• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.8
• /
• pp.60-66
• /
• 2019

This study aims to develop and manufacture a device for inspecting impurities in a sealed aluminum container using an X-ray technique. Two X-ray oscillators and detectors are used to detect the entire sample. The stage for sample movement was fabricated using two high-voltage generators and X-ray detectors arranged diagonally. In addition, the high-voltage generator is composed of a vacuum tube, a high-voltage generator, and circulating oil for cooling. It includes a control unit for controlling other equipment, a power supply unit, and a video output unit; the most important part of the X-ray is the X-ray generation part. In this study, a flat panel was used along with the aim of developing the detector part. In particular, the development of the scintillator introduced in this study is a primary focus. The developed scintillator can be combined with a lens and can then be assembled with a charge coupled device (CCD) sensor.

• Korean Journal of Acupuncture
• /
• v.17 no.1
• /
• pp.123-140
• /
• 2000

The purpose of this study is to understand the special character and the tendency of the movement change that 12 meridians possess. We studied about the incidental and fundamental rule of the six atmospheric influence that was presented by Pyobonjoong(the incidental, fundamental, intermediate) theory, and the Hwang won-uh's the Six Channel activity of the Qi theory that presented movement form of the meridian through the six atmospheric influence. Then we found the following substances. The Pyobonjoong(the incidental, fundamental, intermediate) theory is applicable to understand the special character and the tendency of the movement change that Meridians possess. But, because the Pyobonjoong(the incidental, fundamental, intermediate) theory can't classify the characteristic difference of the hand and foot meridians, then the principle that can devide the meridians of the hand and foot, must be supplied. The Jungwha(right changing)-Daewha(opposite changing) theory is able to concretely classify the special character of the hand and foot six meridians. And Hwang's Shawha(superintending change)-Jongwha(following change) theory that is base on Jungwha(right changing)-Daewha(opposite changing) theory, is able to classify the special character of the hand and foot six meridians, too. If the concept of the Meridians is understood by the Shawha(superintending change)-Jongwha(following change) theory, the special character of the hand and foot six meridians could be concretely classified and then the meridian of the Bowels and the six atmospheric influence corresponded to the meridians could be expansively explained as the point that take charge and control these special Qi in the human body The Bon-Qi(fundamental Qi) act on the special character of Shawha(superintending change) six meridians and the tendency of the movement change is cause by the insufficiency and excessiveness of the Bon-Qi(fundamental Qi). The Qi of the Shawha(superintending change) meridians act on the special character of Jongwha(following change) six meridians and the tendency of the movement change is cause by the exuberance of Yang and the deficiency of Yang.

• Journal of the Korean Society for information Management
• /
• v.22 no.3 s.57
• /
• pp.307-326
• /
• 2005

Open access movement supports the principle that the published output of scientific research should be available to everyone without charge. The term open access is used in the broad context of the wider movement. To achieve the objectives of open access to scholarly journal literature, BOAI(Budapest Open Access Initiative) recommends using two complementary strategies: 'self-archiving' in institutional/disciplinary repositories and 'open access journals.' This study introduces the strategies of open access movements and analyzes the ways to help the cause of open access by academic stakeholders(i.e., researchers, librarians, universities, publishers, foundations, learned societies, and government) from the perspective of two BOAI strategies.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.4
• /
• pp.375-385
• /
• 2016

Given the rapid progress made in understanding the dynamics of an offshore floating body in an ocean environment, the present study aimed to simulate ocean waves in a small-sized wave flume and to observe the motion of a cylindrical floating body placed in an offshore environment. To generate regular ocean waves in a wave flume, we combined a wave generator and a wave absorber. In addition, to precisely visualise the oscillation of the body, a set of light-emitting diode illuminators and a high-speed charge-coupled device camera were installed in the flume. This study also focuses on the spectral analysis of the movement of the floating body. The wave generator and absorbers worked well to simulate stable regular waves. In addition, the simulated waves agreed well with the plane waves predicted by shallow-water theory. As the period of the oncoming waves changed, the movement of the floating body was substantially different when tethered to a tension-leg mooring cable. In particular, when connected to the tension-leg mooring cable, the natural frequency of the floating body appeared suddenly at 0.391 Hz as the wave period increased.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1999.10a
• /
• pp.253-261
• /
• 1999

It is essential for port planning, coastal zone management and environmental impact study to analyze the variation of current and water quality due to the development of water area and discharged water from the estuary barrage and basin, etc. Mokpo sea area has downstream from a long river and two large basins, the Yongsan river and Yongam-Kumho basins, discharging much of water through water gates for the purpose of flood and prohibition of salt intrusion to the inland fresh water area. In this study, the numerical calculation were carried out for the analysis of diffusion characteristics due to discharging operation, adopting the results of tidal current simulation. ADI method is applied to the governing equation for the movement of sea water and diffusion and 6-point method to the advection terms of diffusion equation. As the results of this study, it is known that the discharging operation causes increasing and/or decreasing of current velocity and enlarging and/or depressing of pollutant diffusion limits depending on the distance from the discharging gates and the modes of discharging operation. To utilize these result, the linked gate operation and the method increasing exchange of sea water must be considered.

• Journal of KIISE:Software and Applications
• /
• v.34 no.3
• /
• pp.255-265
• /
• 2007

In this paper, we propose a new illumination-robust drowsy driver monitoring system with single CCD(Charge Coupled Device) camera for intelligent vehicle in the day and night. For this system that is monitoring driver's eyes during a driving, the eye detection and the measure of eyelid movement are the important preprocesses. Therefore, we propose efficient illumination compensation algorithm to improve the performance of eye detection and also eyelid movement measuring method for efficient drowsy detection in various illumination. For real-time application, Cascaded SVM (Cascaded Support Vector Machine) is applied as an efficient eye verification method in this system. Furthermore, in order to estimate the performance of the proposed algorithm, we collect video data about drivers under various illuminations in the day and night. Finally, we acquired average eye detection rate of over 98% about these own data, and PERCLOS(The percentage of eye-closed time during a period) are represented as drowsy detection results of the proposed system for the collected video data.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.244-250
• /
• 2013

We investigated green phosphorescent organic light-emitting diodes (PHOLEDs) with charge control layer (CCL) to produce high efficiency. The CCL and host material which was 4,4,N,N'-dicarbazolebiphenyl (CBP) of bipolar property can control the carrier movement in emitting layer (EML). The performance improvement by the insertion of CCL was realized to the well confined exciton and the reduced triplet exciton quenching effect in EML. Five types of devices (Device A, B, C, D, and E) were fabricated following the thickness of CCL within EML. The properties of device D using optimized thickness of CCL showed external quantum efficiency of 16.22% and luminous efficiency of 55.76 cd/A, respectively.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.127-130
• /
• 2004

For the quality control of the industrial products, an automatic hole measuring system has been developed. The measurement device allows X-Y movement due to contact forces between a hole and its own circular cone and the device is attached to an industrial robot. Its measurement accuracy is about 0.04mm. This movement of the plate is measured by two LVDT sensor system. But this system using the LVDT sensors is restricted by high cost and precision of measurement and correspondence of environment so particularly, a vision system with CCD-Camera is discussed in this paper for the above mentioned purpose. The device consists of two of two links jointed with hinge pins basically and, they guarantee free movement of the touch prove attached on the second link in the same plane. These links are returned to home position by the spring plungers automatically after each process for the next one. On the surface of the touch prove, it has a circular white mark for camera recognition. The system detect and notify the center coordinate of capture mark image through the image processing. Its measuring accuracy has been proved to be about $\pm$0.01mm through the repeated implementation over 200 times. This technique will shows the advantage of touch-indirect image capture idea using cone-shaped touch prove in various symmetrical shaped holes particulary, like tapped holes, chamfered holes, etc As a result, we attained our object in a view of the accuracy, economical efficiency, and functionality

• Journal of the Korean Ceramic Society
• /
• v.53 no.3
• /
• pp.312-316
• /
• 2016

The energetics of defects in the presence of domain walls in $LiNbO_3$ are characterized using density-functional theory calculations. Domain walls show stronger interactions with antisite defects than with interstitial defects or vacancies. As a result, antisite defects act as a strong pinning center for the domain wall in $LiNbO_3$. Analysis of migration behavior of the antisite defects across the domain wall shows that the migration barrier of the antisite defects is significantly high, such that the migration of antisite defects across the domain wall is energetically not preferable. However, further study on excess electrons shows that the migration barrier of antisite defects can be lowered by changing the charge states of the antisite defects. So, excess electrons can enhance the migration of antisite defects and thus facilitate domain wall movement by weakening the pinning effect.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2529-2532
• /
• 2003

The quality of agricultural products is represented a degree of freshness and a special qualify that has a close relation to commercial value. To grade tomatoes, it used to nondestructive equipment of a charge-coupled device(CCD) camera and near-infrared(NIR) spectrum analysis method. The NIR spectrum analysis method is used to determine internal qualities such as a brix and an acidity. The CCD camera is used to measure external qualities like color and a size of tomatoes. This paper explaines the structure and movement of the automatic grade system and applies the algorithm for deformed tomtatoes and characteristics of tomatoes through image processing to the grade system.