• Mycobiology
• /
• v.42 no.1
• /
• pp.59-65
• /
• 2014

Entomopathogenic fungi are promising pest-control agents but their industrial applicability is limited by their thermosusceptibility. With an aim to increase the thermotolerance of Isaria fumosorosea SFP-198, moisture absorbents were added to dried conidial powder, and the relationship between its water potential and thermotolerance was investigated. Mycotized rice grains were dried at $10^{\circ}C$, $20^{\circ}C$, $30^{\circ}C$, and $40^{\circ}C$ and the drying effect of each temperature for 24, 48, 96, and 140 hr was determined. Drying for 48 hr at $10^{\circ}C$ and $20^{\circ}C$ reduced the moisture content to < 5% without any significant loss of conidial thermotolerance, but drying at $30^{\circ}C$ and $40^{\circ}C$ reduced both moisture content and conidial thermotolerance. To maintain thermotolerance during storage, moisture absorbents, such as calcium chloride, silica gel, magnesium sulfate, white carbon, and sodium sulfate were individually added to previously dried-conidial powder at 10% (w/w). These mixtures was then stored at room temperature for 30 days and subjected to $50^{\circ}C$ for 2 hr. The white carbon mixture had the highest conidial thermotolerance, followed by silica gel, magnesium sulfate, and then the other absorbents. A significant correlation between the water potential and conidial thermotolerance was observed in all conidia-absorbent mixtures tested in this study (r = -0.945). Conidial thermotolerance in wet conditions was evaluated by adding moisturized white carbon (0~20% $H_2O$) to conidia to mimic wet conditions. Notably, the conidia still maintained their thermotolerance under these conditions. Thus, it is evident that conidial thermotolerance can be maintained by drying mycotized rice grains at low temperatures and adding a moisture absorbent, such as white carbon.

• Journal of Environmental Health Sciences
• /
• v.37 no.6
• /
• pp.482-487
• /
• 2011

Salmonellosis and brucellosis have caused a considerable danger of farmed animals and economic loss in animal farming industry. In this study, the disinfection efficacy of Citra-Kill$^{(R)}$, a commercial disinfectant, composed to quaternary ammonium chloride and citric acid was evaluated against S. typhimurium and Brucella ovis. A bactericidal efficacy test by broth dilution method was used to determine the lowest effective dilution of the disinfectant following exposure to test bacteria for 30 min at $4^{\circ}C$. Citra-Kill$^{(R)}$ and test bacteria were diluted with distilled water (DW), hard water (HW) or organic matter suspension (OM) according to treatment condition. On OM condition, the bactericidal activity of Citra-Kill$^{(R)}$ against S. typhimurium and Brucella ovis was lowered compared to that on HW condition. As Citra-Kill$^{(R)}$ possesses bactericidal efficacy against animal pathogenic bacteria such as S. typhimurium and Brucella ovis, this disinfectant solution can be used to control the spread of animal bacterial diseases.

• YAKHAK HOEJI
• /
• v.52 no.1
• /
• pp.20-26
• /
• 2008

2-Aminothiazole ring as a bioisoster of catechol in dopamine has provided with good oral availability and lipophilic property. Selenium was reported to have an improved antioxidant ability and to reduce the loss of dopamine. 2-Aminoindan, is a rigid form of dopamine, was evaluated as a dopamine agonist with low neurotoxocity. In order to develop a novel dopamine agonist, we tried to synthesize the selenazoloaminoindan derivative that is a hybrid structure of aminoindan and aminoselenazole instead of aminothiazole. 2-Indanone-2-oxime was reduced with $TiCl_4$ and $NaBH_4$ to form 2-aminoindan, which was reacted with propionyl chloride to give 2-N-n-propionylaminoindan (2). Compound 2 was reduced with $TiCl_4$ and $NaBH_4$ to afford 2-N-n-propylaminoindan (3) and it was nitrated and reduced to form 5-amino-2-N-n-propylaminoindan (5), which was reacted with KSeCN, $Br_2$, and glacial acetic acid to give 4,6-dibromo-5- amino-2-N-n-propylaminoindan (7) instead of selenazole ring formation. Otherwise, compound 2 was nitrated and hydrogenated to form 5-amino-2-N-n-propionylaminoindan (9), which was treated with KSeCN, $Br_2$, and glacial acetic acid to give 4,6-dibromo-5-amino-2-N-n-propionylaminoindan (10). Compound 9 was cyc1ized with KSeCN and glacial acetic acid in the absence of $Br_2$ to give 6-amino-2-N-(n-propionylamino)selenazolo[4,5-f]indan (11).

• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.1-11
• /
• 2015

PURPOSES : This study set out to investigate the fundamental properties of alkali-activated concrete (AAC) using modified slag as the pavement maintenance material. METHODS: The material properties of modified slag based alkali-activated concrete (MSAAC) were analyzed and evaluated against those of alkali-activated slag concrete (AASC). Several mix formulations were considered, including one MSACC and four AASCs. The main variables considered in the study were slump, air content, compressive strength, rapid chloride permeability test, scaling resistance, freeze-thaw test, XRD, SEM, and EDS. RESULTS: MSAAC exhibits a compressive strength in excess of 21 MPa six hours after curing. Also, the charge passed of the MSACC was found to be less than 2000 coulombs after seven days and about 1000 coulombs after 28 days. The weight loss determined from a scaling test did not exceed $1kg/cm^2$ in the case of the MSACC, but that of the AASCs had already exceeded $1kg/cm^2$ at the 10th cycle. Based on the results of the freeze-thaw test, the relative dynamic modulus of every mix was found to be in excess of 90%. An energy dispersive spectroscopy(EDS) analysis found that the weight rate percentage of the calcium and aluminum in the MSAAC mix is twice that of the AASC mixes. CONCLUSIONS : It was found that the MSAAC mix exhibits significantly better performance than AASC mixes, based on various fundamental properties.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.173-180
• /
• 2013

This paper is to investigate an effect of waste cooking oil(WCO) on the engineering properties and durability of high volume admixture concrete. Fly ash with 30% and blast furnace slag with 60% were incorporated in OPC to fabricate high volume admixture concrete with 0.5 of W/B. Emulsified refining cooking oil(ERCO) was made by mixing WCO and emulsifying agent to improve fluidity. ERCO was replaced by cement from 0.25 to 1.0%. As results, the increase of ERCO resulted in decrease of slump and air contents. For compressive strength, the use of ERCO led to decrease the compressive strength at 28 days, while it had similar strength or much higher strength than plain concrete at 180 days. Resistance to carbonation and chloride penetration was improved with the increase of ERCO contents due to decreased pore distribution by saponification between ERCO and concrete, while freeze-thaw resistance was degraded due to air loss.

• Preventive Nutrition and Food Science
• /
• v.16 no.1
• /
• pp.18-23
• /
• 2011

Alzheimer's disease (AD) is a neurodegenerative disorder characterized by neuronal loss and extracellular senile plaques containing $\beta$-amyloid peptide (A$\beta$). The deposition of the A$\beta$ peptide following proteolytic processing of amyloid precursor protein (APP) by $\beta$-secretase (BACE1) and $\gamma$-secretase is a critical feature in the progression of AD. Among the plant extracts tested, the ethanol extract of Petasites japonicus leaves showed novel protective effect on B103 neuroblastoma cells against neurotoxicity induced by A$\beta$, as well as a strong suppressive effect on BACE1 activity. Ethanol extracts of P. japonicus leaves were sequentially extracted with methylene chloride, ethyl acetate and butanol and evaluated for potential to inhibit BACE1, as well as to suppress A$\beta$-induced neurotoxicity. Exposure to A$\beta$ significantly reduced cell viability and increased apoptotic cell death. However, pretreatment with ethyl acetate fraction of P. japonicus leaves prior to A$\beta$ (50 ${\mu}M$) significantly increased cell viability (p<0.01). In parallel, cell apoptosis triggered by A$\beta$ was also dramatically inhibited by ethyl acetate fraction of P. japonicus leaves. Moreover, the ethyl acetate fraction suppressed caspase-3 activity to the basal level at 30 ppm. Taken together, these results demonstrated that P. japonicus leaves appear to be a useful source for the inhibition and/or prevention of AD by suppression of BACE1 activity and attenuation of A$\beta$ induced neurocytotoxicity.