• Resources Recycling
• /
• v.14 no.5 s.67
• /
• pp.3-12
• /
• 2005

In this paper the world wide patents on the recycle of used polystyrene were inspected. The trends and directions of on going and future technologies on this matter were analyzed. The range of search was limited in the open patents and in DB of U.S.A.(USPTO, DELPHION), Japan(PAJ), Europe(EPO), and Korea(KIPRIS). For the search condition the keyword, polystyrene or PS, and IPC classification, B29-017 and C08J-011 were used. The total of 534 cases was selected and analyzed according to years, countries, companies, and technologies.

• Journal of Environmental Science International
• /
• v.24 no.9
• /
• pp.1221-1231
• /
• 2015

The present study was conducted to find a way to recycle the coir substrate by investigating changes in its physical and chemical properties based on the number of use year. Specific gravity of unused coir substrate was $0.212g/cm^3$, while it was higher for the substrate used for 2 years. Porosity was different depending on the number of use year. The porosity of unused substrate was 51.9%, but it increased to 68.6% after used for 2 years. In general, physical and chemical properties were better in the coir substrate used for 2 years than in unused one. The number of leaves, leaf area, flesh weight and dry weight of oriental cabbage and lettuce were higher in coir substrate used for 2 years than those in unused one. Whereas, no significant difference was observed between the substrates used for one year and 2 years, indicating that the one time-used wast substrate could be recycled for cultivating vegetables. Growth of the vegetables was improved when organic fertilizer composed of complex organics with different mixing ratios was provided to the coir substrate, compared to untreated plot. The optimum mixing ratio of the wast substrate and complex organics was 2:8(v/v) for fertilization using wast coir substrate. Therefore, coir substrate generally wasted after being used for one time was reuseable by supplying organic fertilizer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.50-53
• /
• 2003

CMP (chemical mechanical polishing) process remained to solve several problems in deep sub-micron integrated circuit manufacturing process. especially consumables (polishing pad, backing film, slurry, pad conditioner), one of the most important components in the CMP system is the slurry. Among the composition of slurries (buffer solution, bulk solution, abrasive particle, oxidizer, inhibitor, suspension, antifoaming agent, dispersion agent), the abrasive particles are important in determining polish rate and planarization ability of a CMP process. However, the cost of abrasives is still very high. So, in order to reduce the high COO (cost of ownership) and COC (cost of consumables) in this paper, we have collected the silica abrasive powders by filtering after subsequent CMP process for the purpose of abrasive particle recycling. And then, we have studied the possibility of recycle of reused silica abrasive through the analysis of particle size and hardness. Also, we annealed the collected abrasive powders to promote the mechanical strength of reduced abrasion force. Finally, we compared the CMP characteristics between self-developed KOH-based silica abrasive slurry and original slurry. As our experimental results, we obtained the comparable removal rate and good planarity with commercial products. Consequently, we can expect the saving of high cost slurry.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.669-678
• /
• 2014

The amount of waste water generated from the domestic sources is consistently increasing in proportion to economic growth, and the conventional activated sludge process is widely being used for general waste water treatment. But the ministry of environment becomes stringthent treatment standards of N and P (less than 20mg/L of N, 2mg/L of P) to prevent the eutrophication of lake water, and therefore highly advanced treatment technology is required not only in the existing treatment plants where the activated sludge process is being used, but also in newly constructed treatment plants for the treatment of N and P. This study is aimed at highly operating the engineering technology method was developed by domestic to eliminate N and P at the same time. Experiments were conducted in the treatment plant located in Yong In city. The bioreactor was started from the principal equipment for the elimination of N and P and the elimination of organic compounds. It consists of an internal recycle piping from the end of the aerobic tank to the anoxic tank and external recycle piping from the final settling basin to the denitrification tank. By experiment of 4 types separate inflow of waste water to the denitrification tank and the anaerobic tank, and changes in staying time at the anoxic tank and the aerobic tank, the elimination of organic compounds in each type and the relationship in the efficiency between the elimination of N and P were researched.

• KSBB Journal
• /
• v.25 no.5
• /
• pp.453-458
• /
• 2010

The magnetically separable polyaniline nanofiber enzymes were developed for the recycle of enzyme and enhanced enzyme stability. The stability of enzyme was maintained over 90% for 8 days under room temperature and vigorous shaking conditions (200 rpm). The residual activity of immobilized enzyme was over 60% after 8 days incubation at $55^{\circ}C$. Glucose was produced from various polysaccharides, agarose, curdlan, cellulose, and sea weed, using magnetically separable immobilized enzyme. Glucose production rate with curdlan was 1.2 g/(l h) and showed high decomposition rate due to high mass transfer. After 10 times recycle, the residual activity of immobilized enzyme was over 75%. 1 g/L of glucose was produced with 5 mg of immobilized enzymes.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.154-159
• /
• 2007

Biodegradation of Quinoline by free and immobilized Bacillus brevis has been investigated. The rate of quinoline degradation by immobilized Bacillus brevis on coconut shell carbon is faster than the rate by the microorganism immobilized on foam pieces and free cells. A complete removal of 100 ppm of Quinoline in the sample was achieved at a hydraulic retention time of 20 hours with the biocatalyst prepared by immobilizing Bacillus brevis onto coconut shell carbon. The biocatalyst had a reasonable shelf life and desirable recycle capacity.

• Journal of Life Science
• /
• v.9 no.2
• /
• pp.40-43
• /
• 1999

In the wastewater treatment experiment by anaerobic-aerobic packed bed unit, it was found that the high and stable removal efficiency of nitrogen could be obtained. The extent of nitrogen removal gradually decreased with the rise of recycle ratio and DO concentration. On the other hand, the extent of phosphorus increased with the increase of DO concentration. COD showed high removal efficiency over the entire range tested. The simulation of T-N behavior was carried out satisfactorily by using the kinetic equations for biofilm and the reactor model which considered the packed bed as a plug flow reactor.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.715-718
• /
• 2001

This study uses traditional alum coagulation and sedimentation process to treat CMP wastewater from cleaning after polishing. The primary goal is to successfully recycle both solid fines and water for semiconductor manufacturing. Results indicated that CMP wastewater may be successfully treated to recover clean water and fine particles by alum coagulation. The optimum operating conditions for coagulation are as fellowing: alum dosage of 10 ppm, pH at 5, rapid mixing speed at 800 rpm, 5 min rapid mixing time, and long slow mixing time. The treated water with low turbidity and an average residual aluminum ion concentration of 0.23 ppm may be considered for reuse. The settled sludge after alum coagulation contains mainly SiO$_2$particle with a minor content of aluminum (1.7 wt%) may be considered as raw materials for glass and ceramic industry.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.11
• /
• pp.551-555
• /
• 2004

In this paper, in order to reduce the high COO (cost of ownership) and COC (cost of consumables), we have collected the silica abrasive powders by filtering method after subsequent CMP (chemical mechanical polishing) process for the purpose of abrasives recycling. And then, we have studied the possibility of recycle of reused silica abrasive through the analysis of particle size distribution and FE-SEM (field emission-scanning electron microscope) measurements of abrasive powders. It was annealed the collected abrasive powders to promote the mechanical strength of reduced abrasion force. Finally, we compared the CMP characteristics between self-developed KOH-based silica abrasive slurry and original slurry. As our experimental results, we obtained the comparable rate of removal and good planarity with commercial products. Consequently we can expect the saving of high cost slurry.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.2899-2904
• /
• 2009

Esterification is an important class of reactions in the preparation of perfumery and flavor chemicals, wherein homogeneous, solid acidic, and superacidic catalysts are normally used. Now, an efficient and selective protocol for protection of various functionalized alcohols employing carboxylic acids as protecting agents is realized through the catalytic mediation of simple heteropolyoxometallates. In this methodology, water is the only by-product and notably the aspect of effluent treatments does not arise. The advantages include the operational simplicity, recycle ability of the catalyst and mild reaction conditions. The present catalytic system may be a potential candidate not only for laboratory practice but also for commercial applications and offers an environmentally safer alternative to the existing processes.