• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.6
• /
• pp.1186-1191
• /
• 2011

Composition which was used as a white smoke grenade consists of Aluminium(Al), Hexachloroethane(HCE) and Zinc Oxide(ZnO), etc. there is a possibility of misfire due to long term storage and there are very few reports on the mechanism behind misfire. In this study, an experimental method known as accelerated degradation testing is used to investigate the chemical mechanism resulting in misfire. The mechanism of chemical change during long term storage was analyzed with XRD and FT-IR. Analysis results suggest that a part of HCE consisting of the white smoke grenade disappeared and the other part was combined into $ZnCl_2$, $AlCl_3$, as a recycled intermediate product under closed system.

• Toxicological Research
• /
• v.25 no.3
• /
• pp.132-139
• /
• 2009

The toxicity test of ammonium persulfate was conducted to ensure of its potential toxic effects according to the single-dose acute oral toxicity study (OECD Guideline 423) and 90-day repeated dose sub-chronic oral toxicity study guideline (OECD Guideline 408) for establishing national chemical management system, and matching in the Globally Harmonized Classification System (GHS) category. In acute oral toxicity study, pasty stool, perineal contamination and temporary body weight decrease were observed after dosing 1st and 2nd challenge (300 mg/kg body weight). All test animals were dead within 6 hours after dosing at 3rd challenge (2000 mg/kg body weight). Therefore, the GHS class of test substance is considered class 4. In sub-chronic toxicity study, body weight changes, food consumptions, hematological, biochemical and pathological examination did not show any noticeable and significant differences between the administered (5, 20, 80 mg/kg body weight) and control (vehicle only) group animals. Based on these results, the no observed adverse effect level (NOAEL) is considered above 80 mg/kg body weight.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.730-739
• /
• 2015

108 microorganism types (79 types of fungi and 29 types of bacteria) were isolated from 25 automobiles generating bad odor when the air conditioner was turned on, and 43 types of fungi and 23 types of bacteria were identified. The analysis of condensate generated by the air conditioners in the automobiles indicated pH 6.4~7.1, 12.5~34.2 mg/L carbon source, 0.9~18.6 mg/L nitrogen source, 0.5~27.8 mg/L ion contents, and 0.1~7.7 mg/L mineral contents. The biofilms were formed by the mesophiles under the summer temperature/humidity condition ($26^{\circ}C$, 70% R.H.), and they were regenerated when the environmental factors (nutritional contents and temperature/humidity) were appropriate even after they were artificially removed. Although the antimicrobials removed 99.9% of planktonic cells within 15 minutes, they were not effective in removing biofilm. Up to 1,950 ppmv of ethanol was observed in the automobile treated with the antimicrobials. Although the figure is lower than the acute toxicity level when inhaled by humans, the health safety of the chemical substances used in the antimicrobials needs to be reviewed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.5
• /
• pp.674-680
• /
• 2012

As(III) and As(V) were analyzed in bamboo salts by hydride generation ICP-AES. In order to quantify the total amount of As in bamboo salts, $AsH_3$ was producted by reacting with 6 mol/L hydrochloric acid and $NaBH_4$, which was then analyzed by hydride generation ICP-AES. As(V) was quantified simultaneously after selectively quantifying As(III). As(III) was quantified by determining the total amount of As and then correcting for the amount of As(III). To improve the reliability of the analysis we repeated the experiment several times to check the detection limit, quantification limit, and measurements of our testing methods. According to the result of our quantification analysis of As existing in bamboo salt, the range of total As content was 0.05 mg/kg~0.2 mg/kg and As(V) was over 90% of the total As.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.2
• /
• pp.73-81
• /
• 2011

The purpose of this study was to obtain scientific information regarding classification and health hazards that may result from a 13 weeks inhalation exposure of isoprene in Sprague-Dawley (SD) rats. The testing method was conducted in accordance with OECD guidelines for the testing of chemicals No. 413. The Rats were divided into 4 groups (10 male and 10 female rats in each group) and exposed to 0, 360, 1,620, 7,300 ppm isoprene in each exposure chamber for 6 h/day, 5 days/week, for 13 weeks. As a result, there were no mortality or abnormality during the period of study and did not show any significant changes of body weight. There were no dose response changes in urinalysis, hematological and serum biochemical value examination. Relative organ weight was increased significantly the right kidney in 7,300 ppm group of male rats. In female rats, relative organ weight of the left kidney and the both lungs in 1,620 ppm group and the left lung and the both kidneys in 7,300 ppm group were increased significantly. But the histopathological findings did not reveal any exposure-related changes. According to the above results, the no observable adverse effect level (NOAEL) of isoprene was 7,300 ppm (20.3 mg/L) in both male and female rats. In conclusion, Isoprene was not classified specific target organ toxicity of the 'Standard for Classification and Labeling of Chemical Substance and Material Safety Data Sheet' (Ministry of Employment and Labor, 2009).

• KSBB Journal
• /
• v.30 no.2
• /
• pp.69-76
• /
• 2015

The antibacterial activity of a antimicrobial (organic synthetic or organic natural material) on the bacteria (Bacillus megaterium, Arthrobacter oxydans, Micrococcus luteus, Methylobacterium aquaticum) detected in the automobiles showed 99.9% bacteria decrease rate within 30 min of being in contact with the tested bacteria culture. The MIC of the organic synthetic material based antimicrobials and the organic natural material based antimicrobial on the bacteria were 31~500 mg/mL and 8~250 mg/mL, respectively. The bacteria and biofilms were formed on the surface of aluminum after 5 ~8 days in the case of addition of the organic synthetic material based antimicrobial to the MIC values for the tested bacteria culture. On the other hand, there was no proliferation of bacteria and formation of biofilms on the surface of aluminum even after 30 days in the case of addition of the organic natural material based antimicrobial to the MIC values for the tested bacteria culture. As a result, the organic natural material based antimicrobial was confirmed to be more excellent effect of inhibition of bacterial proliferation and restraint of biofilms formation than the organic synthetic material based antimicrobial.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.431-437
• /
• 2000

Standard Test Block(STB) for UT(Ultrasonic Testing) is a block approved by authoritative for material, shape and quality. STB is used for characteristic tests, sensitivity calibration and control of the time base range of UT inspection devices. The material, size and chemical components of STB should be strictly controled to meet the related standards such as ASTM and JIS because it has an effect upon sensitivity, resolution and reproductivity of UT. The STBs which are not approved are sometimes used because the qualified STBs are very expensive. So, the purpose of this study is to survey the characteristics, quality and usability of Non-Standardized Test Blocks. Non-Standardized Test Blocks did not meet the standard requirements in size or chemical components, and ultrasonic characteristics. Therefore if the Non-Standardized Test Blocks are used without being tested, it's likely to cause errors in detecting the location and measuring the size of the defects.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.2 no.2
• /
• pp.9-16
• /
• 1983

There are two weak points in a high pressure vessel, one is a corner, the other is a crack on the base. In order to evaluate safety of a department of a corner and a crack like a starfish on the base in a high pressure vessel (working pressure: $130kg/cm^{2}$), which was made by Marison's Process, we analyzed stress by strain gauge, measured thickness and hardness by ultrasonic testing, and were able to test pressure by water pressure from nondestructive testing. Also destructive testings were applied to measure thickness and to observe microstructure and chemical composition of a corner on the base. From the results of the experiment, values of experiment were satisfied with a condition of application. But, it is considered that a crack on the base is to be investigated with more by Fracture Mechanics.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.14 no.2
• /
• pp.53-56
• /
• 2008

Polyvinylchloride(PVC) is variously used to produce food packaging, wrap film, sealing compound of drinking bottle cap. Safety of these PVC food package is controlled by Food Code, PVC regulation. This study was carried out researches on manufacture process, physical, chemical properties and monomer(CAS No., common name, molecular structure) of PVC to help the understanding of PVC material. Also, this study helps us the understanding of regulation through researches on the foundation of PVC regulation, the purpose of test and the comment of test method. It is considered that these informations of material properties and explanations of test method are very useful to PVC producers, users and analyzers of them.

• KSBB Journal
• /
• v.29 no.5
• /
• pp.392-398
• /
• 2014

It was confirmed that malodor connected with an air-conditioner in an automobile is caused by microbial volatile organic compounds (MVOCs) produced by microorganisms and through microorganisms coexisting with each other to form a biofilm on the evaporator surface. A bacterium, Methylobacterium aquaticum, can form a biofilm on the evaporator surface. The biofilm was composed of 45.79% C (Carbon), 42.36% O (Oxygen), 1.85% Na (Sodium), 5.42% Al (Aluminum), 1.39% P (Phosphorus), 0.74% Cl (Chlorine) and 2.45% K (Potassium). This result matches the composition of the biofilm formed on the surface of the used evaporator. It was determined that sulfur compounds (Hydrogen sulfide, Dimethyl sulfide) and organic acids (n-Butyric acid, n-Valeric acid, iso-Valeric acid) in the air which was blown into the automobile were generated by Methylobacterium aquaticum and Aspergillus versicolor, respectively. On the other hand, volatile organic compounds (Toluene, Xylene, 2-Ethylhexanol, 2-Phenyl- 2-propanol, Ethylbenzene) were not found. It is estimated that the reason is due to the low concentration of generated MVOCs or is caused by the change of some MVOCs depending on the nutrients (medium).