• Journal of Applied Biological Chemistry
• /
• 제54권3호
• /
• pp.178-183
• /
• 2011

생강나무 목부를 80% methanol로 추출, 농축하였으며, 얻어진 추출물을 ethyl acetate (EtOAc), butanol (n-BuOH) 및 $H_2O$로 분배, 추출하였다. 이 중 EtOAc 분획과 n-BuOH 분획에 대하여 silica gel, octadecyl silica gel (ODS) 및 Sephadex LH-20 column chromatography를 반복 수행하여 2종의 lignan과 3종의 flavonoid 화합물을 분리하였다. 분리한 화합물의 구조는 NMR, MS 및 IR 등의 스펙트럼 데이터를 해석하여 asarinin (1), (+)-catechin (2), (-)-epicatechin (3), hyperin (4) 및 nudiposide (5)로 구조 동정하였다. Asarinin (1)과 nudiposide (5)는 생강나무에서 이번에 처음으로 분리되었다.

• 펄프종이기술
• /
• 제29권1호
• /
• pp.73-83
• /
• 1997

Most of the materials used in various industrial fields and also in our daily life are multi-component materials or composite materials, and it is well known that there are many cases where adhesion between the constituents within the bonded systems plays an important role. There are various types of performance evaluation tests for the bonded materials, among which tests for evaluating the bond performance under various conditions may be regarded as the most interesting ones for those engaged in work related to adhesion. I have studied on the mechanism of adhesion form the rheological standpoint with my colleagues, including some students from Korea, and I am very happy to be able to have a talk on some of our research works. In Japan, the so-called "adhesives" are usually classified into two categories;adhesives and pressure sensitive adhesives (PSA). Adhesives are the materials which solidify after bonding and are after used as the structural adhesives because the adhesive strength is comparatively strong. On the other hand, the pressure sensitive adhesives never solidify and are used as PSA tapes, labels or decals. About the adhesives, we have examined the dependence of adhesive strength(shear, tensile, peel) upon both temperature and rate of deformation, and found out some empirical rules which are applicable to most of the adhesive systems. We have also developed a simplified theory of adhesion, which is deseribed in terms of mechanical equivalent mode1 and a few failure criteria. Although some of the common rules can be accounted for according to this theory, it must be pointed out that a fracture mechanical approach ms inevitable especially in the region where the meehanical relaxation time of the adhesive is extremely large [W. W. Lim and H. Mizumachi]. About the pressure sensitive adhesives, we have studied on the PSA performance (peel, tack, holding power) as a function of both the viscoelastic properties and surface chemical properties of the materials, and found out some rules, and again we have developed a theory which deseribes the mechanism. And in addition, we have studied on the miscibility between linear polymers and oligomers, because PSA is generally manufactured by blending gums and tackifier resins. Many phase diagrams have been found and some of them have been analyzed on thermodynamic basis, and it became evident that the miscibility is a very important factor in PSA [H. J. Kin and H. Mizumachi]. In this presentation, I want to emphasize the fact that the adhesion performance is closely related to the structure/property of the adhesives.adhesives.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.27-27
• /
• 2011

For the design of real applicable molecular devices, current-voltage properties through molecular nanostructures such as metal-molecule-metal junctions (molecular junctions) have been studied extensively. In thiolate monolayers on the gold electrode, the chemical bonding of sulfur to gold and the van der Waals interactions between the alkyl chains of neighboring molecules are important factors in the formation of well-defined monolayers and in the control of the electron transport rate. Charge transport through the molecular junctions depends significantly on the energy levels of molecules relative to the Fermi levels of the contacts and the electronic structure of the molecule. It is important to understand the interfacial electron transport in accordance with the increased film thickness of alkyl chains that are known as an insulating layer, but are required for molecular device fabrication. Thiol-tethered RuII terpyridine complexes were synthesized for a voltage-driven molecular switch and used to understand the switch-on mechanism of the molecular switches of single metal complexes in the solid-state molecular junction in a vacuum. Electrochemical voltammetry and current-voltage (I-V) characteristics are measured to elucidate electron transport processes in the bistable conducting states of single molecular junctions of a molecular switch, Ru(II) terpyridine complexes. (1) On the basis of the Ru-centered electrochemical reaction data, the electron transport rate increases in the mixed self-assembled monolayer (SAM) of Ru(II) terpyridine complexes, indicating strong electronic coupling between the redox center and the substrate, along the molecules. (2) In a low-conducting state before switch-on, I-V characteristics are fitted to a direct tunneling model, and the estimated tunneling decay constant across the Ru(II) terpyridine complex is found to be smaller than that of alkanethiol. (3) The threshold voltages for the switch-on from low- to high-conducting states are identical, corresponding to the electron affinity of the molecules. (4) A high-conducting state after switch-on remains in the reverse voltage sweep, and a linear relationship of the current to the voltage is obtained. These results reveal electron transport paths via the redox centers of the Ru(II) terpyridine complexes, a molecular switch.

• 한국재료학회지
• /
• 제22권8호
• /
• pp.439-444
• /
• 2012

To compare the photocatalytic performances of titania for purification of waste water according to applied voltages and doping, $TiO_2$ films were prepared in a 1.0 M $H_2SO_4$ solution containing $NH_4F$ at different anodic voltages. Chemical bonding states of F-N-codoped $TiO_2$ were analyzed using surface X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of the co-doped $TiO_2$ films was analyzed by the degradation of aniline blue solution. Nanotubes were formed with thicknesses of 200-300 nm for the films anodized at 30 V, but porous morphology was generated with pores of 1-2 ${\mu}m$ for the $TiO_2$ anodized at 180 V. The phenomenon of spark discharge was initiated at about 98 V due to the breakdown of the oxide films in both solutions. XPS analysis revealed the spectra of F1s at 684.3 eV and N1s at 399.8 eV for the $TiO_2$ anodized in the $H_2SO_4-NH_4F$ solution at 180 V, suggesting the incorporation of F and N species during anodization. Dye removal rates for the pure $TiO_2$ anodized at 30 V and 180 V were found to be 14.0% and 38.9%, respectively, in the photocatalytic degradation test of the aniline blue solution for 200 min irradiation; the rates for the F-N-codoped $TiO_2$ anodized at 30 V and 180 V were found to be 21.2% and 65.6%, respectively. From the results of diffuse reflectance absorption spectroscopy (DRS), it was found that the absorption edge of the F-N-codoped $TiO_2$ films shifted toward the visible light region up to 412 nm, indicating that the photocatalytic activity of $TiO_2$ is improved by appropriate doping of F and N by the addition of $NH_4F$.

• Macromolecular Research
• /
• 제10권3호
• /
• pp.158-167
• /
• 2002

In order to endow with new bioactive functionality from small intestine submucosa (SIS) powder as natural source to poly (L-lactide) (PLA) and poly (lactide-co-glycolide) (PLGA) synthetic biodegradable polymer, porous SIS/PLA and SIS/PLGA as natural/synthetic composite scaffolds were prepared by means of the solvent casting/salt leaching methods for the possibility of the application of tissue engineered bone and cartilage. A uniform distribution of good interconnected pores from the surface to core region was observed the pore size of 40~500 ${\mu}{\textrm}{m}$ independent with SIS amount using the solvent casting/salt leaching method. Porosities, specific pore areas as well as pore size distribution also were almost same. After the fabrication of SIS/PLA hybrid scaffolds, the wetting properties was greatly enhanced resulting in more uniform cell seeding and distribution. Five groups as PGA non-woven mesh without glutaraldehyde (GA) treatment, PLA scaffold without or with GA treatment, and SIS/PLA (Code No.3 ; 1 : 12 of salt content, (0.4 : 1 of SIS content, and 144 ${\mu}{\textrm}{m}$ of median pore size) without or with GA treatment were implanted into the back of nude mouse to observe the effect of SIS on the induction of cells proliferation by hematoxylin and eosin, and von Kossa staining for 8 weeks. It was observed that the effect of SIS/PLA scaffolds with GA treatment on bone induction are stronger than PLA scaffolds, that is to say, in the order of PLA/SIS scaffolds with GA treatment > PLA/SIS scaffolds without GA treatment > PGA nonwoven > PLA scaffolds only with GA treatment = PLA scaffolds only without GA treatment for the osteoinduction activity. The possible explanations are (1) many kinds of secreted, circulating, and extracellular matrix-bound growth factors from SIS to significantly affect critical processes of tissue development and differentiation, (2) the exposure of SIS to GA resulted in significantly calcification, and (3) peri-implant fibrosis due to covalent bonding between collagen molecule by crosslinking reaction. In conclusion, it seems that SIS plays an important role for bone induction in SIS/PLA scaffolds for the application of tissue engineering area.

• 한국광학회지
• /
• 제3권4호
• /
• pp.258-265
• /
• 1992

저압화학기상증착법으로 Si 기판에 $P_{2}O_{5}-SiO_{2}$ 광도파박막계를 제작하였다. 제작된 박막의 광도파손실율은 1.65dB/cm이었으나 $1100^{\circ}C$에서 열처리한 뒤에는 0.1dB/cm 이하로 크게 감소하였다. 레이저 노광법과 활성이온식각법으로 광도파로를 제작하여 $1100^{\circ}C$에서 열처리하였다. 열처리 결과 도파로 코어의 모양은 사각형에서 반원형으로 바뀌었으며 0.6328$\mu$m에서 0.03dB/cm 그리고 1.53$\mu$m에서 0.04dB/cm의 낮은 도파손실율을 나타내었다. 도파로의 도파손실율이 감소하는 이유로는 고온 열처리과정에서 첫째 박막조직과 결합하여 광흡수를 일으키는 수소가 확산 방출되고 둘째 광산란을 일으키는 도파로의 거친 계면 및 박막조직이 재형성되며, 셋째 식각법으로 도파로를 만들때 생기는 도파로 코어의 거친 계면이 매끄럽게되어 도파광의 산란손실이 중어들기 때문으로 생각된다.

• Elastomers and Composites
• /
• 제46권3호
• /
• pp.195-203
• /
• 2011

친환경 소재인 바이오복합재료(bio-composites)의 제조를 위하여 기질 고분자로는 poly(lactic acid) (PLA)를 그리고 충전제(filler)로는 케나프 섬유(kenaf fiber)를 사용하였다. 또한 섬유와 고분자 사이의 계면결합 향상을 위해 아세틸화 케나프 섬유(acetylated kenaf fiber)와 상용화제(compatibilizer)를 첨가해 주었다. 본 연구에서는 화학처리와 상용화제가 기계적-점탄성과 형태학적 특성에 미치는 영향을 평가하였고, 섬유가 소수성이 될수록 기질 고분자와 높은 계면결합을 가지며 물성과 형태학적 성질 또한 향상된다는 결과를 보여줬다. 그러나 점탄성과 유리전이온도에는 큰 영향을 미치지 않는다는 사실을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제14권1호
• /
• pp.61-68
• /
• 2007

임베디드 PCB 기판내 유전체 재료인 Atomic Layer Deposition(ALD) $Al_2O_3$ 박막과 전극재료인 스퍼터 증착된 Cu박막 사이의 계면접착력을 $90^{\circ}$ 필 테스트방법으로 측정하여 순수 빔 굽힘을 가정한 에너지 평형 해석을 통하여 계면파괴에너지를 구하였다. $Cu/Al_2O_3$의 계면파괴에너지(${\Gamma}$)는 매우 약하여 측정할 수 없었으나, 접착력 향상층 Cr 박막을 삽입하여 $Cr/Al_2O_3$의 계면파괴에너지는 $10.8{\pm}5.5g/mm$를 얻었다. $Al_2O_3$ 표면에 $0.123W/cm^2$ 의 power density로 2분간 $Ar^+$ RF 플라즈마 전처리를 하고 Cr박막을 삽입한 $Cr/Al_2O_3$ 계면파괴에너지는 $39.8{\pm}3.2g/mm$으로 매우 크게 증가하였는데, 이는 $Ar^+$ RF 플라즈마 전처리에 따른 mechanical interlocking효과와 Cr-O 화학결합 효과가 동시에 기여한 것으로 생각된다.

• 전기화학회지
• /
• 제7권4호
• /
• pp.173-178
• /
• 2004

플라즈마 화학 기상 증착법으로 구리 막$(foil,\;35{\mu}m)$표면 위에 $SiH_4$와 Ar혼합가스를 공급하여 실리콘 박막을 증착 한 후 리튬 이온전지의 음극으로 활용하였다. 증착 온도에 따라 비정질 실리콘 박막과 copper silicide박막 형태의 다른 두 종류의 실리콘 박막 구조가 형성되는 것이 관찰되었다. $200^{\circ}C$ 이하의 온도에서는 비정질 실리콘 박막이 증착되었고, $400^{\circ}C$ 이상의 온도에서는 실리콘 라디칼과 확산된 구리 이온의 반응에 의한 그래뉼러 형태의 copper silicide박막이 형성되었다. 비정질 실리콘 박막은 copper silicide박막 보다 높은 용량을 나타냈으나 충·방전 반응에 의한 급격한 용량 손실을 나타냈다. 이것은 비정질 실리콘 박막의 부피 팽창에 의한 것으로 추정된다. 그러나 copper silicide 박막을 음극으로 사용했을 때는 copper silicide를 형성한 실리콘과 구리의 화학결합이 막 구조의 부피변화를 감소 시켜줄 뿐 아니라 낮은 전기 저항을 갖기 때문에 싸이클 특성이 향상되었다.

• 대한소아치과학회지
• /
• 제29권3호
• /
• pp.430-438
• /
• 2002

본 연구에서는 Prodigy(Kerr, USA), Vitalescence(Ultradent, USA), Z 250(3M, USA), Filtek flow(3M, USA)의 4종의 복합레진을 사용하여 각 제품의 분해저항성을 평가하고자 하였다. 무게손실, 표면하 분해층 깊이, 용출된 Si 농도를 기준으로 각 레진의 분해저항성을 평가하여 다음과 같은 결과를 얻었다. 1. 무게손실량은 Prodigy와 Vitalescence사이, Z 250과 Filtek flow사이에는 차이를 보이지 않았으며 전후 제품군 간에는 차이를 보였다(p<0.05). 2. 분해층 깊이는 Z 250, Filtek flow, Prodigy, Vitalescence순으로 감소하였으며, 네가지 제품간에는 유의한 차이를 보였다(p<0.05). 3. Si 용출량은 Filtek flow, Z 250, Prodigy, Vitalescence 순으로 감소하였으며, 각 제품 간에는 유의한 차이를 보였다(p<0.05). 4. 각 제품의 무게손실과 분해층 깊이 사이(r=0.714, p<0.05), 무게손실과 Si 용출량 사이(r=0.770, p<0.05), 분해층 깊이와 Si 용출량 사이 (r=0.930, p<0.05)에는 높은 상관관계를 보였다. 5. 주사전자현미경 관찰시 NaOH 용액에 보관한 후 레진 기질과 필러 사이의 결합의 파괴를 관찰할 수 있었다. 6. 공촛점 레이저 현미경 관찰시 NaOH용액에 보관한 후 레진의 분해층 깊이를 관찰할 수 있었다.