• Korean Journal of Agricultural Science
• /
• v.18 no.1
• /
• pp.21-32
• /
• 1991

This experiment was carried out to examine sensory testing for Mozzarella cheese, process cheese, Cheddar cheese and Cheddar cheese made with red pepper, garlic, ginger and welsh onion to develop new cheese varieties which can be prefered by Korean. The chemical composition and sensory testing of cheese were measured. The results were summarized as follows ; 1. Total nitrogen percentages in Cheddar cheese and spiced Cheddar cheeses were similar but those in process cheese and Mozzarella cheese were low. 5% NaCl soluble nitrogen percentages were highest in Cheddar cheese. 5% NaCl soluble nitrogen percentages in each cheese were different. Ripening degree, water soluble nitrogen, TCA soluble nitrogen and SSA soluble nitrogen percentages in each cheese were similiar level. 2. Spiced Cheddar cheeses were more breakdown than other cheese and ${\alpha}_s$-casein breakdowns faster than $\beta$-casein. 3. In the result of sensory evaluation, color score was high in Mozzarella cheese and process cheese. The color score of Cheddar cheese was high in 30's-40's and 50's- 50's. The color score of 10's and 20's was high in Cheddar cheese made with garlic. 4. Odor score was high in Mozzarella cheese and process cheese, too. The odor score of Spiced Cheddar cheeses was high in 10's. 5. Texture score was high in Mozzarella cheese, process cheese and Cheddar cheese. 6. Teste score was high in Mozzarella cheese, process cheese and Cheddar cheese. The taste score of spiced Cheddar cheese was higher in 10's and 20's than that in 30's-40's and 50's-50's.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.189-203
• /
• 2008

The physical and chemical properties of radioactive waste drums, which have been temporarily stored on site, should be characterized before their shipment to a disposal facility in order to prove that the properties meet the acceptance guideline. The investigation of NDT(Nondestructive Test) method was figured out that the contents in drum, the quantitative analysis of free standing water and void fraction can be examined with X-ray NDT techniques. This paper describes the characteristics of X-ray NDT such as its principles, the considerations for selection of X-ray system, etc. And then, the waste drum characteristics such as drum type and dimension, contents in drum, etc. were examined, which are necessary to estimate the optimal X-ray energy for NDT of a drum. The estimation results were that: $(R)\acute{A}$ the proper X-ray energy is under 3 MeV to test the drums of 320 ${\beta}\S$ and less; $(R)\ddot{E}$ both X-ray systems of 450 keV and/or 3 MeV might be needed considering the economical efficiency and the realization. The number of drums that can be tested with 450 keV and 3 MeV X-ray system was figured out as 42,327 and 18,105 drums (based on storage of 2006. 12), respectively. Four testing scenarios were derived considering equipment procurement method, outsourcing or not, etc. The economical and feasibility assessment for the scenarios was resulted in that an optimal scenario is dependent on the acceptance guide line, the waste generator's policy on the waste treatment and the delivery to a disposal facility, etc. For example, it might be desirable that a waste generator purchases two 450 keV mobile system to examine the drums containing low density waste, and that outsourcing examination for the high density drums, if all NDT items such as quantitative analysis for 'free standing water' and 'void fraction', and confirmation of contents in drum have to be characterized. However, one 450 keV mobile system seems to be required to test only the contents in 13,000 drums per year.

• Journal of Sericultural and Entomological Science
• /
• v.15 no.1
• /
• pp.37-48
• /
• 1973

The purpose of this studies is to improve the cohesion of raw silk through various analyses on cocoon drying, cooking, reeling, re-reeling, and on the properties of water. Also we investigated the correlation between silk testing items which we have reached to the following results. 1. Drying of cocoon When cocoons were slowly dried with 100$^{\circ}C$, the results of cohesion became much better. On the other hand, the results were considerably decreased in case the temperature with 115$^{\circ}C$. 2. Cooking of cocoon In case of the cooking of cocoon, we found that the result of cohesion was best with incomplete cooking, that of the control was next, while in over cooking, the results were very low. Also the results of cohesion were much better when using the method of over cooking with sericin arrestive agent than that of incomplete cooking with sericin agglutinating agent. 3. Reeling of cocoon A) When the temperature of reeling bath was 25-45$^{\circ}C$, the results of cohesion test were much better, but at the temperature below 25$^{\circ}C$ or above 45$^{\circ}C$, the results became worse. B) With out the process of croissieur, the results of cohesion were too bad, but in case of croissieur more than 1cm, cohesion became better rapidly. Further more, we understood that the results of cohesion were improving slightly with longer length of croissieur. C) When the velocity of reeling was increased, the results of cohesion also improved. The best results were shown when reeling velocity was 180-220 r.p.m. But when the velocity was increased more than 220 r.p.m., the results of cohesion got worse more or less. D) When the temperature of the drying pipe in reeling machine was raised, the results of cohesion also showed a tendency to improve. 4. Re-reeling A) We could net reach a conclusion as to have correlation between the number of dipping repeat in vacuum tank and the results of cohesion before re-reeling process. B) When we used Seracol 500 as an agglutination protective agent with l/1000 to l/2000 of water, the results of cohesion test were better. C) When we used Pearl-lite as an agglutination protective agent with 1/1000 to 1/2000 of water, the results of cohesion were considerably better. D) We gained tile best results when used Cohesion Improving Chemical, A-80, with 500-1500 times diluted. 1) Results of cohesion was improved when humidity was low or temperature was high in the rereeling machine. 5. Filature water A) The water pH near the isoelectric point of protein showed the best cohesion, but the farther water pH, the worser results were obtained. B) With the increasing of M-alkalinity in filature water, the results of cohesion were worse. Above all, we understood the tendency of the results of cohesion get worse when the M-alkalinity is increased above 200 ppm. C) By increasing the total hardness of the filature water, it improved the results of cohesion. Especially, when the total hardness was above 300ppm, the results were extremely high. 6. Effects combination of each results A) The result of effects combination in filature processes with the obtained best conditions was distinctively improved. But the results could not reach in mathematicaly double effect. When reelied under worse conditions, the results of cohesion test were too bad. There was "effect limit" for the promotion. B) Generally the results of cohesion were bad when the filature conditions(the temperature, pressure and the properties of water, etc) are processed as sericin loss to be high. On the other hand, the results were very good when lower sericin loss was controlled in filature conditions. C) When filature conditions such as reeling velocity and croissieur length provide pysical cohesion ability and when raw silk dry fast during reeling and re-reeling, we found the result of cohesion was better. 7. Correlation of silk testing items. A) A negative correlation exists between the results of cohesion test and cleanness defect. Another word, the result of cohesion test was found to be worse as cleanness defect increased. B) In cleanness, cohesion has negative correlation against the number of slugs, but we could not find any correlation against long loops, loose ends. C) Cohesion has negative correlation against average neatness and low neatness defect. The better the results of neatness respectively, the better the results of cohesion found. D) There is no correlation between tenacity and the results of cohesion test, but there was high positive correlation between the results of elongation and those of cohesion test. The more elongation, the better the results of cohesion was found.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.2
• /
• pp.203-214
• /
• 2018

Ballast water treated by sodium dichloroisocyanurate (NaDCC) injection method in ballast water management system (BWMS) contains reactive bromine, chlorine species and disinfection by-products (DBPs). In this study, we conducted whole effluent toxicity (WET) testing and ecological risk assessment (ERA) to investigate its ecotoxicological effects on the marine environment. WET testing was carried out for eight marine and fresh water organisms, i.e. diatom, Skeletonema costatum, Navicula pelliculosa, green algae, Dunaliella tertiolecta, Pseudokirchneriella subcapitata, rotifer, Brachionus plicatilis, Brachionus calyciflorus and fish, Cyprinodon variegatus, Pimephales promelas. The WET test revealed that diatom and green algae were the only organisms that showed apparent toxicity to the effluent; it showed no observed effect concentration (NOEC), lowest observable effect concentration (LOEC) and effect concentration of 50 % (EC50) values of 25.0 %, 50.0 % and over 100.0 %, respectively, in seawater conditions. In contrast, rotifer and fish showed no toxicities to the effluent in the all salinity conditions. Meanwhile, chemical analysis revealed that the BWMS effluent contained total of 25 DBPs such as bromate, isocyanuric acid, formaldehyde, chloropicrin, trihalomethanes (THMs), halogenated acetonitriles (HANs) and halogenated acetic acids (HAAs). Based on ERA, the 25 DBPs were not considered to have persistency, bioaccumulation and toxicity (PBT) properties. The ratio of predicted environmental concentration (PEC) to predicted no effect concentration (PNEC) of the all DBPs did not exceed 1.0 for general harbour environments, but isocyanuric acid, tribromomethane, chloropicrin and monochloroacetic acid exceed 1.0 for near ship environments. However, when NOEC (25.0%) of the WET test results where actual effluent was applied, it was concluded that the NaDCC injection method did not have unacceptable ecological risks to the general harbor including near ship environments.

• Tunnel and Underground Space
• /
• v.32 no.6
• /
• pp.491-501
• /
• 2022

Bentonite has been proposed as a buffer and backfill material for high-level radioactive waste repository. Under such repository environment conditions, bentonite is subjected to combined thermal, hydrological, mechanical, and chemical processes. This study evaluates the feasibility of applying X-ray CT technology on the characterization of bentonite under hydration conditions using a newly developed testing cell. The cylindrical cell is made of platic material, with a removable cap to place the sample, enabling to apply vertical pressure on the sample and to measure swelling pressure. The hydration test was carried out with a sample made of Gyeonju bentonite, with a dry density of 1.4 g/cm³, and a water content of 20%. The sample had a diameter of 27.5 mm and a height of 34 mm. During the test, water was injected at a constant pressure of 0.207 MPa, and lasted for 7 days. After one day of hydration, bentonite swelled and filled out the space inside the cell. Moreover, CT histograms showed how the hydration process induced an initial increase and later progressive decrease on the density of the sample. Detailed profiles of the mean CT value, CT standard deviation, and CT gradient provided more details on the hydration process of the sample and showed how the bottom and top regions exhibited a decrease on density while the middle region showed an increase, especially during the first two days of hydration. Later, the differences in CT values with respect to the initial state decreased, and were small at the end of testing. The formation and later reduction of cracks was also characterized through CT scanning.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.9
• /
• pp.47-53
• /
• 2010

This study was made on the fact that the compressive strength characteristic of the recently developed alkali silica-sol chemical grout material was examined, whose grout material used for this study was designed to understand its strength property through the uniaxial compressive strength test(homo-gel, sand-gel), permeability test, deflection strength test, etc. In order to compare with the engineering characteristics regarding alkali silica-sol grout material and sodium silicate grout material. The uniaxial compressive strength of silica-sol grout material was identified to be increased more than 3~5 times than sodium silicate grout material at the early stage(within 72 hours). When comparing with the uniaxial compressive strengths of Sand-gel and Homo-gel at the material age of 28 days in case of silica-sol grouting material the strength of Sand-gel was measured to be about 1.3 times higher than Homo-gel. In case of silica-sol, it is assumed to have the property to exert high strength when it is actually grouted into the ground. As a result of permeability test it is judged that it is possible to apply the silica-sol to the site in the place requiring the water cut-off as the silica-sol. As a result of testing the strength at the material age of 28 days of grouting-use silica-sol showed more than 3 times' difference than the sodium silicate grouting material.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5628-5636
• /
• 2012

Effective drying method of sewage sludge is researched in this study. To dry the sludge, chain crusher flash dryer was adopted to remove moisture content in the cell which is mostly responsible for the sludge moisture content. And Pilot plant experiment was conducted in real life sewage treatment plant to study effect and characteristics of operating conditions. Operating variables include sludge feeding rate, rotational speed of chain, process temperature and feed moisture content. As rotational speed of chain increased, product yield of sludge increased, and the performance of the testing system increased. And, as process temperature increased, the sludge drying efficiency increased. It is found that optimum feed moisture content is at 60% which shows the maximum sludge product yield and about 10 moisture content(%) of sludge product. Sludge feed rate showed optimal value, and when the sludge feed rate is exceeded, sludge product yield did not increased but the amount of residue increased. Pilot plant experiment results are as follow. The optimal condition for the rotational speed of chain 1600rpm(max. speed), final sludge discharge temperature $80^{\circ}C$, feed moisture content 60%, and feed rate 60kg/h. When the plant was operated at the optimal conditions, the final product showed fairly good results such as sludge product yield 85.5%, moisture content 11.0% and sludge drying efficiency 81.7%.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.1
• /
• pp.51-60
• /
• 2015

We applied gemological analytical approaches on Aquamarine from the Gilgit-Baltistan of Northern Areas, Pakistan. The standard gemological testing indicates that they are consistent with general characteristics of natural aquamarines. We have identified the inclusions of Tantalite-Mn by Raman analysis. It indicates that they occurs in association with the veins of Be-rich coarse pegmatite. And the results of chemical analyses, infrared absorption spectroscopy and Raman spectroscopy indicate that $H_2O$ molecules in channel mostly exist in Type-I and a little Type-II with low alkali ion. The comparison of relative peak intensity of FT-IR analysis can be used for prediction of $Na_2O$ content within not only emerald but also aquamarine.

• Korean Journal of Medicinal Crop Science
• /
• v.26 no.2
• /
• pp.157-169
• /
• 2018

Background: Cassia tora L., an annual or perennial plant of the Fabaceae family, is traditional medicine with various biological activities, including anti-constipation and, anti-inflammation. Chemical compounds such as anthraquinone glycoside and naphthalene derivatives have been isolated from this plant. Cassia tora L. is a common contaminant of agricultural commodities, but is toxic to cattle and poultry. Methods and Results: To investigate the potential toxicity, Cassia tora L. aqueous extract (CO) was administered orally to rats for 26 weeks at 0 (control), 300, 1,500 and 3,000 mg/kg/day (n = 10 for male rats for each dose). The positive control comprised animals orally administered anthraquinone 100 mg/kg/day. There was no treatment-related mortality. An increase in the kidney weight was observed at 3,000 mg/kg/day of CO and anthraquinone 100 mg/kg/day. Macrophage infiltration in the colon was observed at CO 1,500 and 3,000 mg/kg/day and anthraquinone 100 mg/kg/day, but there were no significant toxicological changes in the incidence and severity of the finding. Conclusions: The oral no-observed-adverse-effect level (NOAEL) of CO was 3,000 mg/kg/day in male rats and no target organs were identified. In addition, 300 mg/kg was found to be the no-observed-effect level (NOEL) for systemic toxicity under the conditions of the study.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.2
• /
• pp.85-91
• /
• 1994

An attempt to adjust the standard levels of NPK fertilizers application was made with the analytical data of soil and the results of field experiments on 18 vegetable crops 1. There was a remarkable accumulation of available $P_2O_5$ and exchangeable K of soil in the periods of 1980~1990 comparing with 1960~1970. 2. New fertilizer recommendations based on the accumulation of soil components enabled to decrease fertilizer requirements of major vegetable crops. It was founded that if such new recommendations were adopted by the farmer, 0~6.0kg N/10a, 0.7~12.3kg $P_2O_5/10a$ and 2.0~9.0kg $K_2O/10a$ could be saved without affecting the yield of crops 3. The formulas of fertilizer application for crops were corrected in order to determine optimal rate of each farmer field according to chemical properties of soil.