• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.2
• /
• pp.40-54
• /
• 2008

Small and large dams are installed in the course of a stream for maintaining the water level of the stream or obtaining agricultural water. Currently about 18,000 of them are installed in Korea to supply water. However, the environmental problems of small dams are well known : the interruption of stream eco-corridors, deterioration of water quality in the upper reaches of the small dam, changes in the habitats of riparian organisms, damages to the stream scenery. In a very few of these small dams artificial eco-corridors like fishways are installed, but the number is very minimal.Accordingly, to efficiently restore stream eco-corridors by removing these small dams, it will be necessary to closely examine physical impacts, such as changes in the riverbed and changes in the shape of the stream caused by the removal, chemical impacts, such as changes in water quality, and transport and accumulation of contaminated sediments and biological impacts, such as changes in the habitats of organisms, and develop related technologies in advance, and have these technologies verified through demonstration application in the sites. In this study, we analyzed the physical, chemical and ecological impacts of the removal of the above-mentioned small dams, and conducted a research on the demonstration small dam removal project for a spot investigation. As a result, the small dam removal will restore the eco-corridor, there by improving the habitat of fishes and crustaceans. The number of major underwater organisms inhabiting the Gokreungcheon, such as Korean spotted sleepers, Chinese minnows, Microphysogobio yaluensis, Abbottina rivularis, stone morokos, striped shinners, long-nosed barbels, and Chinese mitten crabs, is expected to increase, and the food chain in the ecosystem will improve so that species diversity will improve as well.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.3
• /
• pp.66-70
• /
• 2009

Paper cultural heritages usually experienced the chemical and the physical deterioration because of various factors including preservation environment and the property of their materials. General restoration technology for paper cultural heritages is the lining. The application of the lining paper and the lining technology has varied depending on researcher's experiences. Therefore, each lining material and technology must be evaluated to develop a standard guide for preservation and restoration of paper cultural heritages. To date, various analysis techniques using lining paper, in terms of their materials, have been applied to analyses of causes and condition of damages, but it is difficult to develop a standard restoration treatment method of paper cultural heritages because it varies by their material. The Hanf, is made frrr the mulberry, is generally used for the lining in Korea.edt is required that the cr, in terms properties and general properties of Hanf, is used for lining papers, are evaluated to develop a standard guide for their restoration.ed this study, the general properties of several lining papers(Hanf), especially dimensave bility, were evaluated as part of the standardization of lining papers. The result have varied depending on the pulping chemical and the manufacturers. the basis weight, thickness and tensale strength of lining papers is bigger the paper treated by natural ash than the paper treated by sodium carbonate.ed case of formation, folding endurance, and dimensave bility, the paper treated by sodium carbonate showed better properties than those of the paper treated by natural ash.

• Journal of Conservation Science
• /
• v.38 no.4
• /
• pp.301-313
• /
• 2022

We made a Korean white porcelain or Joseon Baekja jar and based on the raw materials used and reproductions of each stage, we aimed to compare and analyze the physicochemical changes of the raw materials such as clay at each manufacturing stage, as well as identify the characteristics and correlations. Although the basic main components of clay and glaze material are similar, their texture becomes denser in the process of bisque firing pottery (Chobeol-pyeon) and glaze firing pottery (Jaebeol-pyeon), and we confirmed that in addition to the tendency of increasing vitrification, low-temperature minerals such as mica and illite gradually disappeared, while high-temperature minerals such as cristobalite were newly created. This phenomenon has also been verified by the rapid decrease in absorption rate while the change in specific gravity was small. In addition, the color was greatly affected by the firing atmosphere, and the yellow-red chromaticity of the raw materials was higher during bisque firing but showed a rapidly decreasing characteristic during glaze firing. The value of magnetic susceptibility, which is related to iron (Fe) component, showed a tendency to decrease in glaze firing pottery. CT images were confirmed as a method that can indirectly estimate the change in the material properties of the object step-by-step for the entire object. In conclusion, the study of manufacturing stages of reproduction can provide basic data for scientific research on the estimation of porcelain and pottery making technology and changes in raw materials.

• Restorative Dentistry and Endodontics
• /
• v.20 no.1
• /
• pp.173-182
• /
• 1995

The purpose of this study was to evaluate the adaptability of light-cured glass ionomer cement to cavity walls. Class V cavities were prepared on the labial surfaces of extracted bovine incisor teeth. The cavities were restored with Fuji II as self-cured glass ionomer cement and Fuji II LC, Vitremer as light-cured glass ionomer cement. Fluorescent markers (fluoreceine and rhodamin B) were incorperated into liquid and primer for a better image of microscopic observation. Restored teeth were sectioned by longitudinal and labiolingual direction. The adaptability at the tooth-restoration interface was assessed incisally, axially and cervically by confocal scanning laser microscope. Following results were obtained : 1. Chemical-cured glass iomomer cement restoration showed close adaptation on the all of the cavity walls, but, cracks formed within the cement. 2. Light-cured glass ionomer cement restoration was well adapted to the cavity walls, but showed crack in the cement adjacent to axial dentinal wall. 3. There' was no significant difference in adaptability between two light-cured glass ionomer cement restorations.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.7-12
• /
• 2005

In heavy industrial fields such as power plant and chemical plant, it is often necessary to restore a damaged part of large machinery or structure which is installed in the hazard working place. In this paper, to evaluate the safety of plastic deformed cylindrical beam a finite element technique has been used. The variations of residual stresses on the process of damaging and restoring for surfaces and cross-sections have been examined. The results show that the maximum von Mises stresses occur outer cylinder surfaces of boundary between cylindrical beam support md cylindrical beam when deformation procedure and restoring force is applied. The maximum residual stress remains 158.6MPa in the inner wall and this value correspond to $53\%$ of yield stress then restoration procedure is finished.

• Conservation Science in Museum
• /
• v.7
• /
• pp.33-42
• /
• 2006

The Conservation Science Laboratory of the National Museum of Korea had drawn up the list of conservation treatment priority according to the artifact status in the collection and performed conservation treatment based on the priority list since 2006. This paper introduces the restoration process of the lost part of a black teacup(Sindo 1961) with newly developed restoration material. Part of the peeled off glaze was analyzed with LIBS and SEM-EDS analyser to find out the glaze ingredients that make the unique pattern of black teacup.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.4 no.4
• /
• pp.12-18
• /
• 2001

This study was carried out to analyze physico-chemical properties of soils at the ground of landscape planting in reclaimed land from the sea on Kwangyang Bay, South Korea. Physico-chemical properties of soils at each planting grounds were tested by ANOVA and were significantly(P<0.01) different. The difference came from the soil properties of the covered soil, the disturbance applied to the soil with land use and the accumulation of organic matter after landscape planting. Soil hardness, pH, ECe, Na and K level were in a stable condition at high then low of ground height for landscape planting. Organic matter accumulation was greater at lower planting grounds then top and slope ground of big mounding. The planting grounds of favorable growth for landscape trees were determined as following order : the slope ground and the top ground of big mounding>the ground of medium mounding>the coved ground of improve soil>the lower ground of big mounding>the filled ground of improve soil.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.6
• /
• pp.87-95
• /
• 2011

This study investigates Youl Chon Industrial Complex 1 by dividing into three regions : the drainage site, the area inside the complex, and the seaside. Then each region was subdivided into three areas resulting in a total of nine areas for soil sampling and analysis. After analyzing the physical and chemical properties of the soil, all nine area's pH and EC readings indicated that the soil condition is not suitable for vegetation growth (according to the previous study, the pH level was 5.8 and EC was 2.0dS/m). Therefore, for Youl Chon Industrial Complex 1 to become green, the neutralization and reduction of pH and EC level is needed; first, vegetation through dredging soil, and second, introduction of halophytes is suggested. This study finds out that vertical changes in physical and chemical properties of soils in reclaimed sites are very variable and the result depends on surrounding environments, so it suggested the basic data for building vegetation or reclaimed sites. However, the additional study aiming at various reclaimed sites is required as this study was conducted only to limited areas, and this study has left monitoring analysis as the follow-up task to check the relations between a plant community and soils.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.5
• /
• pp.37-48
• /
• 2015

Soil nutrient management is important to maintain the constant productivity of seedling production in the nursery for successful forest restoration. This study investigated the effects of organic manure and chemical fertilizer application levels on the growth, soil properties, and nutrient concentrations of yellow poplar seedlings. One-year-old yellow poplar seedlings were treated with the combination of 3 level organic manures(0, 5 Mg/ha, 10 Mg/ha; mixture of poultry manure, cattle manure, swine manure, and sawdust) and 3 level nitrogen-phosphorus-potassium(NPK) chemical fertilizers(0, 1x(urea, $30g/m^2$; fused superphosphate, $70g/m^2$; potassium chloride, $15g/m^2$), 2x). Organic manure significantly increased the soil pH and the concentrations of nitrogen, available phosphorous, exchangeable potassium, calcium, and magnesium. In contrast, the NPK chemical fertilizer decreased the soil pH and exchangeable calcium concentration, did not affect the soil concentrations of nitrogen and magnesium, and increased the concentrations of available phosphorous and exchangeable potassium. Both organic manure and NPK chemical fertilizer treatments increased the seedling height, root collar diameter, and dry weight by 39% and 25%, respectively. The treatment with manure 5 Mg/ha and NPK 2x chemical fertilizer mostly increased seedling dry weight by 2.6 times more than that of the control. Compared to the effects of the fertilization treatments on the soil properties, the effects on nutrient concentrations in the leaves were relatively small. These findings indicate that organic manure that was derived from livestock byproducts and sawdust can be utilized with chemical fertilizer to improve seedling production as well as conserving soil quality.

• Journal of Ecology and Environment
• /
• v.32 no.3
• /
• pp.167-176
• /
• 2009

Land cover changes associated with urbanization have driven climate change and pollution, which alter properties of ecosystems at local, regional, and continental scales. Thus, the relationships among urban ecological variables such as community composition, structure, health, soil and functioning need to be better understood to restore and improve urban ecosystems. In this study, we discuss urban ecosystem management and research from a futuristic perspective based on analyses of vegetation structure, composition, and successional trends, as well as the chemical properties of soils and the distribution of heat along an urban-rural gradient. Urban thermo-profile analysis using satellite images showed an obvious mitigating effect of vegetation on the Seoul heat island. Community attributes of Quercus mongolica stands reflected the effects of urbanization, such as pronounced increases in disturbance-related and pollution-tolerant species, such as Styrax japonica and Sorbus alnifolia. Retrogressive successional trends were detected in urban sites relative to those in rural sites. Changes in the urban climate and biotic environment have the potential to significantly influence the practice and outcomes of ecological management, restoration and forecasting because of the associated changes in future bio-physical settings. Thus, for management (i.e., creation and restoration) of urban green spaces, forward-thinking perspectives supported by historical information are necessary.