• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.155-164
• /
• 1996

The architecture of a programmable video codec IC is described that employs multiple vector processors in a single chip. The vector processors operate in parallel and communicate with one another through on-chip shared memories. A single scalar control processor schedules each vector processor independently to achieve real-tiem video coding with special vector instructions. With programmable interconnection buses, the proposed architecture performs multi-processing of tasks and data in video coding. Therefore, it can provide good parallelism as well as good programmability. especially, it can operate multithread video coding, which processes several independent image sequences simultaneously. We explain its scheduling, multithred video coding, and vector processor architectures. We implemented a prototype video codec with a 0.8um CMOS cell-based technology for the multi-standard videophone. This codec can execute video encoding and decoding simultaneously for the QCIF image at a frame rate of 30Hz.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.376-379
• /
• 1999

The wavelet transform chip is implemented with Daubechies' 4 tap filter. It works at 20MHz in Field Programmable Gate array (FPGA) implementation of Quadrature Mirror Filter(QMF) Lattice Structure. In this paper, the structure contains taro-channel quadrature mirror filter, data format converter(DFC), delay control unit(DCU), and three 20$\times$8 bits real multiplier. The structures for the DFC and DCU need to he regular and scalable, require minimum number of regular, and thereby lead to an efficient and scalable architecture for the Discrete Wavelet Transform(DWT). These results present the possibility that it can be used in Digital Signal Processing(DSP) application faster than Fourier transform at small area with lour cost.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.3
• /
• pp.66-76
• /
• 1995

In this research, a mesh connected VLSI structure is proposed for the real time computation of the generalized Hough transform(GHT). The purpose of the research is to design a generalized Hough transformer that can be realized as a single chip processor. The GHT has been modified to yield a highly parallel structure consisting of simple processing elements(PEs) and communication networks. In the proposed structure, the GHT can be computed by first assigning an image pixel to a PE and performing shift and add operations. The result of the CAD circuit simulation shows that it can be computed in the time proportional to the number of pixels in the pattern. In addition to the Hough transformer, the peak detector has been designed to reduce 1)the number of the I/O operations between the transformer and the host computer and 2) the host computer's burden for peak detection by transmitting only the local peaks detected from the transformed accumulator. It is expected that the proposed single chip Hough transformer with peak detector makes a fast and inexpensive edge based object recognition systems possible for many industrial and military applications.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.8
• /
• pp.22-38
• /
• 1997

This paper proposes a new VLSI architecture for morphological filters and presents its chip design and implementation. The proposed architecture can significantly reduce hardware costs compared with existing architecture by using a feedback loop path to reuse partial results and a decoder/encoder pair to detect maximum/minimum values. In addition, the proposed architecture requires one common architecture for both diltion and erosion and fewer number of operations. Moreover, it can be easily extended for larger size morphologica operations. We developed VHDL (VHSIC hardware description language) models, performed logic synthesis using the SYNOPSYS CAD tool. We used the SOG (sea-of-gate) cell library and implemented the actual chip. The total number of gates is only 2,667 and the clock frequency is 30 MHz that meets real-time image processing requirements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.388-397
• /
• 2002

We designed a SIMD-DSP/FPU that can efficiently improve multimedia processing performance when integrated into high-performance embedded microprocessors. We proposed partitioned architectures and new schemes for several functional units to reduce chip area. Sharing functional units reduces the area of FPU significantly. The proposed architecture is modeled in HDL and synthesized with a 0.35$\mu\textrm{m}$ standard cell library. The chip area is estimated to be about 100,000 equivalent gates. The designed unit can run at higher than 50MHz clock frequency of CPU core under the worst-case operating conditions.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.4
• /
• pp.8-13
• /
• 1997

This paper describes a scalable systolic synchronous memory for digital signal processing and packet switching. The systolic synchronous memory consists of the 2-D array of small memory blocks which are fully pipelined and communicated in three directions with adjacent blocks. The maximum delay of a small memory block becomes the operation speed of the chip. The array configuration is scalable for the entire memory size requested by an application. it has the initial latency of N+3 cycles with NxN array configuration. We designed an experimental 200 MHz 4Kb static RAM chip with the 4x4 array configuration of 256 SRAM blocks. It was fabricated is 0.8$\mu\textrm{m}$ twin-well single-poly double-metal CMOS technology.

• Journal of Institute of Control, Robotics and Systems
• /
• v.1 no.1
• /
• pp.50-57
• /
• 1995

In this paper, the design and the implementation of the controller for an articulate robot, which is developed in our Automatic Control Laboratory, are mainly discussed. The controller reduces software computational load via distributed processing method using multiple CPU's, and simplifies structures by the time-division control with TMS320C31 DSP chip. The method of control is based on the fuzzy-compensated PID control with scale factor, which compensates for the influence of load variation resulting from the various postures of the robot with conventional PID scheme. The application of the proposed controller to the robot system with DC servo-motors shows some excellent control capabilities. Also, the response characteristics of system for the various trajectory commands verify the superiority of the controller.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.188-198
• /
• 1994

The distributed arithmetic approach has been commonly recognized as an efficient method to implement the inner-product type of computation with fixed coefficients such as DCT/IDCT. This paper presents a novel architecture and the implementation of 2-D DCT/IDCT VLSI chip based on distributed arithmetic. The main feature of the proposed architecture is a fully 2-bit serial pipeline and parallel structure with memory-based signal processing circuitry, which is efficient to the implementation of the bit-serial operation of distributed arithmetic. All modules of the proposed architecture are designed with NP-dynamic circuitry to reduce the power consumption and to increase the performance. This chip is applicable in HDTV systems working at video sampling rate up to 75 MHz.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.11
• /
• pp.25-30
• /
• 2017

In this paper, We proposed an effective demosaicking method for single chip RGB-NIR sensors to recover RGB and NIR images. As the method operates in the spatial frequency domain, the frequency domain characteristics of the sampled CFA data are investigated. Using the luminance signal in the frequency domain and the chrominance signals are processed separately with different filters. The simulated images using the real images are compared with other state-of-art methods. As a result, the proposed demosaicking method resulted an effective calculation by a single processing which the existing alternating projection method requires repeated calculation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.3
• /
• pp.319-325
• /
• 2015

This paper presents an efficient vibration energy harvester with a piezoelectric (PE) cantilever. The proposed PE energy harvester increases the efficiency through minimization of hardware complexity and hence reduction of power dissipation of the circuit. Two key features of the proposed energy harvester are (i) incorporation synchronized switches with a simple control circuit, and (ii) a feed-forward buck converter with a simple control circuit. The chip was fabricated in $0.18{\mu}m$ CMOS processing technology, and the measured results indicate that the proposed rectifier achieves the efficiency of 77%. The core area of the chip is 0.2 mm2.