• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.882-889
• /
• 2008

Three fabrics, 100% silk, nylon and cotton each, were dyed with a lichen dye solution prepared by a fermentation method under conditions of varying dyebath pH and temperature. To verify the effect of chitosan on fabric dyeing, the 100% cotton fabric was treated with a chitosan solution before dyeing. The K/S, CIE $L^*$, $a^*$, $b^*$, ${\Delta}E$ and Munsell values of the dyed samples were measured. Colorfastness of each sample was also investigated. The maximum K/S value was measured at 520nm wavelength for the dyed silk fabric and at 480nm for the dyed cotton and nylon. The K/S values for the dyed silk fabric were much greater than those of the other fabrics. The dyed silk fabric showed a red tone on the Munsell color system, and the dyed nylon and cotton fabrics a yellowish red tone. Dye affinity to fabrics was better in a neutral or acidic dyebath. As dyeing temperature increased, K/S values increased for the dyed nylon and cotton fabrics but not for the silk. Dyeability of cotton fabrics could improve by Chitosan treatment. As for most natural dyes, colorfastness of all dyed samples was poor. The silk fabric showed an excellent dry cleaning fastness of Grade 5.

• Journal of the Korean Chemical Society
• /
• v.45 no.4
• /
• pp.334-340
• /
• 2001

The water soluble carboxymethyl-chitin (CM-chitin) has been well known to be very useful to the cosmetic field as a moisturizer, a smoothener, a cell activater and a cleaner for face skin conditioning. In this study, the preparation process of CM-chitin was simplified with elimination of some procedures in the conventional method. The chitin powder was mixed with sodium hydroxide solution. And then a mixture of sodium monochloroacetate (or monochloroacetic acid) and isopropyl alcohol (or a mixed solution with water and isopropyl alcohol) was added to thorough the agitation and the freezing during 16 hours. The CM-chitin with a high degree of substitution by the improved process was obtained.

• Membrane Journal
• /
• v.11 no.1
• /
• pp.22-28
• /
• 2001

Various charged homogeneous membranes were fabricated by blending of ionic polymer with a non-ionic polymer with different ratios. In this study. sodium alginate, chitosan and poly(vinyl alcohol) were employed as anionic. cationic and non-ionic polymers, respectively. The permcation and separation behaviors of aquCOll::; salt solutions have been investigated through the charged membranes. As the content of ionic polymer increases in the membrane, the hydrophilicity of the membrane increases and pure water flux as well as solution flux increases correspondingly, indicating that the permeation performance through the membrane is cletemunecl mainly by its hydrophilicity-, Electrostatic interaction between the charged membrane and ionic solute molecules, that is. Donnan exclusion was observed to be attributed to salt rejection to a great deal of extent, and molecular sieve mechanism was effective [or the separation of the salt solution under a similar electrostatic circumstance of solutes.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.91-94
• /
• 2003

In this work, the physicochemical properties for permeant molecules and polyion complex membrane prepared by complexation between SA and chitosan were determined by using molecular modeling methods, and the permeation behaviors of water and alcohol molecules through the PIC membrane have been investigated. In the case of penetrant molecule, the experimental results showed that the prepared membrane was excellent pervaporation performance result in most solution, and the selectivity and permeability of the membrane were dependent on the molecular size, the polarity and the hydrophilic surface of permeant organics. However, the separation behavior of methanol aqueous solution exhibited other permeation tendency with other feed solutions and contradictory result. That is, the membrane were preferentially permeable to methanol over water despite water molecule has stronger polarity and small molecular size than methanol molecule. In this study, the results were discussed from the viewpoint of chemical and physical properties between permeant molecules and membrane in the diffusion state.

• Microbiology and Biotechnology Letters
• /
• v.19 no.4
• /
• pp.405-412
• /
• 1991

The enzymes were immobilized by treating the microbial cells in 0.05% chitosan and 0.28% glutaraldehyde solution. The activity of immobilized cell was about 535 IGIC/g. Glucose isomerase was purified by 6.5 times after homogenization using 60% $(NH_4)_2S0_4$ fractionation, DEAE-cellulose and Sephadex G-150 gel filtration. The molecular weight of enzyme was about 140,000 when it was measured by HPLC and the purified enzyme had only one band by electrophoresis. It showed good enzyme activity at pH 7.5 and $75^{\circ}C$. The optimum conditions for enzyme reactions were shifted to pH 7.0 and $80^{\circ}C$ when the enzyme was immobilized. The enzyme reaction was activated by the addition of 5~10 mM magnesium ion and the thermostability was improved by the addition of 0.25 mM cobalt ion. The enzyme activity was competitively inhibited by sugar alcohols.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.939-943
• /
• 1999

Recently there has been an explosion of interest in the topic of biodegradable polymers for medical applications. In this study, films were prepared by solution casting method using natural polymers (xanthan, locust bean, guar gum, chitosan and algin) as biomaterials. Biocompatibility of films prepared from natural polymer as a skin implant was evaluated. These biodegradable films were subcutaneously implanted in the back of rats and their biodegradability was investigated by the evaluation of changes in structure, film weight and hematology as a function of time for the biotransformation. The result of rats test showed that locust bean and guar gum induced some suspects of non-biocompatibility in the tissue by foreign body reaction 24 and 48 hrs after implantation. These results showed the potential of partial biodegradable films prepared from natural polymer for ideal skin biomaterials at short period.

• Applied Chemistry for Engineering
• /
• v.8 no.2
• /
• pp.237-245
• /
• 1997

A DEAE-chitin was prepared with DEAE HCl in an aqueous alkali-chitin solution. The resulting DEAE-chitin exhibited a highly improved affinity to water and organic solvents, It was N-deacetylated by heating in aqueous 10% sodium hydroxide containing sodium borohydride for 9h at $80^{\circ}C$ to produce DEAE-chitosan. These conditions were milder than those for the N-deacetylation of chitin. In order to increase its cationic character, the DEAE-chitin was treated with ethyl halide to give TEAE-chitin. The structural changes in the chitin derivatives were confirmed by using both FT-IR and $^1H$ NMR, and their flocculating behavior, in kaoline suspension showed the optimum property at a weak alkaline pH and 8 ppm concentration of resin conditions.

• Microbiology and Biotechnology Letters
• /
• v.26 no.4
• /
• pp.345-351
• /
• 1998

In an effort to develop a potent system for the production of various dp (degree of polymerization) chitooligosaccharides, 32 enzymes or microbial systems were screened for chitosanolytic acitivity using chitosan as a substrate. The efficiency of each enzyme system was evaluated by the changes of turbidity and viscosity of chitosan solution, the amount of precipitate and the reducing sugar-producing activity in the enzymatic reaction mixture. Based on these assay methods for the chitosanase activity, Bacillus sp. P2l out of 32 screened systems showed highly potent endochitosanase, which was comparable with a commercially available enzyme (E7). Chitooligosaccharides of dp 3-7 were separated by TLC as major enzymatic reaction products, suggesting that the chitosanase from Bacillus sp. P2l be endo-splitting type.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.582-588
• /
• 2009

Direct electron transfer of hemoglobin (Hb) in the chitosan (CTS) and $TiO_2$ nanoparticles (nano-$TiO_2$) composite films was achieved by using a room temperature ionic liquid of 1-butyl-3-methylimidazolium hexafluorophosphate ($BMIMPF_6$) modified carbon paste electrode (CILE) as the basal electrode. UV-Vis and FT-IR spectroscopy indicated that Hb in the film retained the native structure. Electrochemical investigation indicated that a pair of well-defined quasi-reversible redox peaks of Hb heme Fe(III)/Fe(II) was obtained with the formal potential located at -0.340 V (νs. SCE) in pH 7.0 phosphate buffer solution (PBS). The electrochemical parameters such as the electron transfer coefficient (α), the electron transfer number (n) and the standard electron transfer rate constant ($k_s$) were got as 0.422, 0.93 and 0.117 $s^{-1}$, respectively. The fabricated CTS/nano-$TiO_2$/Hb/CILE showed good electrocatalytic ability to the reduction of trichloroacetic acid (TCA) and hydrogen peroxide ($H_2O_2$), which exhibited a potential application in fabricating a new kind of third generation biosensor.

• Advances in nano research
• /
• v.10 no.1
• /
• pp.77-90
• /
• 2021

In the present study, novel chitosan coated magnetic magnetite (Fe3O4) nanoparticles were successfully biosynthesized from mushroom, Agaricus campestris, extract. The obtained bio-nanocomposite material was used to investigate ultra-fast and highly efficient for removal of Ni2+ ions in a fixed-bed column. Chitosan was treated as polyelectrolyte complex with Fe3O4 nanoparticles and a Fungal Bio-Nanocomposite Material (FBNM) was derived. The FBNM was characterized by using X-Ray Diffractometer (XRD), Scanning Electron Microscopy-Energy Dispersive X-Ray Spectroscopy (SEM-EDS), Fourier Transform Infrared spectra (FTIR) and Thermogravimetric Analysis (TGA) techniques and under varied experimental conditions. The influence of some important operating conditions including pH, flow rate and initial Ni2+ concentration on the uptake of Ni2+ solution was also optimized using a synthetic water sample. A Central Composite Design (CCD) combined with Response Surface Modeling (RSM) was carried out to maximize Ni2+ removal using FBNM for adsorption process. A regression model was derived using CCD to predict the responses and analysis of variance (ANOVA) and lack of fit test was used to check model adequacy. It was observed that the quadratic model, which was controlled and proposed, was originated from experimental design data. The FBNM maximum adsorption capacity was determined as 59.8 mg g-1. Finally, developed method was applied to soft drinks to determine Ni2+ levels. Reusability of FBNM was tested, and the adsorption and desorption capacities were not affected after eight cycles. The paper suggests that the FBNM is a promising recyclable nanoadsorbent for the removal of Ni2+ from various soft drinks.