• 제목/요약/키워드: check time interval

검색결과 60건 처리시간 0.029초

항공 교통 상황 방송 서비스를 위한 중앙 집중형 TIS-B 서버 설계 및 구현 (Design and Implementation of Centralized TIS-B Server for Broadcasting Air Traffic Situation)

  • 송인성;장은미;최상방
    • 전자공학회논문지
    • /
    • 제52권2호
    • /
    • pp.27-39
    • /
    • 2015
  • 항공 수요가 지속적으로 증가함에 따라 레이더를 이용한 항공 감시가 한계에 다다르면서, 새로운 항공 감시 기술인 ADS-B가 등장하였다. ADS-B는 레이더에 비해 높은 위치 정확도와 빠른 갱신 주기를 제공하며, ADS-B 송수신기를 장착한 항공기간에는 서로의 위치 정보를 확인할 수 있다는 장점을 갖는다. 하지만 모든 항공기가 ADS-B 송수신기를 탑재하지는 않으며, 서로 다른 ADS-B 데이터 링크를 사용하는 항공기 간에는 위치 정보의 송수신이 불가능하다는 단점이 있다. 이러한 ADS-B의 단점을 해결하기 위해 레이더가 감시 중인 항공기의 정보를 방송하는 TIS-B 서비스와 ADS-B 데이터 링크를 교차하여 ADS-B 신호를 방송하는 ADS-R 서비스가 개발되었다. 본 논문에서는 ADS-B 감시 자료와 레이더 감시 자료를 통합하여 TIS-B 서비스와 ADS-R 서비스를 함께 제공할 수 있는 항공 교통 상황 방송 서비스용 중앙 집중형 TIS-B 서버를 설계하고 구현하였다. 구현한 시스템은 직접 구성한 ADS-B 지상 시스템과 연결하여, 비행 중인 항공기의 ADS-B 감시 자료와 레이더 감시 자료를 수신하고, 수신한 감시 자료를 이용하여 TIS-B 서비스와 ADS-R 서비스를 제공하기 위한 감시 자료를 생성하여 모의 방송을 하는 방법으로 검증하였다.

음식쓰레기의 퇴비화공정의 적정운전조건 검토 (The study of Efficient Treatment Conditions on the Composting of Foodwaste)

  • 강창민;김병만;정일현
    • 유기물자원화
    • /
    • 제11권2호
    • /
    • pp.117-124
    • /
    • 2003
  • 음식물쓰레기 이용 퇴비화의 운전 및 염분저감을 위한 적정조건 검토을 위한 연구를 수행하여 이하의 결과를 얻었다. 음식쓰레기와 톱밥을 7:3, 6:4, 5:5, 4:6, 3:7 비율로 혼합하여 실험한 결과 6:4에서 가장 안정화된 퇴비가 생산될 수 있었다. 한편 음식물쓰레기 : 톱밥의 혼합비가 7:3 및 음식물쓰레기 : 왕겨의 혼합비가 6.5 : 3.5 와 6:4의 경우는 초기 C/N비 자체가 낮게 나타나 적정 퇴비화를 이룩하기 어려웠다. Agent로 톱밥을 혼합한 경우와 왕겨를 혼합한 경우 모두 pH가 급격히 상승하다가 안정화되어 7.5~8.5를 유지하였다. 수분함량은 왕겨를 사용한 경우가 톱밥을 사용한 경우보다 수분감량율이 높게 나타나 톱밥보다 공극율 및 통기성이 원활함을 알 수 있었다. 따라서 톱밥대체제로 이용가능 했다. 탄소화합물 함량은 톱밥의 경우 음식물쓰레기의 혼합 비율이 낮을수록, 왕겨의 경우 음식물쓰레기의 혼합 비율이 높을수록 높았다. 유해성분(납외7종)은 비료기준치 이하를 나타내 안전한 것으로 판별되었다. 염분의 경우 0.43-0.46%을 나타내어 비료기준치(1%)의 1/2로 저감되었다. 이상의 결과를 종합해 보면 음식물쓰레기 퇴비화에 있어 음식물쓰레기와 Agent의 혼합비가 6:4 일 때, Agent로는 왕겨보다 톱밥을 혼합할 때 효율적인 것으로 나타났다.

  • PDF

공심형 선형동기전동기 기반의 궤도열차 추진제어에 관한 연구 (Study on a Propulsion Control of the Roller Coasters Train based on Air Cored Linear Synchronous Motor)

  • 조정민;한영재;이진호
    • 한국산학기술학회논문지
    • /
    • 제16권12호
    • /
    • pp.8187-8194
    • /
    • 2015
  • 고 중량의 궤도열차를 1G 포스이상 가속하기 위해서는 많은 추진력이 필요하다. 선형동기전동기(LSM)는 이러한 고 추력이 필요한 시스템에 적합하다. LSM의 추진 효율을 높이기 위해서 추진제어시스템은 정밀한 위상제어를 위한 실시간의 정확한 차량위치정보가 필요하다. 그러나 추진제어시스템은 전자석 길이구간마다 트랙에 설치되어져 있는 홀센서로부터 상대적으로 긴 시간간격을 갖는 불연속 위치정보를 수신하게 된다. 본 논문에서는 기존 d-q 방정식을 이용한 기본 전동기 모델을 구성하였다. LSM에 의해 추진되는 궤도열차의 모터모델은 코깅력과 마찰손실을 반영한 동적모델이다. 그리고 궤도열차용 LSM제어를 위해 차량위치 추정기를 기반으로 하는 추진제어 시스템을 제안하였다. 해당 궤도열차의 모터모델을 기반으로 위치관측기를 포함한 토크제어시스템의 특성을 확인하기 위해서 시뮬레이션을 수행하였다. 시뮬레이션 결과는 본 제어시스템이 선형화된 시뮬레이션 모델 분석으로부터 제어기의 대역폭과 위상여유가 충분하다는 것을 보여주고 있으며, 제시한 위치 추정기 기반의 추력제어 알고리즘이 궤도열차의 추력을 제어하는데 효과적임을 확인시켜주었다. 따라서 위치 관측기의 가용성도 확인 할 수 있었다.

근사적 동적계획을 활용한 요격통제 및 동시교전 효과분석 (Approximate Dynamic Programming Based Interceptor Fire Control and Effectiveness Analysis for M-To-M Engagement)

  • 이창석;김주현;최봉완;김경택
    • 한국항공우주학회지
    • /
    • 제50권4호
    • /
    • pp.287-295
    • /
    • 2022
  • 저고도 궤적의 장사정포 위협이 대두됨에 따라 이를 방어할 요격 시스템의 개발이 시작될 예정이다. 이러한 장사정포의 공격을 방어하는 문제는 전형적인 동적 무기 표적 할당 문제다. 동적 무기 표적 할당 문제에서는 한 시점에서의 의사결정 결과가 이후 시점의 의사결정 과정에 영향을 주며, 이는 마코브 의사결정 모형의 특징이기도 하다. 장사정포의 공격을 방어하기 위한 의사결정 과정에 허용되는 시간은 공격자와 방어자의 거리를 고려할 때 저고도 궤적의 동시 다발성 발사체에 대한 대응은 수 초 이내에 결정되어야 하나, 짧은 시간 내에 마코브 의사결정 과정으로 최적해를 구하는 것은 불가능하다. 본 논문에서는 장사정포 공격을 방어하는 동적 무기 표적 할당 문제를 마코브 의사결정 문제로 나타내고, 3가지 시나리오를 작성한 후 근사적 동적계획 방법을 적용하여 요격이 가능 시간 안에 해의 도출이 가능한지를 시뮬레이션을 통하여 확인하였다. 도출된 해의 품질을 검증하기 위하여 각 시나리오에 대하여 근사적 동적계획을 적용한 결과와 Shoot-Shoot-Look 방법을 적용한 결과를 비교하였다. 시뮬레이션 결과, 장사정포의 방어 시나리오에 대하여 근사적 동적계획의 결과가 Shoot-Shoot-Look 방법을 이용한 결과보다 우수함을 보였다.

Prospective validation of a novel dosing scheme for intravenous busulfan in adult patients undergoing hematopoietic stem cell transplantation

  • Cho, Sang-Heon;Lee, Jung-Hee;Lim, Hyeong-Seok;Lee, Kyoo-Hyung;Kim, Dae-Young;Choe, Sangmin;Bae, Kyun-Seop;Lee, Je-Hwan
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제20권3호
    • /
    • pp.245-251
    • /
    • 2016
  • The objective of this study was to externally validate a new dosing scheme for busulfan. Thirty-seven adult patients who received busulfan as conditioning therapy for hematopoietic stem cell transplantation (HCT) participated in this prospective study. Patients were randomized to receive intravenous busulfan, either as the conventional dosage (3.2 mg/kg daily) or according to the new dosing scheme based on their actual body weight (ABW) ($23{\times}ABW^{0.5}mg\;daily$) targeting an area under the concentration-time curve (AUC) of $5924{\mu}M{\cdot}min$. Pharmacokinetic profiles were collected using a limited sampling strategy by randomly selecting 2 time points at 3.5, 5, 6, 7 or 22 hours after starting busulfan administration. Using an established population pharmacokinetic model with NONMEM software, busulfan concentrations at the available blood sampling times were predicted from dosage history and demographic data. The predicted and measured concentrations were compared by a visual predictive check (VPC). Maximum a posteriori Bayesian estimators were estimated to calculate the predicted AUC ($AUC_{PRED}$). The accuracy and precision of the $AUC_{PRED}$ values were assessed by calculating the mean prediction error (MPE) and root mean squared prediction error (RMSE), and compared with the target AUC of $5924{\mu}M{\cdot}min$. VPC showed that most data fell within the 95% prediction interval. MPE and RMSE of $AUC_{PRED}$ were -5.8% and 20.6%, respectively, in the conventional dosing group and -2.1% and 14.0%, respectively, in the new dosing scheme group. These findings demonstrated the validity of a new dosing scheme for daily intravenous busulfan used as conditioning therapy for HCT.

피부사상균 감염개에서 Ketoconazole 경구투여시의 간독성에 관한 연구 (Hepatotoxicity in treatment of canine dermatophytosis with ketoconazole)

  • 배성수;김철호;김태융;강정부
    • 대한수의학회지
    • /
    • 제45권2호
    • /
    • pp.255-261
    • /
    • 2005
  • The purpose of this study is to compare hepatotoxicity of each treatment for dermatophytosis; one is the administration of the ketoconazole only and the other, ketoconazole with diphenyl-dimeththyl-dicarboxylate. Have chosen the range of 14-24 months of healthy dogs divided by two groups (group 1 and group 2) for the experiment of which test proved positive in dermatophytosis diagnosis and showed normal reaction in terms of physical examination, blood chemistry and especially of liver function. Group 1 was administrated ketoconazole orally at 10 mg/kg/day and of same dose of ketoconazole with diphenyl-dimethyl-dicarboxylate for group 2. After administering, we have tested two groups by blood collecting every one week in order to check the differences of hepatotoxicity state through AST, ALT and r-GTP, the barometers of liver function which lasted for 12 weeks. Moreover, tested Indocyanine Green (ICG), known as susceptible gauge of function of excretion before starting the experiment and tested ICG as well after 12 weeks. The experiment of result the value of group 1 in AST, ALT and r-GTP has been highly rised after administering ketoconazole for 10 weeks meanwhile, of group 2 has shown a steady state troughout the whole experiment. For ICG test, we injected 0.5 mg/kg of ICG into a vein for both groups and tested the retention rate at regular interval of 15, 30, 45 minutes. The results of retention rate in two groups were similar to before the drug administration. However, after 12 weeks the retention rate of group 1 has been delayed, on the other hand, retention rate of group 2 were a steady state. In conclusion, the administration of ketoconazole only for a long period of time induced hepatotoxicity where as, the administration of ketoconazole with diphenyl-dimethyl-dicarboxylate didn't induce hepatotoxicity. Therefore, when doctors prescribes for a dog with dermatophytosis should not administrate ketoconnazole itself but with diphenyl-dimethyl-dicarboxylate and one who has abnormal condition of liver function should not be prescribed ketoconazole treatment. If there is a case needed to prescribe ketoconazole treatment, the regular monitoring should be accompanied by at the same time.

Development of a new system for measurement of total effluent load of water quality

  • Keiji, Takase;Akira, Ogura
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2015년도 학술발표회
    • /
    • pp.221-221
    • /
    • 2015
  • Sustainable use of water resource and conservation of water quality are essential problems in the world. Especially, problems of water quality are serious one for human health as well as ecological system of all creatures on the earth. Recently, the importance of total effluent load as well as the concentrations of pollutant materials has been recognized not only for the conservation of water quality but also for sustainable water use in watersheds. However, the measurement or estimation of total effluent load from non-point source area such as farm lands or forests may be more difficult because both of concentration and discharge of the water are greatly changed depending on various factors especially metrological conditions such as rainfall, while the measurement from a point source area may be easy because the concentration of pollutant materials and amount of discharge water are relatively steady. Therefore, the total effluent load from a non-point source is often estimated by statistical relationships between concentration and discharge, which is called as L-Q equation. However, a lot of work and time are required to collect and analyze water samples and to get the accurate relationship or regressive equation. So, we proposed a new system for direct measurement of total effluent load of water quality from non-point source areas to solve the problem. In this system, the overflow depth at a hydraulic weir is measured with a pressure gage every hourly interval to calculate the amount of hourly discharge at first. Then, the operating time of a small electric pump to collect an amount of water which is proportional to the discharge is calculated to intake the water into a storage tank. The stored water is taken out a few days later in a case of storm event or several weeks later in a case of non-rainfall event and the concentrations of water quality such as total nitrogen and phosphorous are analyzed in a laboratory. Finally, total load of the water quality can be calculated by multiplying the concentration by the total volume of discharge. The system was installed in a small experimental forestry watershed to check the performance and know the total load of water quality from the forest. It was found that the system to collect a proportional amount of water to actual discharge operated perfectly and a total load of water quality was analyzed accurately. As the result, it was expected that the system will be very available to know the total load from a non-point source area.

  • PDF

소아 혈액종양 환자에서 중추신경계 예방적 치료 후 발생한 백질뇌병증 (Leukoencephalopathy after CNS Prophylactic Therapy in Pediatric Hematologic Malignancy)

  • 이준화;이선민;최은진;이건수
    • Clinical and Experimental Pediatrics
    • /
    • 제46권6호
    • /
    • pp.566-571
    • /
    • 2003
  • 목 적 : 백질뇌병증은 중추신경계 예방 요법을 시행하는 혈액종양 환자들에게는 심각한 합병증의 하나로, 이러한 백질뇌병증을 최소화하기 위해서는 조기 진단과 그에 따른 치료 방법의 변경이 중요하다 하겠다. 이 연구는 소아 혈액종양 환자에서 예방적 중추신경계 치료에 따른 백질뇌병증의 임상 양상 및 치료 방법 변경 후의 예후에 관해 조사하고, 백질뇌병증의 발생을 최소화하기 위한 정기적 두부 자기공명영상 촬영의 의의를 살펴보고자 시행되었다. 방 법 : 1995년 10월부터 2002년 5월까지 경북대학교병원 소아과에서 급성 림프구성 백혈병 및 B세포 림프종으로 진단받고 중추신경계 예방 치료 후 백질뇌병증이 발견된 16명의 환자를 대상으로 병력지와 MRI를 후향적으로 조사하였다. 결 과 : 급성 림프구성 백혈병 환자 15명과 B세포 림프종 환자 1명의 백질뇌병증 진단 시 연령은 중앙값 5년 3개월이었고, 남녀비는 3 : 1이었다. 항암치료 시작 후 백질뇌병증 진단까지 걸린 시간은 2개월에서 17개월이었다. 백질뇌병증 발생 전 투여한 척수강 내 MTX 투여 횟수는 2회에서 15회로 16명에서 모두 시행하였고, 두부 방사선 치료는 10명에서만 시행하였고 용량은 1,800 rads였다. 백질뇌병증 진단 전 경련, 성격 변화, 두통, 정신 이상, 구음 장애, 의식 변화 등의 정신신경학적 증상이 있었던 경우가 10명 있었으며 증상이 없었던 경우가 6명이었다. 백질뇌병증이 진단되었던 16명의 환자 중 4명은 사망하였으며 나머지 12명의 환아 중에서 현재 계속 항암치료 중인 경우가 8명, 항암치료를 종료한 환자가 3명, 그리고 보호자가 원하여 항암치료를 중지한 경우가 1명이었다. 백질뇌병증 진단 후 자기공명영상의 추적관찰을 시행한 경우가 12명, 시기상 아직 시행하지 못한 경우가 4명이었으며 추적관찰을 시행한 경우 중 자기공명영상에서 병변이 호전된 경우가 4명, 지속되는 경우가 6명, 악화된 경우가 2명이었다. 병변이 호전된 4명 중 2명은 병변이 거의 사라져 정상에 가까운 소견을 보였다. 결 론 : 중추신경계 예방 요법으로 사용하는 척수강 내 MTX 주입 요법과 두부 방사선 조사를 비롯하여 정맥으로 투여되는 MTX 또한 백질뇌병증을 유발하며, 이러한 백질뇌병증은 증상없이 발현되는 경우도 많아 병변의 조기발견을 위한 정기적인 자기공명영상의 촬영이 필요하며, 백질뇌병증의 발견 즉시 즉각적인 조치를 취하여 신경학적 기능의 회복을 가능하게 해야 할 것이라고 생각된다.

Validation of Prediction Equations to Estimate the Energy Values of Feedstuffs for Broilers: Performance and Carcass Yield

  • Alvarenga, R.R.;Rodrigues, P.B.;Zangeronimo, M.G.;Makiyama, L.;Oliveira, E.C.;Freitas, R.T.F.;Lima, R.R.;Bernardino, V.M.P.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제26권10호
    • /
    • pp.1474-1483
    • /
    • 2013
  • The objective was to evaluate the use of prediction equations based on the chemical composition of feedstuffs to estimate the values of apparent metabolisable energy corrected for nitrogen balance (AMEn) of corn and soybean meal for broilers. For performance and carcass characteristics, 1,200 one-d-old birds (male and female) were allotted to a completely randomised factorial $2{\times}8$ (two genders and eight experimental diets) with three replicates of each sex with 25 birds. In the metabolism trial, 240 eight-d-old birds were distributed in the same design, but with a split plot in time (age of evaluation) with five, four and three birds per plot, respectively, in stages 8 to 21, 22 to 35, and 36 to 42 d of age. The treatments consisted of the use of six equations systems to predict the AMEn content of feedstuffs, tables of food composition and AMEn values obtained by in vivo assay, totalling eight treatments. Means were compared by Scott-Knott test at 5% probability and a confidence interval of 95% was used to check the fit of the energy values of the diets to the requirements of the birds. As a result of this study, the use of prediction equations resulted in better adjustment to the broiler requirements, resulting in better performance and carcass characteristics compared to the use of tables, however, the use of energy values of feedstuffs obtained by in vivo assay is still the most effective. The best equations were: AMEn = 4,021.8-227.55 Ash (for corn) combined with AMEn = -822.33+69.54 CP-45.26 ADF+90.81 EE (for soybean meal); AMEn = 36.21 CP+85.44 EE+37.26 NFE (nitrogen-free extract) (for corn) combined with AMEn = 37.5 CP+46.39 EE+14.9 NFE (for soybean); and AMEn = 4,164.187+51.006 EE-197.663 Ash-35.689 CF-20.593 NDF (for corn and soybean meal).

열 이온화 질량분석기를 이용한 Ru 동위원소 측정 및 동중원소 영향 보정 (The isobaric effect correction and measurement of the Ru isotopes by thermal ionization mass spectrometry)

  • 전영신;김정석;한선호;송규석
    • 분석과학
    • /
    • 제23권5호
    • /
    • pp.498-504
    • /
    • 2010
  • 열 이온화 질량분석을 이용한 루테늄(Ru) 동위원소 비 측정은 루테늄의 이온화 포텐셜이 높고 산화상태로 휘발이 일어나 시료가 쉽게 소모되어 안정된 이온피크를 얻기가 어렵다. 따라서 이온화 효율을 높이고 안정적 이온생성을 위한 실험과 질량분석에 사용되는 레늄(Re) 필라멘트에 함유된 불순물들에 의한 동중원소 영향을 검토하였다. 질량분석에서 double filament를 사용하는 것 보다는 single filament를 사용하는 것이 더 안정적 이온 피크를 얻을 수 있었을 뿐만 아니라 몰리브데넘(Mo)에 의한 동중원소 영향도 작았다. 또한 필라멘트 온도를 필요이상 높이면 높일수록 동중원소 영향이 큼을 알 수 있었다. 즉, 불순물로 함유된 Mo이 Ru 동위원소 비 측정에 큰 영향을 주었다. 특히 필라멘트 온도를 일정한 시간 간격을 두고 서서히 올려주는 것이 안정된 피크를 얻는데 매우 중요함을 알 수 있었다. Mo으로부터 오는 동중원소 영향을 $^{94}Mo/^{99}Ru$ 비를 측정하여 보정함으로써 Ru 동위원소 비를 정확히 측정할 수 있었다.