• Korean journal of applied entomology
• /
• v.34 no.4
• /
• pp.287-294
• /
• 1995

Studies were carried out to elucidate the efficacy of exogeneous 20-hydroxyecdysone treatment on terminating pupal diapause in the fall webworm. Hyphantria cunea Drury. And the difference was also investigated between normal adult development and post-diapause development after 20-hydroxyecdysone treatment. In the diapause termination rate of pupae treated with 20-hydroxyecdysone after storage for various periods at 16L:8D and $25\pm$$1^{\circ}C$, at the highest rate was observed from the group stored for the longest period and the lowest rate from those stored for 1.5 months. The time needed for adult emergence was inversely proportional to the chilling (at $0\pm$$1^{\circ}C$) period, and the longer its exposure period at low temperature, the higher its sensitivity to 20-hydroxyecdysone treatment. Pupal diapause duration was almost the same, regardless of storage period in the total darkness or at the photoperiod of 16L:8D, and also they successfully emerged to adult even without any experience at low temperature. The oxygen consumption rate in normally developing pupae showed nearly a typical U-form. But, that of diapausing pupae treated with 20-hydroxyecdysone slowly increased and jumped 14 days after the treatment. Pupal diapause began before formation of adult tissues, an a timing of adult tissue formation coincided with ascending timing of the metabolic rate in both normally developing pupae and diapausing pupae treated with 20-hydroxyecdysone. The diapausing pupae treated with 20-hydroxyecdysone was similar to normally developing pupae in band patterns of proteins from haemolymph or fat body.

• Horticultural Science & Technology
• /
• v.33 no.1
• /
• pp.55-60
• /
• 2015

Skin blackening is a serious postharvest disorder occurring in 'Fuyu' persimmon fruits (Diospyros kaki, 'Fuyu'). Phenolic content, polyphenol oxidase (PPO) and peroxidase (POD) activity, and lipid saturation were investigated in skin tissue of 'Fuyu' fruits. The phenolic compounds were accumulated unevenly on fruit skin depending on sunlight exposure, i.e., the most accumulation on sunny side and the least on the opposite, shaded side. The fruits harvested from shaded branches inside the canopy showed relatively even distribution of phenolic compounds in the skin. The activity distribution of PPO and POD were also uneven but only in fruits suffering f rom skin b lackening disorder, w ith the h ighest and the lowest a ctivity of PPO and P OD, respectively, in the blackened area of the fruit. When the sunny, southern sides of fruits were marked at harvesting time and fruits were stored at low temperature, a round black spot, as a symptom of skin blackening disorder, developed during storage exactly on the marked region. In addition, the sunny side of fruit showed higher lipid saturation, thus indicating adaptation to high temperature caused by the sunlight. These results suggest that the skin blackening disorder of 'Fuyu' fruits can be considered as a kind of chilling injury symptom that develops on the high-temperature-acclimated skin tissue of sunlight-exposed fruits when they are later exposed to low temperature.

• Food Science and Preservation
• /
• v.17 no.2
• /
• pp.190-195
• /
• 2010

Pressure, used as a minimal processing technology in the food industry, is a valuable tool ensuring microbiologically safe, shelf-stable fruit and vegetable production. Pressure could be used to deliver a greater variety of minimally processed products, as demanded by today's consumers. Weevaluated the effect of <400 MPa pressure, applied during chilling, on fresh fruit purees (strawberry, kiwi, aloe, and pomegranate) and vegetable extracts (from carrot and spinach) during cold storage (<$10^{\circ}C$) for 15-20 days. Samples were prepared in a processing facility in which total plate counts of falling and floating bacteria were controlled at $1{\times}100-10^1$ CFU/plate and $1{\times}10^2-10^3$ $CFU/m^3$ under conditions of $21-25^{\circ}C$ and 55-60% relative humidity. The aerobic plate counts of raw materials were less than $1{\times}10^3$ CFU/g. Evaluation parameters included microbiological safety, vitamin content, and sensory qualities. Although the overall quality of non-treated samples deteriorated with storage time at $10^{\circ}C$, samples pressurized at 250-350 MPa at $5-7^{\circ}C$ for 10 min showed less change, with no significant difference in microbiological safety, vitamin content, or sensory quality. The use of pressure extended the shelf-life during storage at $10^{\circ}C$.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.123-130
• /
• 1969

Five varieties of sweetpotatoes recommended in Korea were investigated with respect to the storing capacity, resin content and the possibility of developing sweetpotato chips as a new processed food item. The results are summarized as follows: 1) Two varieties, Suwon No. 147 and Chun-Mi were more resistant to chilling injury and soft-rot decay than other varieties. 2) The contents of resinous and polyphenolic substances were quite different depending upon the variety. 3) Sweetpotato chips of different color were made from different varieties and rapeseed oil was found to be the best as frying oil. 4) Best conditions to prepare sweetpotato chips with fresh color and proper texture were to dip slices of 1-2 mm thickness in 0.25% sodium bisulfite solution at $40^{\circ}C$ for 30-40 minutes and to subject to deep frying in an oil bath at $150-160^{\circ}C$ for 2.5 to 3.5 minutes. 5) Polyethylene-cellophane film as packing material of sweetpotato chips was the film in the moisture proof and film-impact tests.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.6
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.