• Journal of Pharmaceutical Investigation
• /
• 제26권4호
• /
• pp.281-289
• /
• 1996

In our previous work, we have studied the effect of lactose and sodium alginate (SA) on the rate of release of 5-fluorouracil (5-FU) from ethylene-vinyl acetate (EVA) matrix. These hydrophilic additives promoted the rate of 5-FU release and the increase in rate was larger when SA was used. Both additives showed better ability to increase the rate than 5-FU itself. In this paper, we extended our study to another hydrophilic additive, Carbopol 940 (CP). Compared to SA or lactose, CP increased the rate of 5-FU release markedly. Release rate increased as the loading amount and the pH of the release medium increased. After release experiment, matrix volume increased up to 15 times of that before release experiment, depending on the amount of CP dispersed in the matrix and the pH of the release medium. On the other hand, the volume of the matrix containing lactose or SA decreased. The weight changes of the dry matrix before and after release experiment imply that CP is not released out of the matrix, to the contrary of lactose and SA. Scanning electron microscope study clearly showed that large cavities and pores are generated on the surface and the inside of the matrix. These results indicate that the mechanism by which CP increases the release rate is quite different from that of monomeric additives such as lactose or SA.

• Journal of Pharmaceutical Investigation
• /
• 제24권3호spc1호
• /
• pp.33-39
• /
• 1994

We have studied the effect of loading amount and particle size on the rate of release of 5-fluorouracil (5-FU) from ethylene-vinyl acetate (EVA) matrix. Release rate increased as the loading amount and particle size increase. We also studied the effect of additives (lactose and algin) on the rate of release of 5-FU. Both algin and lactose promoted the rate of release. The ability to increase the rate is in the order of algin>lactose>5-FU. Scanning electron microscope study clearly shows that large cavities and cracks are created. The results imply that, by the proper combinations of the amount of the additive, $EVA_c$ and drug, the rate of drug release can be modulated over a wide range of values.

• 한국위험물학회지
• /
• 제3권1호
• /
• pp.59-64
• /
• 2015

Semiconductor industry has large number of chemical inventory and is easily exposed to chemical release incidents. Toxic release is one of the most interested area in evaluating consequence to the vicinity of industry facilities handling hazardous materials. Hydrofluoric acid is one of the typical chemical used in semiconductor facility and is selected and toxic release is evaluated to assess the risk impacted to its off-site. Accident scenarios were listed using process safety information. The scenarios having effect to the off-site were selected and assessed further according to guideline provided by Korea government. Worst case and alternative scenarios including other interested scenarios were evaluated using ALOHA. Each evaluated scenario was assessed further considering countermeasures. The results showed that the facility handling hydroflooric acid is safe enough and needed no further protections at the moment.

• 한국가스학회지
• /
• 제19권1호
• /
• pp.51-56
• /
• 2015

To assess downward positions of water spray for the small-scale release of chlorine gas, dispersion coefficients for the Gaussian dispersion model were validated at the small-scale release experiment. And the downwind distances of water spray were assessed with the simulated results. As results, the Gaussian plume model using the Briggs' dispersion coefficient well estimated the dispersed characteristics for small-scale release of chlorine gas. The best adequate downwind position of water spray is the position of the maximum concentration of chlorine at the ground level. And the adequate vertical and horizontal dimensions of water spray consider the maximum width and height of cloud.

• Bulletin of the Korean Chemical Society
• /
• 제27권4호
• /
• pp.596-598
• /
• 2006

• Bulletin of the Korean Chemical Society
• /
• 제28권2호
• /
• pp.319-321
• /
• 2007

• 한국가스학회지
• /
• 제20권5호
• /
• pp.104-111
• /
• 2016

최근 화학물질을 사용하는 시설이 증가하면서 동시에 시설의 노후화, 기계적 결함, 인적오류 등으로 화학물질 누출사고 피해가 많아지고 있다. 특히, 산업단지는 군집 특성으로 인해 화학물질 누출사고 발생 시 인근 사업장으로 확산되어 큰 피해로 이어질 가능성이 크다. 이에 따라 화학물질을 취급하는 공정의 누출조건, 환경조건을 반영한 다양한 누출 시나리오를 토대로 빠른 감지와 대응을 위해 경계면의 센서배치 방안을 제시할 필요가 있다. 따라서 본 연구에서는 염소가스가 누출되는 경우에 대해 COMSOL를 사용하여 주요 매개변수의 적용으로 실질적인 사고 시나리오를 해석하였다. 그리고 사고 시나리오를 바탕으로, 센서의 감지 확률과 감지시간 등 각 항목마다 중요도를 부여하여 최적 위치가 산출되도록 목적함수를 선정하였다. 또한 예상치 못한 지역의 누출사고에 대해 최적화된 센서배치의 강건성 분석을 통해 본 방안의 타당성을 높였다. 결과적으로, 기존 방식보다 효과적으로 경계면의 센서배치 최적화 방법의 적용 가능성을 확인하였다. 이상의 결과로 부터 이동식 센서의 배치방법과 농도 데이터를 기반으로, 누출원의 역추적에 도움을 줄 수 있을 것으로 기대한다.

• Carbon letters
• /
• 제9권4호
• /
• pp.283-288
• /
• 2008

The composites of temperature-sensitive hydrogel and activated carbons were prepared in order to improve both the mechanical strength of hydrogel matrix and the loading capacity of drug in a hydrogel drug delivery system. The swelling of composite hydrogel was varied depending on the temperature. Both the swelling and the release behavior of the composite hydrogel were varied depending on the kind of activated carbon. The release behavior showed the high efficiency which is important for practical applications.

• 한국수소및신에너지학회논문집
• /
• 제19권4호
• /
• pp.299-304
• /
• 2008

Thermal decomposition of Ammonia Borane have been investigated with various analytical methods including TGA, TP-MS, DSC. By-products such as aminoborane and borazine were identified during hydrogen release by TGA, TP-MS analysis. $H_2$ release amount was measured at each temperature isothermally, which resulted in 7 wt% $H_2$ release at 130$^{\circ}C$. Moreover, higher temperature enhanced hydrogen release kinetics leading to shortened induction period from 20 min at 95$^{\circ}C$ to 0 min at 130$^{\circ}C$. Melting and decomposition at close temperature (4$^{\circ}C$ difference) caused the formation of thin foam during hydrogen release. Suppression of by-products and thin foam formation during hydrogen release is suggested as critical issues to realize chemical hydrogen storage system with ammonia borane.

• Macromolecular Research
• /
• 제8권2호
• /
• pp.80-88
• /
• 2000

Biodegradable microspheres were prepared with poly(L-lactide-co-glycolide) (PLGA, 75 : 25 by mole ratio) by an oil/oil solvent evaporation method for the sustained release of anti-AIDS virus agent, AZT The microspheres of relatively narrow size distribution (7.6$\pm$ 3.8 ㎛) were obtained by controlling the fabrication conditions. The shape of microspheres prepared was smooth and spherical. The efficiency of AZT loading into the PLGA microsphere was over 93% compared to that below 15% for microspheres by a conventional water/oil/water method. The effects of Preparation conditions on the morphology and in vitro AZT release pattern were investigated. in vitro release studies showed that different release pattern and release rates could be achieved by simply modifying factors in the fabrication conditions such as the type and amount of surfactant, initial amount of loaded drug, the temperature of solvent evaporation, and so on. PLCA microspheres prepared by 5% of initial drug loading, 1.0% (w/w) of surfactant concentration, and 25$\^{C}$ of solvent evaporation temperature were free from initial burst effect and a near-zero order sustained release was observed. Possible mechanisms of the near-zero order sustained release for our system have been proposed.