• 한국축산시설환경학회지
• /
• 제5권3호
• /
• pp.157-170
• /
• 1999

This study was conducted to investigate the effects of Scoria, Quartz porphyry and Oak charcoal powder feeding by 1% level of concentrate on the fattening cross bred bulls(5/8 Korean Native Cattle, 2/8 Charolais, 1/8 Brahman germ plasma) Feeding trial was conducted with 4 treatment groups which were T1(Full feeding of concentrate and roughage for 12 months), T2(T1 and Scoria addition), T3(T1 and Quartz porphyry addition) and T4(Oak charcoal addition) for 360 days, consisting of 32 heads whose initially weights were about 299.7kg. The results obtained are summarized as follows; 1. During the over-all period, average daily gains by T3, T4, T2 and T1 were 1.024, 0.987, 0.977kg and 0.964, respectively, without a significant difference by treatments. 2. Concentrate intakes per body weight and TDN intakes required per unit of kilogram gain were lower in addition agent groups than in control, and in all the treatments feed efficiency was higher at early stage for 360 fattening day than at end stage. 3. Carcass weight, dressing percent, back-fat thickness and loin eye muscle area by treatments were 330.9 to 348.4kg(average 340.3kg), 55.2~56.2(average 55.8%), 0.41~0.55(average 0.46cm)and 76.0~80.9$\textrm{cm}^2$(average 77.6$\textrm{cm}^2$), respectively, and were improved in addition agent groups than in control. 4. Meat quality grade is higher in addition agent groups than in control, and heads of 1st grade by treatments was 3, 2, 1 and none in T4, T2, T3 and T1, respectively. 5. Incidence heads of diseases by treatment were not apparently different, but diseases of digestive system was decreased in addition agent groups than in control. 6. The nitrate nitrogen content of fattening bull dung which collected in rectum were 0.082~0.089% (average 0.084%), and the content in addition agent groups was smaller than in controll. 7. Income was higher in order of T4, T3, T2, and T1 and incomes of treatment groups were grater than that of control group by 21.4 to 33.5 percent. According to the above results it may be concluded that fattening bulls may be required to feed no more than 1% of Scoria, Quartz porphyry and Oak charcoal powder based on the concentrate feeding level during the fattening period(12 to 24 month of age) to produce high quality meat and increase income.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.83-83
• /
• 2007

• Journal of the Korean Wood Science and Technology
• /
• 제35권3호
• /
• pp.53-60
• /
• 2007

북양젓나무(Abies sibirica Ledeb)를 이용하여 온도별로 탄화한 목분탄, 목섬유탄 및 수피탄 등 목질탄화물에 대한 탄소함량, 세공특성 및 화학적 특성을 조사하였다. 목질탄화물의 종류와 관계없이 탄화온도가 상승할수록 탄화수율은 감소하였으며, 목탄의 탄소함량은 탄화온도의 상승과 함께 증가하였으나, 수소나 산소의 함량은 감소하였다. 특히 수피탄화물은 목분 또는 목섬유 탄화물과 비교하여 탄화수율이 높게 나타났으며, 수피탄화물내 회분함량도 상당히 높았다. 목분탄과 목섬유탄의 비표면적이 수피탄보다 큰 경향이 있으며, $600^{\circ}C$까지는 탄화온도의 증가와 함께 비표면적, 전세공용적이 증가하여 최대를 나타내었으나, $800^{\circ}C$로 탄화온도가 상승하면 오히려 비표면적과 총세공용적이 감소되었다. 그러나 평균세공크기는 목탄종류와 관계없이 탄화온도의 상승과 함께 감소하였다. 한편 목탄의 표면 관능기양은 탄화온도가 높을수록 산성인 HCl 흡착량이 많고, 탄화온도가 낮을수록 염기성인 NaOH, $Na_2CO_3$ 및 $NaHCO_3$ 흡착량이 많으며, 이러한 결과는 목탄의 pH에 영향을 주어 고온탄화물은 알칼리성, 저온탄화물은 산성을 나타내는 것으로 생각된다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권4호
• /
• pp.29-37
• /
• 2007

탄화온도 차이에 따른 목질 탄화물의 중금속 흡착성 변화를 알아보기 위하여, 신갈나무(Quercus mongolica) 목부와 낙엽송(Larix kaempferi) 수피분말을 $400{\sim}900^{\circ}C$에서 탄화하였다. 목질 탄화물의 pH는 재료의 종류와 관계없이 탄화온도의 증가와 함께 증가하여 $900^{\circ}C$의 목탄 및 수피탄은 각각 10.8, 10.4를 나다내었다. 또한 탄화 온도 증가와 함께 탄소함량비가 증가하고 동일 탄화온도에서 목탄에 비해 수피탄의 탄소함량비가 큰 경향을 보였다. 액상흡착력을 나타내는 요오드흡착력은 목탄이 수피탄보다 다소 큰 경향을 나타내었다. 이러한 특성을 지닌 목탄과 수피탄에 의한 15ppm의 Cd, Zn 및 Cu 중금속용액에 대한 흡착제거율을 조사한 바, 높은 탄화온도에서 제조된 목탄과 수피탄일수록 높은 중금속제거율을 나타내었으며, 탄화물 종류에 있어서는 목탄이 수피탄 보다 높은 중금속 제거율을 나타내는 경향이 있었다. 특히 목탄의 경우, $500^{\circ}C$ 이상에서 제조된 탄화물 0.2 g의 사용으로 거의 100%에 가까운 제거율을 나타내었다. 한편 흡착질 종류에 있어서의 제거성능에는 다소 차이가 있으며, 본 연구에서 사용한 탄화물의 흡착성은 Cu>Cd>Zn 순으로 높았다. 이는 목탄과 같은 흡착제와 흡착의 대상이 되는 흡착질과의 물리 화학적 상호관계가 흡착에 영향을 주기 때문으로 목탄의 흡착효율을 높이기 위해서는 이에 대한 연구가 더 필요할 것으로 생각된다.

• 복식문화연구
• /
• 제12권6호
• /
• pp.1010-1020
• /
• 2004

The purposes of this study were to investigate characteristic changes on nonwoven fabric by the charcoal and the yellow soil printing. It separate the grind charcoal and the yellow soil as two different size of particles $45{\sim}52{\mu}m\;and\;53{\sim}65{\mu}m$ for hand screen printing on three kind of nonwoven fabrics. To examine the effect of the charcoal and the yellow soil printing on nonwoven fabric were to observe surface changes by a scanning electron microscope, dyeability by using spectrophotometer, moisture regain by oven method, deodorization and antibacterial activity. The results were as follows: When the charcoal and the yellow soil powder concentration increased from 3 to $9\%$ or from 5 to $10\%$, K/S value also increased from 3.06 to 8.55 or from 1.14 to 1.80. The charcoal and the yellow soil moisture regain also increased. In same concentration, moisture regain occurred higher as particle of small size. In concentration of charcoal $3\%$, rate of deodorization measured as $89\%,\;83\%\;and\;87\%,\;and\;9\%$ concentration caused $96\%,\;86\%\;and\;93\%$ of high deodorization. In concentration of 5, $10\%$ of yellow soil, rate of deodorization measured as $85\%$ over. Antibacterial activity examination in nonfinished nonwoven fabric resulted range of $60\%$, however, $3\%\;and\;9\%$ concentration finished nonwoven fabric resulted $99.9\%$ of excellent antibacterial activity. Also $5\%,\;10\%$ yellow soil concentration was appeared same resoult.

• 산업기술연구
• /
• 제23권A호
• /
• pp.199-206
• /
• 2003

The charcoal-encapsulated methyl silica microcapsules were prepared by a O/W microemulsion sol-gel method, and the adsorption properties on aquatic humic acid were investigated. The capsules prepared were spherical, $100{\sim}1000{\mu}m$ in size. The size distribution was controllable by adjusting the size of charcoal powder, charcoal/methyl silica ratio, and agitating speed in O/W sol-gel process. Adsorption efficiency of charcoal for aquatic humic acid was decreased after encapsulation by methyl silica shell. The decreased adsorption efficiency can be dependent on the decrease of the BET surface area and pore volume after encapsulation. Diffusion properties of humic acid through the capsule shell also played an important role on adsorption efficiency. Therefore, the reasonable target pollutants for the capsules can be VOC or odor molecules which can overcome diffusion barrier through shell of capsules in air condition. Functionalization methods for the charcoal-encapsulated $CH_3(SiO)_n$ microcapsules by incorporation of $TiO_3$ as a phtocatalytic function and by incorporation of inorganic pigment as a color function were also investigated. $TiO_2$ coating properties were controllable by adjusting pH, temperature, and the concentration of $TiOSO_4$. In XRD measurement, the crystal form of the coated $TiO_2$ was anatase. For the colorization of the capsules, inorganic pigments were more efficient than organic dyes, and various color was introduced to the capsules using inorganic pigments.

• Carbon letters
• /
• 제1권2호
• /
• pp.87-90
• /
• 2000

Porous carbon from charcoal filled polypropylene composites were prepared and their mechanical properties were evaluated. In preparing the composites, crosslinking agent (sodium benzonate) were used in order to improve the bonding force between matrix and fillers. In this study, the effects of charcoal powder and sodium benzonate concentration on the mechanical properties and interface phenomena on the composites were evaluated. The mechanical properties of composites increased progressively with the decrease of filler loading. In the case of addition of the crosslinking agent into the composite, the mechanical properties were increased and showed maximum value at the 3 wt% concentration of sodium benzonate. According to the result of the TGA, the weight loss of composite according to crosslinking agent was not observed and initial thermal degradation temperature of composite reinforced charcoal was located at $390^{\circ}C$.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권1호
• /
• pp.39-49
• /
• 2022

Bottom ash generated from thermal power plants is mainly disposed in landfills, from which metals may be leached by infiltrating water. To evaluate the effect of metals in leachate on soil and groundwater, we characterized bottom ash generated from burning cokes, bituminous coal, the mixture of bituminous coal and wood pellets, and charcoal powder. The bottom ash of charcoal powder had a relatively large particle size, and its wood texture was well-preserved from SEM observation. The bottom ash of charcoal powder and wood pellets had relatively high K concentration from total element analysis. The eluates of the bottom ash samples had appreciable concentrations of Ca, Al, Fe, SO₄, and NO₃, but they were not a significant throughout the batch test. Therefore, it is considered that there is low possibility of soil and groundwater contamination due to leaching of metal ions and anions from these bottom ash in landfills. To estimate the trend of various trace elements, long-term monitoring and additional analysis need to be performed while considering the site conditions, because they readily adsorb on soil and aquifer substances.

• 보존과학회지
• /
• 제32권2호
• /
• pp.109-121
• /
• 2016

나전대모칠기는 나전, 대모, 금속선 등을 사용하여 가식한 것으로 금속분을 기물 전체에 뿌려 전체적으로 밝은 색조로 표현한 특징을 가진다. 본 연구는 칠도막 단면을 광학현미경과 SEM-EDS 분석을 통하여 칠도막 단면에 나타나는 재료와 특성을 밝히고자 하였다. 그 결과, 목탄분과 토분을 섞은 바탕칠 위에 진사와 석황이 섞인 칠을 바르고, 그 위에 황동분을 뿌린 것으로 나타났다. 칠층에 섞여 있는 안료의 양은 소량으로 종래의 문양 표현에 쓰인 색칠과는 구별된다. 특히, 나전대모칠기의 칠층에서 진사와 석황의 두 가지 안료를 혼합하여 사용한 예를 확인할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제35권4호
• /
• pp.21-28
• /
• 2007

탄화온도에 따른 목탄의 pH, 원소함량비와 목탄 표면의 FT-IR 변화를 분석하기 위하여 잣나무 목탄이 사용되었다. 300, $400^{\circ}C$의 탄화온도에서 제조된 잣나무 목탄의 pH는 각각 5.27, 6.80로 측정된 반면, $500{\sim}900^{\circ}C$에서 제조된 시료의 pH는 크게 높아져 9.25~10.35로 나타났다. 탄화 온도의 차이에 따른 목탄의 원소 조성비 변화에 있어서는, 고온 탄화 목탄일수록 C 함유율이 높아지고 상대적으로 O, H의 함유율은 낮아졌다. 가장 큰 원소 조성비 변화 폭은 400와 $500^{\circ}C$의 탄화 온도에서 측정되었다. 300, $400^{\circ}C$에서 제조된 목탄의 C, O, H 원소함량비는 각긱 67.7, 28.9, 3.0%와 72.2, 24.9, 2.5%로 측정된 반면, $500{\sim}900^{\circ}C$ 사이에서 제조된 목탄의 C, O, H 함량비는 각각 83.3~90.5%, 13.6~9.0%, 2.7~0.3% 사이로 나타났다. FT-IR에 의한 목탄 표면 관능기 분석은 탄화 전 목분과 각각 $300{\sim}900^{\circ}C$ 사이의 온도에서 제조된 목탄의 IR-스펙트럼 비교로 이루어졌다. 300와 $400^{\circ}C$에서 탄화된 목탄의 표면에는 Lactone, Lactol, Carboxylic acid, Carboxylic anhydride 등의 산성 관능기들을 많이 포함하는 것으로 유추되는 반면, $500^{\circ}C$ 이상의 온도에서 탄화된 목탄의 경우에는 Pyrone 계토의 관능기를 많이 포함하는 것으로 판단된다.