• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.6
• /
• pp.35-41
• /
• 2007

We proposed an eye gaze tracking system under natural head movements. The system consists of one CCD(charge-coupled device) camera and two front-surface mirrors. The mirrors rotate to follow head movements in order to keep the eye within the view of the camera. However, the mirror controller cannot guarantee the fast head movements, because the frame rate is generally 30Hz. To overcome this problem, we applied Kalman filter to estimate next eye position from the current eye image. In the results, our system allowed the subjects head to move 60cm horizontally and 40cm vertically, with the head movement speed about 55cm/sec and 45cm/sec, respectively. And spatial gate resolutions were about 4.5 degree and 5.0 degree, respectively, and the gaze estimation accuracy was 92% under natural head movements.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.5
• /
• pp.381-388
• /
• 2014

Our aim was to simulate ocean waves in a small-size wave flume and observe the motion of a cylindrical floating body placed in an offshore environment. To precisely visualize the oscillation of the body, a set of light-emitting diode illuminators and high-speed charge-coupled device camera were installed in the flume. Spectral analysis was performed of the movement of the floating body. The wave generator and absorbers worked well to simulate stable regular waves. As the period of the oncoming waves changed, the movement of the floating body substantially differed when tethered to a tension-leg mooring cable. In particular, when connected to the tension-leg mooring cable, the natural frequency of the floating body suddenly appeared at 0.391 Hz as the wave period was increased.

• Journal of Fisheries and Marine Sciences Education
• /
• v.15 no.2
• /
• pp.206-218
• /
• 2003

In spite of the importance of a fishing industry, neither any terminology defined in details nor academic systems to educate the workers in the fishery were established in the fisheries social education. The fisheries social education was considered to be the practical area around the actual fields. Therefore, on-site education was very important. Accordingly, this study collected and analyzed theoretical basis of a social education and data on the rural adult education and examined the actual status of the fishing industry in Korea and fisheries extension services enterprise and fisheries developmental enterprise corresponding to the actual fisheries social education conducted in Korea. On the basis of these frames, this study summarized the direction for the progress of fisheries social education that has not been studied until now for the purpose of suggesting the future directions of the fisheries social education as follows; The recognition on the importance of fisheries social education and fundamental researches in the fisheries social education should be extended. The practical development of fisheries social education should be realized. Fisheries extension services enterprise should be evolved by fishermen. The abilities of instructors in the fisheries social education should be improved. The academic factors in the fisheries social education should be emphasized. Inter-disciplinary and multi-disciplinary approaches should be adopted. Various programs should be developed for the progress of the fisheries social education. The exclusive department in charge of the fisheries social education should be established. The information system for the fisheries social education should be secured. The industry, academic organizations and the organs should make cooperation. The fisheries social education should be provided by general social education institutions for the progress. The fisheries development should be deployed on the basis of environmental preservation. It is necessary to deploy the new fishing village movement like the Saemaul movement to the fisheries. The administrative and financial supports for the fisheries social education should be expanded. It is essential to cultivate the future fishermen for the international competitiveness.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.2
• /
• pp.69-79
• /
• 2004

To correctly simulate performance characteristics of fuel cells with a modeling method, various physical and chemical phenomena must be considered in fuel cells. In this study, performance characteristics of planar solid oxide fuel cells were simulated by a commercial CFD code, CFD-ACE+. Through simultaneous considerations for mass transfer, heat transfer and charge movement according to electrochemical reactions in the 3-dimensional planar SOFC unit stack, we could successfully predict performance characteristics of solid oxide fuel cells under operation for structural and progress variables. In other words, we solved mass fraction distribution of reactants and products for diffusion and movement, and investigated qualitative and quantitative analysis for performance characteristics in the SOFC unit stack through internal temperature distribution and polarization curve for electrical characteristics. Through this study, we could effectively predict performance characteristics with variables in the unit stack of planar SOFCs and present systematic approach for SOFCs under operation by computer simulation.

• Journal of Korean Physical Therapy Science
• /
• v.9 no.4
• /
• pp.119-130
• /
• 2002

Objective: The purpose of this research was to use data for furnish quality physical therapy service. The research subjects were admitted shoulder pain patients treated with physical therapy that was to grasp physical therapy method as distinguishing application time. Subject: Total number of distributed questionnaire was 563 persons that was to utilized physical therapy room of 56th medical institution and distributed it to each physical therapist in charge. Method: The research used questionnaire in order to research itemized treatment application time that is according to physical therapy method to applicated with shoulder pain patient. The research contents is to received shoulder pain diagnosis period, total duration of utilizing physical therapy room, the number of times per week to used physical therapy room, etc. And we had physical therapist recording the time of application physical therapy method come under the items. Result: The average treatment time was 59.2 minutes at all patients. During this time, 39.7 min was modality treatment. Active movement treatment was only 7.1 min. Total treatment time was longest in general hospital at 64.9 min, it was shortest in clinical hospital at 53.3 min. Treatment time was difference as hospital scale(p<0.001). Active movement treatment time was longest in general hospital at 11.5 min. The average treatment time was 4.5 min in clinical hospital. Therefore, it was related to hospital scale(p<0.05). The average of manual therapy time by physical therapist was 7.5 min. General hospital was linger at 8.6 min than clinical hospital at 6.7 min(p<0.05). Patient of 90.2 % were treated to hot pack, ultra-sound treatment was next as 50.1%. Active strengthening exercise was most carrying out of the active treatment as 25.4 %. Active sensorimotor exercise was practiced only 28 persons of 5.0 %. Most joint mobilization (38.4 %) was used of the passive manual therapy items, next to soft tissue mobilization (33.0 %), and next to manual distraction therapy(14.0 %).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2239-2244
• /
• 2013

Industrial machines have constraints on movement due to its wire for power supply. Recently, the research on wireless power supply for industrial machine which is required to move freely is receiving a lot of attention. In this paper, we suggest a magnetic induction system which can charge a equipment's battery with wireless at a close range. The system was designed to operate at 13.56 MHz and a distance of 20~30 mm between the transmitting and the receiving power module. From experiment, it was found that it takes about 135 minutes for charging the battery with about 15 V using the proposed system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.3
• /
• pp.177-184
• /
• 2018

In case that limited resources can be mobilized, non-structural countermeasures such as 'monitoring using Information and Communication Technology might be one of solutions to mitigate disaster risks. Having established the monitoring system, operational and maintenance costs to maximize the effectiveness might trouble the authority concerned or duty attendant who is in charge. In this respect, "Guerrilla Sensor" would be very cost effective because of the inherent mobility characteristic. The sensor device with the IRIS camera and GPS (Global Positioning System) equipped, is basically battery-operated and communicates with WCDMA (Wideband Code Division Multiple Access). It has a strong advantage of capabilities for 'Disaster Response' with immediate and prompt action on the spot, making the best use of IoT (Internet of Things), especially with the mobile web. This paper will explain how the sensor system works in real-time GIS (Geographic Information System) pinpointing the exact location of the abnormal movement/ground displacement and notifying the registered users via SMS (Short Message Service). Real time monitoring with early warning and evaluation of current situations with LBS (Location Based Service), live image and data information can help to reduce the disaster impact. Installation of Guerrilla sensor for a real site application at Gimcheon, South Korea is also reported.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.50
• /
• pp.309-331
• /
• 2011

Today, the world is considered to indispensable basic data in specific gravity of international trade is increasing in economic activity of every country with globalization, and trade connection index number analyzes an economy or part of trade that contribute to economic growth of a country along with other foreign trade statistics and evaluates along with this. Also, it is becoming one of big subject for economic policy person in charge and related economists I do how measure movement of amount, price and amount of materials in trade. But, about till now interest lack about trade index and trade index creation theoretical, it is actuality that export, import connection index number or similar research is not attained much into domestic and overseas from study tribe which is gone ahead. Moreover, study that try to judge and forecast stream of market applying trade connection index number is hard to find on study until now. And, in this research, there is the objective to figure out stream of Korean market change through trade business index creation that base on Korea Customs Administration export and the importation data and this is differences with several study, and at the same time, it is value of this study.

• Advances in materials Research
• /
• v.4 no.3
• /
• pp.165-178
• /
• 2015

Friction coefficient of epoxy metal matrix composites were investigated. The main objective was to increase the friction coefficient through rubber sole sliding against the epoxy floor coating providing appropriate level of resistance. This was to avoid the excessive movement and slip accidents. Epoxy metal matrix composites were reinforced by different copper wire diameters. The epoxy metal matrix composites were experimentally conducted at different conditions namely dry, water and detergent wetted sliding, were the friction coefficient increased as the number of wires increased. When the wires were closer to the sliding surface, the friction coefficient was found to increase. The friction coefficient was found to increase with the increase of the copper wire diameter in epoxy metal matrix composites. This behavior was attributed to the fact that as the diameter and the number of wires increased, the intensity of the electric field, generated from electric static charge increased causing an adhesion increase between the two sliding surfaces. At water wetted sliding conditions, the effect of changing number of wires on friction coefficient was less than the effect of wire diameter. The presence of water and detergent on the sliding surfaces decreased friction coefficient compared to the dry sliding. When the surfaces were detergent wetted, the friction coefficient values were found to be lower than that observed when sliding in water or dry condition.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.6
• /
• pp.763-772
• /
• 1998

The effects of an inserted coil on flow patterns and heat transport performance for a horizontal rotating heat pipe have been studied experimentally. Especially, the present study is to see an internally inserted helical coil inside a RHP would lead to the same kind of results as internal fins. Visualization test conducted for an acryl tube, charged water with at a volumetric rate of 20%. When the flow kept pool regime at a low RPM(less than 1,000 RPM), the movement of coil forced the water to flow in axial direction. But this pumping effect of coil disappeared, when the pool regime changed to annular one which could be created by increasing RPM. The pumping effects for RHP with an inserted coil resulted enhancement both in condensation heat transfer coefficient and heat transport limitation, as obtained in case of using internal fins. But all these effects became negligible in the range of higher RPM(above 1,000∼1,200) with the transition of flow regime to annular flow.