• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.236-236
• /
• 2017

Effluent treated by an NaDCC injection method in Ballast water management system (BWMS) contains reactive chlorine species and disinfection by-products (DBPs). In this study, we conducted whole effluent toxicity (WET) testing and ecological risk assessment (ERA) to investigate its ecotoxicological effects on marine environment. WET testing was carried out for four marine pelagic and freshwater organisms, i.e., diatom Skeletonema costatum, Navicula pellicuosa, chlorophyta Dunaliella tertiolecta, Pseudokirchneriella subcapitata, rotifer Brachionus plicatilis, Brachionus calyciflorus and fish Cyprinodon variegatus, Pimephales promelas. The biological toxicity test revealed that algae was the only biota that showed apparent toxicity to the effluent; it showed no observed effect concentration (NOEC), lowest observable effect concentration (LOEC) and effect concentration of 50% (EC50) values of 25-50%, 50-100% and >100%, respectively, at three water condition, but did not show any significant toxicities on other biota. Meanwhile, chemical analysis revealed that the BWMS effluent contained total residual oxidants (TROs) below $0.03{\mu}g/L$ and a total of 25 DBPs such as bromate, volatile halogenated organic compounds (VOCs), halogenated acetonitriles (HANs), halogenated acetic acids (HAAs), chloropicrin and Isocyanuric acid. Based on ERA, the 25 DBPs were not considered to have persistency, bioaccumulation and toxicity (PBT) properties. The ratio of predicted environmental concentration (PEC) to predicted no effect concentration (PNEC) of the other DBPs did not exceed 1 for General harbor environment. However, four substances (Isocyanuric acid, Tribromomethane, Chloropicrin and Monochloroacetic acid) were exceed 1 for Nearship environment. But observed toxicity in the test water on algal growth inhibition would be mitigated by normal dilution factor of 5 applied for nearship exposure. Thus, our results of WET testing and ERA showed that the BWMS effluent treated by NaDCC injection method would have no adverse impacts on marine environment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.1
• /
• pp.81-87
• /
• 2023

Heaters using the resistance heating principle are used in various industrial fields that require heat and are also essentially used in bidet among small home appliances. A planar heater and a coil-inserted heater mounted on a conventional commercially used bidet have disadvantages and limitations of complicated manufacturing process and local heating. In this study, silver-palladium (Ag-Pd) powder material was used for a screen-printing process that is more advantageous in achieving simplification than the existing process, and a rod-type heater for bidet was manufactured. The on-off cycle test under actual conditions was conducted to confirm the durability and the capability of the fabricated heater, and the fabricated heater operated more than 2,600 on-off cycles, which means it could be applied for a commercial product. In addition, through the on-off cycles under harsh conditions, the cause of failure was identified after the test that the durability limit temperature of the heater was 850℃. Through Ag-Pd rod heater in this study, it is expected to contribute to the efficient development of electrode materials for heaters and the improvement of the durability of heaters in the future.

• Korean Journal of Veterinary Service
• /
• v.44 no.3
• /
• pp.149-155
• /
• 2021

In virucidal efficacy testing, the chemical inactivation cannot be determined for all viruses due to the difficulties or the inability to culture sufficiently or the risk of exposure to the viruses. Therefore, disinfectants against these viruses could be evaluated by different methods and surrogate viruses are used as alternative. In this study we developed a method for efficacy testing of veterinary disinfectants using one of the candidate surrogate viruses, bacteriophage MS2, as part of the research on the selection of surrogate viruses for efficiency of efficacy testing of veterinary disinfectants. This method is based on the Animal and Plant Quarantine Agency (APQA) guidelines for efficacy testing of veterinary disinfectants. Bacteriophage and disinfectant are reacted in suspension in accordance with the APQA guidelines and then a newly established double agar layer method is applied for the efficacy test. The double agar layer method is summarized as follows: 1) The bottom agar with 1.5% agar is boiled and cooled before poured into petri dishes at volume of 20 mL, and dried under biological safety cabinet. 2) The top agar with 0.7% agar is boiled and kept at 50℃ before E. coli culture was seeded. 3) The serially diluted bacteriophage MS2-disinfectant mixtures 0.05 mL and E. coli host 0.01 mL (OD₆₀₀ 0.2~0.3) are mixed with 5 mL of top agar and incubate them at 50℃ for 5 min for reaction. 4) The resulting mixture is poured over top of a bottom agar plate and rocked sufficiently to ensure that the top agar covers the entire surface of the bottom agar. 5) The double agar layer is then placed under biological safety cabinet to allow the agar layer to solidify and subsequently incubated at 37℃ for 24 hr. 6) Following incubation, the plates may be inspected for plaques and record results.

• KSBB Journal
• /
• v.23 no.4
• /
• pp.285-290
• /
• 2008

Various methods (OECD 301B, ISO 9439 and ASTM 5864) for biodegradability test of lubricants were reviewed, and a standard procedure was developed. Most lubrication products are released in rivers or sea then is degraded by microbial action in aerobic condition. Most international method are based on $CO_2$ evolution test. Inoculum obtained from a sewage disposal plant and test compound are cultivated in a mineral medium. Organic carbon of the test compound is degraded and oxidized through the enzymatic actions of inoculum, and ultimately mineralized to carbon dioxide. Biodegradability test conditions of lubricant oils were optimized. The highest biodegradability was achieved when the same medium as in ASTM 5864 and inoculum concentration of $10^4{\sim}10^5$ cell/L were used. The optimum standard materials were selected as aniline and sodium acetate. Additionally the effects of inoculum type on microbial growth and biodegradability were examined. Finally the standard operating procedure (SOP) for biodegradability test method was proposed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.6
• /
• pp.588-592
• /
• 2015

Soil testing is one of the major strategies for establishing sustainable agricultural practice as it analyzes nutrient contents of soil and determines the amount of nutrients required for crop growth. Soil testing for the field cultivating regional major crops in Korea has been conducting by National Academy of Agricultural Science (NAAS), provincial agricultural research & extension services and agriculture technology centers since 2000. 1,006,227 soil samples were analyzed and uploaded on Korean soil information system (http://soil.rda.go.kr) from 2003 to 2013. Soil pH has changed from 6.1 to 6.2. Organic matter (OM), available (Avail.) phosphate and exchangeable (Exch.) K have decreased from 24 to $23gkg^{-1}$, 541 to $399mgkg^{-1}$ and 0.90 to $0.72cmol_ckg^{-1}$ between 2003 and 2013, respectively. Especially, Exch. Ca contents decreased to $5.7cmol_ckg^{-1}$ in 2009 and increased to $6.2cmol_ckg^{-1}$ in 2013. Ratios of optimal ranges for cropping were 48% for pH, 22% for OM, 26% for Avail. phosphate, and 23, 16, 22% for Exch. K, Ca and Mg in 2013. Ratios of optimal ranges for pH increased and low ranges for OM, Avail. phosphate and Exch. K increased. Frequency distribution was 64% for pH 5.5~7.0, 65% for OM $10{\sim}30gkg^{-1}$, 48% for Avail. phosphate under $300mgkg^{-1}$ and 23, 29, 22% for Exch. K 0.2~0.6, Ca 4.0~6.0 and Mg $1.0{\sim}1.5cmol_ckg^{-1}$.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.1-26
• /
• 1993

The purpose of this study was to investigate the effect of acid etching on the surface appearance and fracture toughness of five glass ionomer cements. Five kinds of commercially available glass ionomer cements including chemical curing filling type, chemical curing lining type, chemical curing metal reinforced type, light curing tilling type and light curing lining type were used for this study. The specimens for SEM study were fabricated by treating each glass ionomer cement with either visible light curing or self curing after being inserted into a rubber mold (diameter 4mm, depth 1mm). Some of the specimens were etched with 37% phosphoric acid for 0, 15, 30, 60, go seconds, at 5 minutes, 1 hour and 1 day after mixing of powder and liquid. Unetched ones comprised the control group and the others were the experimental groups. The surface texture was examined by using scanning electron microscope at 20 kV. (S-2300, Hitachi Co., Japan). The specimens for fracture toughness were fabricated by curing of each glass ionomer cement previously inserted into a metal mold for the single edge notch specimen according to the ASTME399. They were subjected to a three-point bend test after etching for 0, 30, 60, and 90 seconds at 5 minutes-, 1 hour-and 1 day-lapse after the fabrication of the specimens. The plane strain fracture toughness ($K_{IC}$) was determined by three-point bend test which was conducted with cross-head speed of 0.5 mm/min using Instron universal testing machine (Model No. 1122) following seven days storage of the etched specimens under $37^{\circ}C$, 100% humidity condition. Following conclusions were drawn. 1. In unetched control group, crack was present, but the surface was generally smooth. 2. Deterioration of the surface appearance such as serious dissolving of gel matrix and loss of glass particles occured as the etching time was increased beyond 15 s following Immediate etching of chemical curing type of glass ionomer cements. 3. Etching after 1 h, and 1 d reduced surface damage, 15 s, and 30s etch gave rough surface appearance without loss of glass particle of chemical curing type of glass ionomer cements. 4. Light curing type glass ionomer cement was etched by acid, but there was no difference in surface appearances according to various waiting periods. 5. It was found that the value of plane stram fracture toughness of glass ionomer cements was highest in the light curing filling type as $1.79\;MNm^{-1.5}$ followed by the light curing lining type, chemical curing metal reinforced type, chemical curing filling type and chemical curing lining type. 6. The value of plane stram fracture toughness of the chemical curing lining type glass ionomer cement etched after 5 minutes was lower than those of the cement etched after 1 hour or day or unetched (P < 0.05). 7. Light curing glass ionomer cement showed Irregular fractured surface and chemical curing cement showed smooth fractured surface.

• International Journal of Highway Engineering
• /
• v.3 no.1 s.7
• /
• pp.177-184
• /
• 2001

A recycling agent has been manufactured on the basis of the chemical composition of reclaimed asphalt binders and virgin asphalt binders. The chemical compositions of reclaimed asphalt binders extracted from reclaimed asphalt pavements have been analyzed according to the ASTM method and the results were compared to those of virgin asphalt binder AP-3. Reclaimed asphalt binders have shown that asphaltenes was increased whereas saturates, naphthene aromatics, and polar aromatics fractions were decreased. A recycling agent made of aromatic compounds, in which its chemical composition is similar to the aromatics fraction in asphalt binders, has been produced to reduce the amount of asphaltenes in reclaimed asphalt hinders. The evaluation of the recycling agent produced was performed by testing ductility, rolling and ball softening point, penetration at $25^{\circ}C$ and viscosity at $60^{\circ}C$. It was found that, by adding the recycling agent 20% by weight to the reclaimed asphalt binders, the physical properties of reclaimed asphalt binders was recovered to the level of virgin asphalt binder AP-3.

• Environmental Analysis Health and Toxicology
• /
• v.30 no.sup
• /
• pp.7.1-7.10
• /
• 2015

Objectives For successful adoption of legislation controlling registration and assessment of chemical substances, it is important to obtain sufficient toxicological experimental evidence and other related information. It is also essential to obtain a sufficient number of predicted risk and toxicity results. Particularly, methods used in predicting toxicities of chemical substances during acquisition of required data, ultimately become an economic method for future dealings with new substances. Although the need for such methods is gradually increasing, the-required information about reliability and applicability range has not been systematically provided. Methods There are various representative environmental and human toxicity models based on quantitative structure-activity relationships (QSAR). Here, we secured the 10 representative QSAR-based prediction models and its information that can make predictions about substances that are expected to be regulated. We used models that predict and confirm usability of the information expected to be collected and submitted according to the legislation. After collecting and evaluating each predictive model and relevant data, we prepared methods quantifying the scientific validity and reliability, which are essential conditions for using predictive models. Results We calculated predicted values for the models. Furthermore, we deduced and compared adequacies of the models using the Alternative non-testing method assessed for Registration, Evaluation, Authorization, and Restriction of Chemicals Substances scoring system, and deduced the applicability domains for each model. Additionally, we calculated and compared inclusion rates of substances expected to be regulated, to confirm the applicability. Conclusions We evaluated and compared the data, adequacy, and applicability of our selected QSAR-based toxicity prediction models, and included them in a database. Based on this data, we aimed to construct a system that can be used with predicted toxicity results. Furthermore, by presenting the suitability of individual predicted results, we aimed to provide a foundation that could be used in actual assessments and regulations.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.5
• /
• pp.512-522
• /
• 2008

Ammonia is a major compound of odor in livestock house. To enhance the performance of ammonia oxidation (decomposition). the gas-liquid, two phase photocatalytic oxidation system was designed and prepared in this study. Commercial P-25 as $TiO_2$ catalyst was used for ammonia decomposition. V/P-25 catalyst prepared by sol gel method was also used for the removal of by-producted $NO_x$ in $NH_3$ oxidation reaction. When $TiO_2$ was used as a photocatalyst, the conversion to $N_2$ in ammonia decomposition reached above 90% until 200hr (The air flow rate of 4L/min with the ammonia concentration up to 25ppm.). However, considerable amounts of NO and $NO_2$ were formed as a result of $NH_3$ oxidation (as a by-product). Therefore, we added Vanadia impregnated $TiO_2$(P-25) catalyst for the removal of $NO_x$ at the end of reaction trail. The results of a pilot-scale operation were successful to achieve the simultaneous removal of $NH_3\;and\;NO_x$ about 81 and 87%, respectively.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.129-141
• /
• 1995

Composite resin and glass-ionomer cement can be used for the purpose of repair of defective amalgam restoration. The purpose of this study was to evaluate of shear bond strength of esthetic restorative materials to dental amalgam. The materials used in this study were Photo Clearfil Bright(light curing composite resin), Clearfil F II(chemical curing composite resin), Fuji II LC(light curing glass-ionomer cement), Fuji II (chemical curing glass-ionomer cement), All-Bond 2(intermediary), and Scotchbond Multi-Purpose (intermediary). A total of 120 acrylic cylinders with amalgam were divided into 8 groups After amalgam condensation, all specimens were stored for 48 hours in water at $37^{\circ}C$ and tested with Instron universal testing machine between amalgam and composite resins and glass-ionomer cements. The data were analyzes statiscally by ANOVA and Duncan test. The following results obtained ; 1. The shear bond strength of bonded composite resin to amalgam was higher than bonded glass-ionomer cement(P<.001). 2. The group 4 had highest shear bond strength with 15.45kgf/$cm^2$ and the group 5 had lowest shear bond strenght with 3.26kgf/$cm^2$(P<.001). 3. In the group 3, 4, 5, 6, the group 3, 4 with All-Bond 2 had higher shear bond strength than the group 5, 6 with Scotch bond MP both in light-curing and in chemical curing. 4. Both in composite resin and glass-ionomer cement, chemical curing materials had higher shear bond stength than light curing materials(P<.001).