• Current Photovoltaic Research
• /
• v.6 no.3
• /
• pp.81-85
• /
• 2018

The photovoltaic modules installed in the actual field are affected by various external environments and the electrical performance output value is generally lowered compared to initial output value. The most of photovoltaic modules consists of low iron glass, encapsulant (EVA), back sheet, frame and junction box assembly based on the solar cells. In this paper, the characteristics of encapsulant which is an important constituent material of photovoltaic module were verified by maximum power determination, electro luminescence images, yellowness index measurement, and gel content measurement after ultraviolet (UV) irradiation exposure. The most commonly installed 72 cells crystalline photovoltaic modules were tested after various UV exposure of 0, 15, 30, and $60kWh/m^2$ and compared with the reference module. After UV exposure of $15kWh/m^2$, which is the current international test condition, a small amount of change was observed in yellowness index and electroluminescence, while a gell content rapidly increased. At a cumulative dose of $60kWh/m^2$, which will be a new international test condition in the near future, however, the yellowness index increased sharply and showed the greatest output power drop.

• Journal of Environmental Impact Assessment
• /
• v.21 no.5
• /
• pp.631-648
• /
• 2012

The integrative ecological approaches of chemical assessments, physical habitat modelling, and multi-metric biological health modelling were applied to Gwanpyeong Stream within Gap-Stream watersheds to evaluate environmental impacts on the constructions of residential and commercial complex. For the analysis, the surveys conducted from 45 sites of reference streams within the Gap-Stream watershed and 3 regular sites during 2009 - 2010. Physical habitat health, based on the habitat model of Qualitative Habitat Evaluation Index(QHEI) declined from the headwaters(good - fair condition) to the downstream(poor condition). Chemical water quality, based turbidity and electric conductivity(EC), was degraded toward to the downstream, and especially showed abrupt increases, compared to the values of control streams(CS). Also, concentrations of chlorophyll-a in the downstreams were greater compared to the control stream(CS), indicating an eutrophication. Biological health conditions, based on the Index of Biological Integrity(IBI) using fish assemblages, averaged 19.3 which is judged as a fair condition by the biological criteria of the Ministry of Environment, Korea. The comparisons of model metric values in sensitive species and riffle-benthic species on the Maximum Species Richness Line(MSRL) of 45 reference streams indicated a massive disturbances in all sampling locations. Also, tolerance guild and trophic guild analyses suggest that dominances of tolerant species and omnivores were evident, indicating a biological degradation by habitat disturbances and organic matter pollutions. There was no distinct longitudinal variations of IBI model values from the headwater to the downstream in spite of slight chemical and habitat health gradients among the sampling sites. Overall, integrative ecological health(IEH) scores, based on the chemical, physical, and biological parameters, were low compared to the 45 reference streams due to physical and chemical disturbances of massive constructions of the residential and commercial complex. This stream, thus showed a tendency of typical urban streams which are disturbed in the chemical water quality, habitat structures, and biological integrity. Effective stream management plans and restoration strategies are required in this urban stream for improving integrative stream health.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.388-394
• /
• 2014

Inorganic-organic hybrid coating solutions were synthesized using titania sol from titanium isopropoxide (TTIP) as an inorganic component and mixture of two or three types of silane coupling agents, such as methacryloxypropyl trimethoxysilane (MPTMS), aminopropyl triethoxysilane (APS), glycidoxypropyl trimethoxysilane (GPTMS) and vinyltriethoxysilane (VTES) as an organic component. The hard coating films were obtained by spin-coating on the polycarbonate sheets and curing the inorganic-organic hybrid coating solutions. The coating films made from the mixture of two types of silane coupling agents showed poor pencil hardness and adhesion, while those from the mixture of three types of silane coupling agents exhibited an improved pencil hardness of 2H~4H and adhesion of 5B. The refractive indexes of coating films were increased from 1.56 to 1.63 at 550 nm by increasing the content of titania sols from 20 to 30 g.

• Food Science of Animal Resources
• /
• v.21 no.2
• /
• pp.97-102
• /
• 2001

The characteristic fitness of food to each Sa-sang constitution and the relationship between Han-Yeoul characteristics and chemical composition after classifying Samgye-tang ingredients and other food into Ohn-Yeoul-Ryang-Han characteristic were assessed. When the suitable constitution to the each characteristic was investigated after classifying Samgye-tang ingredients and other food into Han, Ryang, Pyound, Ohn and Yeoul of which fitness case for Soeumin was 44∼63% but fitness case for Soyangin and Taeyangin was only 0∼18%. When the relationship between Samgye-tang ingredients and other food classified into Ohn-Yeoul-Ryang-Han and chemical composition of fatty acid, amino acid, vitamin and mineral was investigated, the value of correlation coefficient was extremely low. There was not the relationship between chemical composition and Han-Yeoul classification. Therefore it should be further investigated the relationship between characteristic and chemical composition by additional analysis index.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.339-340
• /
• 2002

Natural castor oil was chemically reconstructed to extend the carbon chains by means of iso-reaction so as to improve the rheological behavior, by way of increasing the viscosity index and decreasing the pour point. The rheological and tribological characteristics of the reconstructed castor oil were comparatively investigated with those of the natural castor oil and several other vegetable oils and a mineral oil. The friction and wear test results on a four-ball machine indicate that the chemically reconstructed castor oil has considerably improved rheological and tribological properties as compared with the natural castor oil. It shows a greatly increase viscosity index and largely decreased pour point, which makes it applicable to low temperature lubrication. The chemically reconstructed castor oil even shows better tribological behavior than pentaerythritol ester or di-iso-capryl sebacate. However, it is still needed to increase the oxidation stability of the reconstructed castor oil.

• Journal of the Korean Chemical Society
• /
• v.56 no.1
• /
• pp.20-27
• /
• 2012

Complex permittivity spectra of Allyl Chloride (AC), 2-Butanone (2-BU) and their binary mixtures over the entire range of concentration were obtained using the Time Domain Reflectometry (TDR) technique in microwave frequency range at various temperatures. Static dielectric constant and relaxation time are obtained from complex permittivity spectra. Density ($\rho$) and refractive index ($n_D$) are also measured. These parameters are used to determine excess dielectric constant, excess inverse relaxation time, excess molar volume, excess molar refraction, polarity, Bruggeman factor and thermodynamic parameters viz. enthalpy of activation and entropy of activation. The values of static dielectric constant and relaxation time increases while density and refractive index decreases with the percentage of 2-Butanone in Allyl Chloride increases. Excess parameters were fitted to a Redlich-Kister equation.

• Korean Journal of Organic Agriculture
• /
• v.6 no.2
• /
• pp.75-80
• /
• 1998

Organically cultured rice fields were surveyed to compare the population density and the structure of microarthropod communities between chemically controlled and un-controlled fields. In rice fields, microarthropod communities were also compared among four treatments based on different input of fertilzer : 1)No fertilizer, 2)Chemical fertilizer(N-P2O5-K2O = 11 - 7 - 8 kg/10a, 3) Compost (5,000kg/10a), 4) Compost com-plemented with chemical N. Richness index of microarthropod communities in rice fields was greater in the chemically uncontrolled field than controlled field. Within field. the compost plot had greater value of richness index for microarthopod commuities than the non-fertilizer polt. A total of 9 aquatic insects species were identified in the water of organic farming rice field the population density was found to be higher in the compost plot than the other plot. The population of insect pests was found to be high in the late stage of plant whereas the population of insects was high in the early stage of rice plant.

• Tribology and Lubricants
• /
• v.11 no.2
• /
• pp.1-7
• /
• 1995

Viscosity index is an arbitray number used to characterize the variation of lubricant viscosity with respect to temperature. It is well recognized in the oil industry that as refining severity increases, lubricant VI increases. Consequently, VI is often perceived as a measure of lubricant quality. Futhermore, a 95 VI minimum specification is commonly imposed in marketing base stocks. These factors provide the incentitive for this study to carefully analyze VI definition and two component viscosity blending techniques to investigate how they affect VI change, and finally to examine possible avenues to produce 95+VI base stocks by blending sub-95 VI base stocks.

• Journal of the Korean Society of Tobacco Science
• /
• v.26 no.2 s.52
• /
• pp.135-140
• /
• 2004

To evaluate utilization of tobacco dust as a raw material of reconstituted tobacco, tobacco dust was applied to the paper-making reconstituted tobacco process and we examined the chemical and physical properties of the reconstituted tobacco and raw materials. The use of tobacco dust in the manufacture of reconstituted tobacco had no measurable adverse effects on the chemical properties of the reconstituted tobacco when added to the reconstituted tobacco formula at levels of $3\%,\;5\%,\;7\%\;and\;10\%$ instead of foreign bright stem. Filling power and fragibility index of the reconstituted tobacco was slightly decreased with increasing tobacco dust levels, but it was not significant change. However, when the level of $10\%$ tobacco dust was added to the reconstituted tobacco formula, the tensile index based basis weight was rapidly decreased.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.11
• /
• pp.891-895
• /
• 2010

Polymer dispersed liquid crystal (PDLC) films were prepared by the phase separation method using the liquid crystal (E7) and prepolymers. This work investigated the electro-optical characteristics of various PDLC films. In order to have good contrast ratio, the polymer refractive index must be adjusted to the ordinary refractive index of the liquid crystal. The driving voltage of PDLC films were mainly affected by elastic deformation. E7-Ebecryl810-IOA-TMPTA-HMPPO system had good threshold voltage and driving voltage and E7-Ebecryl810-EHA-PEGDA-HMPPO system had good contrast ratio.