• Korean Journal of Organic Agriculture
• /
• v.5 no.2
• /
• pp.93-104
• /
• 1997

In order to investigate the growth response of grasses to chitosan solution amended soil were studied from the standpoint of estimating the growth stimulating adequate concentrations of chitosan solution amended soil in each grass. Three species in this experiment used were orchardgrass, tall fescue and reed canarygrass. Six different concentrations of chitosan solution amended soil were 0%(control), 0.01%, 0.05%, 0.1%, 0.5% and 1.0%, respectively. The resulte obtained were as follows ; 1. Leaf area(LA), dry weight of leaf(LW), dry weight of shoot(SHW), biological yield(BY), C/f ratio and T/R ratio were significantly different between species. 2. Growth stimulating effect by chitosan solution amended soil were found in plant length(PL) and T/R ratios of grasses. 3. Adequate concentrations of chitosan solution amended soil were different between species. The highest values of yield components and dry weight of plant parts were obtained at 0.01% in orchardgrass, 0,05% in reed canarygrass and 1.0% in tall fescue, respectively. 4. The growth response of grasses to chitosan solution amended soil were different between species. Thus, an increase in leaf area(LA) and dry weight of leaf(LW) by chitosan solution amended soil was mainly contributed to increase in dry weight of shoot(SHW) and biological yield(BY) in orchardgrass. Chitosan solution amended soil also stimulated growth of shoot and increased in biological yield(BY) in tall fescue. In reed canarygrass contributed to increase in C/F ratios. 5. Adequate concentrations of chitosan solution amended soil for an economical benefit of cultivation and dry matter production of grasses were ranged from 0.01% to 0.05% levels.

• Textile Coloration and Finishing
• /
• v.17 no.1
• /
• pp.30-37
• /
• 2005

The tensile properties, acetic acid solubility and degree of swelling in distilled water of cellulose/chitosan and sericin/chitosan film blended by mixing chitosan acetic acid solution with cellulose solution or sericin solution were investigated and the effect of crosslinking agent on solubility and degree of swelling were also considered. From the experimental results, the model of intermolecular bond is proposed. Tensile modulus of 100% cellulose film is high but the tensile strength and elongation are low. The elongation of 100% chitosan film is high but tensile modulus and strength is low. But it is possible to make film having same or higher tensile strength and modulus compared to that of 100% cellulose film by mixing cellulose and chitosan or by mixing sericin and chitosan. Chitosan is solved in 5vol % acetic acid solution but cellulose and sericin are not solved. Degree of swelling of chitosan in distilled water is higher than that of cellulose and sericin. Lower than 40wt% chitosan content, the solubility of cellulose/chitosan film in 5vol % acetic acid solution shows lower expected value but higher in case of sericin/chitosan film.

• Korean Journal of Food Science and Technology
• /
• v.42 no.6
• /
• pp.688-692
• /
• 2010

The aim of this study was to investigate the effects of molecular weight and concentrations of chitosan on the germination of brown rice. Brown rice was germinated at $30^{\circ}C$ for three days in various chitosan solutions. The germination rate of the brown rice increased with increasing concentrations of chitosan solution, and was higher in the chitosan solution than in water. GABA content increased with increasing germination time and chitosan solution concentration. As the molecular weight of the chitosan decreased, germination rate and GABA content increased in the brown rice. The GABA content of germinated brown rice using low molecular weight chitosan A in a 100 ppm solution was 5145.5 nmole/g. This is approximately a five times higher value than that of the water-germinated brown rice. Texture properties were enhanced in all the germinated brown rice samples in chitosan solution compared to the brown rice germinated in water. These results indicate that chitosan solution treatment can increase germination rate and GABA synthesis activity in brown rice during germination, and can also improve the texture properties of brown rice.

• Fashion & Textile Research Journal
• /
• v.4 no.6
• /
• pp.557-563
• /
• 2002

Water-soluble chitosan and water-insoluble chitosan with molecular weight of 2,000,000, 500,000, 80,000, and 40,000 with more than 90%of degree of deacetylation were produced to test antibacterial activity of chitosan against a pathogenic bacteria, Methicillin Resistant Staphylococcus aureus(MRSA). the AATCC Test Method 100and Modified AATCC Test Method 100 were used to evaluate the antibacterial activity of chitosan. Antibacterial activity of chitosan/acetic acid solution was the same when they were tested by two different methods, but those of polyester fabrics treated with chitosan/acetic acid solution were different in different antibacterial test. So several problems were found in the experimental methods. The AATCC Test Method 100 seems that excessive nutrition exists in inoculum solution by quantitative analysis on the basis the result of antibacterial activity on chitosan/acetic acid solution and amount of chitosan attached to the surface of treated fabrics.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.29 no.6
• /
• pp.843-848
• /
• 1996

As the first step of studies related to production of chitooligosaccharides by physical methods, chitosan solution were sonicated with 20 kHz and various treatment effects were examined to present fundamental data of sonicated chitosan solution. Intrinsic viscosity of chitosan solution sharply decreased from 3.76 dl/g to 2.90 dl/g until 5 minutes of sonication and then slowly decreased. With low volume of chitosan solution, sonication was very effective and temperature of chitosan solution slightly affected the efficiency of sonication. In case of changing the solvent, no significant differences were observed on the effect of sonication, however, acetate buffer had highest sonication effect among various solvents. The sonication effect was increased as the increasement of the value of pH, on the contrary, ionic strength and type of counterions showed no effect on sonication. With these results, we assumed that optimal sonication treatment would be as follows, solution volume was $10\~20\;ml$, temperature range was $20\~30^{\circ}C$, pH value of solution was 4.5 and type of solvent was acetate buffer.

• Korean Journal of Organic Agriculture
• /
• v.4 no.2
• /
• pp.79-85
• /
• 1995

This experiment was carried out to broadcating effect of chitosan solution levels on dry matter production in Ladino clover(Trifolium repens). Chitosan solution was applie at 6 levels, 0%, 0.01%, 0.05%, 0.1%, 0.5% and 1.0%, respectively. The results obtained were summarized as follows ; 1. The dry matter yields of chitosan treatment plot were about 30%~63% more than the dry matter yield of control plot in all cuts. 2. Total dry matter yield was produced by 659.7kg/10a at levels of 0.05%, it was significantly higher than other chitosan solution levels. 3. The predictable highest yield and economic yield of Ladino clover could be obtained at 0.05% and 0.01% solution levels, respectively. 4. The relative dry matter yields for total dry matter yield were 66.7%, 18.3% and 15.0% at 1st, 2nd and 3rd cut, respectively. Chitosan application at early spring was affected to increasing the dry matter yield of 1st cut.

• Korean Journal of Human Ecology
• /
• v.1 no.2
• /
• pp.119-128
• /
• 1998

Nonwoven fabrics for diaper coverstock were treated with chitosan solution by pad-dry method. Two chitosans of different molecular weigh(Mw) with similar degree of deacetylation(DDA) were used: Mw 1,800(chitosan oligomer, DDA 84%). Effect of chitosan treatment on the mechanical properties was investigated using KES-FB system. Primary hand values were calculated from mechanical properties using the same equation as the men's suiting equation with minor modification, and total hand values were calculated using new KN-5LNW equation for nonwoven fabrics developed by Kawabata et al. Increase in chitosan treatment concentration increased B, 2HB, WT, LT and RC, and decreased WC continuously. Chitosan treatment affected other mechanical properties regardless of molecular weight. Considering primary hand values obtained from mechanical properties, it was found that chitosan of Mw 180,000 and chitosan oligomer provided softer, smoother, and more bulky at below 0.05% and above 0.5% treatment concentration respectively. Samples treated with 1.0% chitosan oligomer solution, and 0.01％ chitosan solution of Mw 180,000 showed the best total hand values. (Korean J Human Ecology 1(2):119∼128, 1998)

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.4
• /
• pp.397-400
• /
• 1995

Effects of rheological parameters, such as shear rate, temperature, concerntration, salts on the apparent viscosity of chitosan(deacetylation degree: $84\%$, Mw: 267,000) dissolved in acetate buffer(pH 4.5) were investigated. Rheologiral properties of chitosan solution from cuticle of red snow crab (Chinonecetes japonicus) are as follows. $0.5\%$ chitosan in 0.1M acetate buffer (pH 4.5) solution showed Bingham flow having hysteresis loop. It's flow equation was $\sigma=0.757+19.6_\gamma(r^2=0.99)$. The viscosity of chitosan solution is exponentially increased with its concentration, and showed Arrhenius dependence with respect to the temperature $(10^{\circ}C-40^{\circ}C).$ When various salts were added to chitosan solution, the viscosity decreased as the concentration of counterion increased. But the type ot counterions itself does not have any significant effects on the viscosity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.395-398
• /
• 1999

Chitin was isolated from red snow crab (Chinonecetes japonicus) and deacetylated by boiling alkaline solution to produce chitosan. The physical properties of chitosan solution and its film properties was examined, As the molecular weights of chitosan was increased from 297Kpa to 319Kpa, the tensile strength, degree of elongation and water permeability of chitosan film were increased. As the degree of deacetylation of chitosan was increased, the tensile strength, the degree of elongation and water permeability of chitosan film were increased. As the concentration of chitosan solution was increased, the degree of elongation and water permeability of film were increased, whereas the tensile strength of film was decreased, As the pH of chitosan solution was increased, the tensile strength and water permeability of film were decreased, whereas the degree of elongation of film was increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.997-1007
• /
• 2005

The textile finishing methods utilizing chitosan have been mostly focused on the applications in the improvement of the dyeing of cotton fabrics, or the improvement of hand of the cotton or wool fabrics. On the other hand, it Is difficult to find the application examples in the synthetic fiber fabrics including polyester and nylon fabrics. The aim of this study is to improve the stiffness and the poor wash fastness of the fabrics treated only with chitosan. We tried to improve the softness by employing chitosan and polyurethane mixture solution and to prevent the detachment of the chitosan from the fabric. The treatment was applied to cotton, polyester, and nylon fabrics. The change of the properties of the treated fabrics were investigated. The optimum finishing condition was sought by changing the mixture ratio of the chitosan/PU(polyurethane) solutions. The adjusted ratios of the chitosan/PU solutions were 1 : 0, 1 : 0.25, 1 : 0.5, and 1 : 2 during the mixture solution preparation. Using the KES(Kawabata Evaluation System), the physical and mechanical properties of the finished fabric specimens were analyzed, and hand values of the specimens were calculated through the use of translational formulas. According to the chemical composition of the fibers, chitosan solution or chitosan/PU mixture exhibited wide range of coating effect. Since the chitosan acid solution has high polarity, the bonding force with the cotton fibers is high. By the appropriate addition of PU in the chitosan treatment of cotton, KOSHI and HARI values of the fabric improved. The air permeability of the chitosan/PU treated cotton fabric specimen improved, resulting in the highest value at the mixture of chitosan : PU=1:0.25.