• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.795-801
• /
• 2012

Nanoparticles have received significant attention because of their unusual characteristics including high surface area to volume ratios. Thiol ligand have been used as stabilizers of metal nanoparticles since Brust et al. They reported the preparation method of ligand capped metal nanoparticles by protecting the nanoparticles with a self-assembled monolayer of dodecanethiolate. In this method, volatile organic compounds (VOCs) were used as sovents. This study was carried out to replace these VOCs with room temperature ionic liquids (RTILs). We used two type of ILs to prepare metal nanoparticles. One is a hydrophobic IL, [BMIM][[$PF_6$] (1-Butyl-3-methylimidazolium hexafluorophosphate) purchased from IL maker, C-Tri from Korea and the other one is a hydrophilic one, [BMIM][Cl] (1-Buthy-3-methylimdazolium chloride) sinthesized by us. In the case of preparing Ag and Au nanoparticles using [BMIM][Cl], we didn't use phase transition reagents and ethanol because it has hydrophilic property and preparing Au, Ag nanoparticles using [BMIM][[$PF_6$] the method is as same as Brust et al.'s except using [BMIM][[$PF_6$] instead of organic solvent because it has hydrophobic property. FT-IR and UV-vis, TEM, TGA analysis have been used in an attempt to determine the particle size and verify functional groups. The particle size obtained from TEM was very similar to those obtained by Brust et al. This is a clear example of ligand capped metal nanoparticles prepared using ionic liquids. And the experimental result demonstrated ionic liquids can act as a highly effective medium for the preparation and stabilization of gold and silver metal nanoparticles.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.5
• /
• pp.559-569
• /
• 2007

The purposes of this study were to find the main foulant of membrane and the optimal chemical cleaning method for MF(microfiltration) drinking water treatment system using D dam water as water source. The MF pilot plant which can treat maximum $500m^3/d$ consisted of 3 racks and was operated for 10 months under various operation conditions. After 10 months operation, $1^{st}$ and $2^{nd}$ rack of membrane pilot plant system were cleaned chemically and the degree of the restoration of the fouled membrane in terms of the pure water flux was detemnined. Inorganic compounds which contained in chemical cleaning waste was analyzed by Inductively Coupled Plasma (ICP). One membrane module for 3rd rack was disjointed and membrane fouling materials, especially inorganic compounds were investigated by Electron Probe Microanlysis (EPMA) to elucidate the reason of TMP increase. And also, the various chemical reagents (1N HCl or $H_2SO_4$, oxalic acid as acid and 0.3% NaOCl as alkali) were tested by combination of acid and alkali to determine the optimal chemical cleaning method for the MF system using micro-modules manufactured using the disjointed module. It was verified that the inside and outside of membrane module was colorized with black. As a result of the quantitative and semi-qualitative analysis of membrane foulant by ICP, most of inorganic foulant was manganese which is hard to remove by inorganic acid such as HCI. Especially, it was observed by EPMA that Mn was attached more seriously in inside surface of membrane than in outside surface of that. It was supposed that Mn fouling in inside surface of membrane might be caused by the oxidation of soluble manganese (Mn(II)) to insoluble manganese ($MnO_2$) by chlorine containing in backwashing water. The optimal cleaning method for the removal of manganese fouling was consecutive cleaning with the mixture of 1N HCl and 1% of oxalic acid, 0.3% NaOCl, and 1N HCl showing 91% of the restoration of the fouled membrane.

• Applied Chemistry for Engineering
• /
• v.27 no.3
• /
• pp.227-238
• /
• 2016

This review article highlights different types of nano-sized catalysts for the selective alcohol oxidation to form aldehydes (or ketones) with supported or immobilized metal nanoparticles. Metal nanoparticle catalysts are obtained through dispersing metal nanoparticles over a solid support with a large surface area. The nanocatalysts have wide technological applications to industrial and academic fields such as organic synthesis, fuel cells, biodiesel production, oil cracking, energy conversion and storage, medicine, water treatment, solid rocket propellants, chemicals and dyes. One of main reactions for the nanocatalyst is an aerobic oxidation of alcohols to produce important intermediates for various applications. The oxidation of alcohols by supported nanocatalysts including gold, palladium, ruthenium, and vanadium is very economical, green and environmentally benign reaction leading to decrease byproducts and reduce the cost of reagents as opposed to stoichiometric reactions. In addition, the room temperature alcohol oxidation using nanocatalysts is introduced.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.91-97
• /
• 2010

As nuclear power plants are getting older, interests on a decontaminating process are increasingly attracting more attention. Chemical decontamination is crucial to lower the production of radioactive waste and radiation dose rate. Prior to this, oxidizers and detergents for target material should be chosen so as to decontaminate major systems and components of a nuclear power plant chemically. In order to decontaminate it properly, it is crucial to have information about the chemical composition and crystalline structure of CRUD, analyzing its samples from the target or the decontamination system with components. However, there is no program which enables the extraction of samples directly from the object or the decontamination system with components carrying genuine radioactivity. Therefore, it is limited to samples from corrosion products carrying partial radioactivity as a resource. The composition of CRUD varies considerably depending on refueling cycle because it is closely related to the constituent of basic material. After settling a target, it is crucial to analyze and obtain analytical information about CRUD as a decontamination target. In this paper, various technologies for manufacturing simulated CRUD are introduced as alternatives to unattained samples. A metal oxide or metal hydroxide was used to synthesize simulated cruds having chemical compositions and crystalline stricture similar to the actual one by 12 different methods. CRUD 4(metal oxides in the autoclave vessel) and CRUD 10(metal oxides in a crucible after hydrazing pretreatment)were chosen as the best method for Type 1 and Type 2.respectively. As these CRUD can be synthesized easily without using any specialized equipment or reagents in a short time and in large quantities, they are expected to stimulate the development of decontaminating agents and processes.

• Journal of Environmental Health Sciences
• /
• v.23 no.3
• /
• pp.109-120
• /
• 1997

The purpose of this study is to evaluate the effectiveness of wastewater treatment containing surfactant. For that, comparative analysis of effectiveness of Featon Oxidation, Aluminum Sulfate, PAC (Poly Aluminum Chloride) on the treatment of the synthetic wastewater containing LAS (Linear Alkyl Sulfate), a main component of the commercial detergent was carried. Then, the optimum pH, the dosage of reagents, and the concentration of the LAS in each treatment were determined. The results of the study were summarized as following. 1. In Fenton Oxidation, optimal pH was 3 and 97.92% removal of LAS was achieved. However, the increase of the pH reduced the efficiency of LAS removal. The proper chemical dosages of FeSO$_4$ and $H_2O_2$ were 300 mg/l and the increase of dosages didn't affected the removal efficiency. Therefore, it was concluded that the economic chemical dosage was 300 mg/l of FeSO$_4$ and $H_2O_2$. 2. In case of Alum treatment, optimal pH was 11 with 61.13% removal efficiency. At other pH range, the removal efficiency was very low indicating that removal efficiency is greatly influenced by pH. The proper chemical dosage was 200 mg/l with the removal efficiency of 77.65%. The increase of chemical dosage, however, reduced the removal efficiency. 3. In case of using PAC, optimal pH was 6 with 97.99% removal efficiency. The result showed that wastewaters containing surfactant were almost completely removed at pH 6 by PAC. Removal efficiency was decreased by increasing PAC dosage higher than 400 mg/l and dosage over 700 mg/l of PAC abolished the treatment. 4. The comparative analysis of three methods revealed that the effective pH ranges were at pH 2-5 with Fenton oxidation, at pH 6-11 with PAC, and pH 11 with Alum. The removal efficiencies at these pH were 83.95-97.92%, 75.98-97.99% and 61.13%, respectively. 5. Increase in LAS concentration reduced the removal efficiencies of all three methods. In the case of PAC or Alum treatment, treatment abolished at LAS concentration higher than 700 mg/l.

• Microbiology and Biotechnology Letters
• /
• v.14 no.2
• /
• pp.145-153
• /
• 1986

For the inactivation of venoms, the chemical methods are generally applied. In the chemical method many works have been carried out with the chemical reagents and immunological antiserums. However, all inhibitory effect of these chemicals acting on snake venomes may well be due not to the specific, but to the nonspecific inhibitory action. Therefore, it is necessary to separate venom into its compositional active proteins and develop specific inhibitor which acts on the each protein. Until now, there have not been any reports about the substance which acts on snake venom as a specific inhibitor. Recently in 1979, we had actually isolated a specific venom inhibitor(ISV) which has a strong inhibitory activity against the proteinase of snake venom of Colubridae. In our experiments described here, a strain of Aspergillus sp., isolated from soil, was able to produce a biological active substance. The partial crystallized substance had a strong inhibitory activity against hemorrhagic action of snake venom of Colubridae. For the inhibitory action of the sample on the lethality of venom, the substance prevented completely the lethal action of the hemorrhagic factor when they were treated with enough amount of the substance. The edema factor of whole venom of Agristrodon bromohoffi brevicaudus was completely inhibited, but those of HR-I and HR-II of Trimeresurus flavoviridis venom were inhibited about 50%, when they were treated with the substance of half amount of venom. On the other hand, from the result of subcutaneous hemorrhage in a rabbit, it was concluded that two kinds of antihemorrhagic substance might be produced by the strain used in this work.

• The Korean Journal of Pesticide Science
• /
• v.4 no.1
• /
• pp.11-18
• /
• 2000

This study was conducted to establish an efficient screening method of membrane-disrupting herbicides, based on the result that membrane leakage leading to evolution of carbonyl compounds and aldehydes could be colorimetrically assessed by formation of stable chromophores with MBTH and ferric chloride. Assay conditions including plant material, light intensity, irradiation time, concentrations of reagents for colorization, and reaction time were optimized, and activities of different types of known herbicides were investigated with cucumber cotyledon discs. That result indicated that this assay was sensitive to membrane-disrupting herbicides, such as protoporphyrinogen oxidase inhibitors (acifluorfen, oxyfluorfen, oxadiazon) and an electron interceptor from photosystem I(paraquat). With seven compounds newly synthesized, highly positive correlation was observed between herbicidal activities measured by greenhouse bioassay and MBTH method. Because only a single disc(4 mm diameter) from cucumber cotyledon in 60 ${\mu}L$ of incubation solution was required to assay, a large number of herbicides could be tested simultaneously using 96-well microtitre plates. But the assay efficiency is not likely to significantly increase because of the boiling step during the reaction.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.10
• /
• pp.1077-1084
• /
• 2009

A genomic library was constructed to clone a xylanase gene (Mxyn10) from Demequina sp. JK4 isolated from a deep sea. Mxyn10 encoded a 471 residue protein with a calculated molecular mass of 49 kDa. This protein showed the highest sequence identity (70%) with the xylanase from Streptomyces lividans. Mxyn10 contains a catalytic domain that belongs to the glycoside hydrolase family 10 (GH10) and a carbohydrate-binding module (CBM) belonging to family 2. The optimum pH and temperature for enzymatic activity were pH 5.5 and $55^{\circ}C$, respectively. Mxyn10 exhibited good pH stability, remaining stable after treatment with buffers ranging from pH 3.5 to 10.0. The protein was not significantly affected by a variety of chemical reagents, including some compounds that usually inhibit the activity of other related enzymes. In addition, Mxyn10 showed activity on cellulose. These properties mark Mxyn10 as a potential enzyme for industrial application and saccharification processes essential for bioethanol production.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.5
• /
• pp.612-619
• /
• 2000

To investigate the biochemical properties of V. mimicus metalloprotease, whose gene was isolated previously from Vibrio mimicus ATCC33653, overexpression and purification were attempted. The 1.9 kb of open reading frame was amplified by PCR from pVMC193 plasmid which ligated the VMC gene with pUC19 and introduced into Escherichia coli BL21 (DE3) using the overexpression vector, pET22b (+). The overexpressed metalloprotease (VMC) was purified with Ni-NTA column chromatography and characterized with various protease inhibitors, pHs, temperatures, and substrates. The purified VMC showed the proteolytic activity against gelatin, soluble and insoluble collagens, and synthetic peptides. Unlike the observations made with all metalloproteases originated from other Vibrio sp., the VMC did not hydrolyze the casein. The proteolytic activity was critically decreased when the VMC was treated with metal chelating reagents, such as EDTA, 2,2-bipyridine, and 1, 10-phenanthroline. In particular, the 71 kDa VMC exhibited the hemagglutinating activity against human erythrocyte. As the purified VMC was treated with $CuCl_2$ and $NiCl_2$ for the chemical modification of metal binding, the proteolytic activity and hemagglutinating activity were profoundly influenced. The multialignment analysis made on the reported Vibrio metalloproteases showed the difference of amino acid sequence similarity between the two distinctive classes of Vibrio metalloproteases.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.9
• /
• pp.1196-1206
• /
• 2014

A metagenomic fosmid library was constructed using genomic DNA isolated from the gut microflora of Hermetia illucens, a black soldier fly. A cellulase-positive clone, with the CS10 gene, was identified by extensive Congo-red overlay screenings for cellulase activity from the fosmid library of 92,000 clones. The CS10 gene was composed of a 996 bp DNA sequence encoding the mature protein of 331 amino acids. The deduced amino acids of CS10 showed 72% sequence identity with the glycosyl hydrolase family 5 gene of Dysgonomonas mossii, displaying no significant sequence homology to already known cellulases. The purified CS10 protein presented a single band of cellulase activity with a molecular mass of approximately 40 kDa on the SDS-PAGE gel and zymogram. The purified CS10 protein exhibited optimal activity at $50^{\circ}C$ and pH 7.0, and the thermostability and pH stability of CS10 were preserved at the ranges of $20{\sim}50^{\circ}C$ and pH 4.0~10.0. CS10 exhibited little loss of cellulase activity against various chemical reagents such as 10% polar organic solvents, 1% non-ionic detergents, and 0.5 M denaturing agents. Moreover, the substrate specificity and the product patterns by thin-layer chromatography suggested that CS10 is an endo-${\beta}$-1,4-glucanase. From these biochemical properties of CS10, it is expected that the enzyme has the potential for application in industrial processes.