• 한국해양학회지:바다
• /
• 제16권1호
• /
• pp.14-26
• /
• 2011

금강하구 연안역에서 고주파 레이더를 사용하여 2008년 12월부터 2009년 2월까지 표층류를 관측하였는데, 관측된 표층류 자료는 전파의 간섭과 기상 상황에 따라 일시적으로 관측이 이루어지지 않는 구역들이 있었다. 관측된 구역의 자료를 보충하기 위하여 최적보간 과정을 개발하여 적용하였다. 금강하구 연안역에서 표층류의 공간적 상관성의 특성을 조사하고 최적보간법을 이용하여 공간적 결측 구역을 보충하였으며, 보간된 표층류의 시공간적 분포와 산출유속 오차 패턴을 조사하였다. 연구해역 표층 순환에서 조류가 우세하므로 연안역 관측 지점들 사이의 표층해류간 상관계수가 0.7 이상이었다. 원 자료를 보간하기 위해 관측 자료공분산(C), 지역화한 공간평균 공분산($C^G_{sm}$), 지수함수를 이용한 맞춤 평균공분산($C_{ft}$)을 사용하였다. 최적보간이 결측 구간을 채우고, 관측 자료의 시계열 중에서 뾰족하게 튀어나온 비정상적인 자료 부분을 억제하였으며, 그 결과 보간한 유속 자료의 분산은 원 자료의 분산보다 작았다. 공간적 자료획득률이 70% 이상(이하)일 때, $C^G_{sm}$ ($C_{ft}$)를 이용하면 C를 이용한 경우에 비해 보간 오차가 상대적으로 작았다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1130-1132
• /
• 2004

In this paper, we investigated the operational characteristics of the fault current limiting in the The flux-lock type high-Tc superconducting fault current limiter. The flux-lock type high-Tc superconducting fault current limiter was consisted of primary and secondary copper coils that flux was locked on iron core and YBCO thin film. The operational characteristic of a flux-lock type SFCL dependent on winding direction of coil 1 and coil 2, and the number of turns of coil 1 and coil 2, inductances of the coils, saturation in iron core, the properties of superconducting element etc. In this cases, we investigated the fault currents limiting characteristics of the flux-lock type SFCL when winding direction of coil 1 and coil 2 was subtractive polarity winding.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.256-267
• /
• 2015

Grid-connected transformerless photovoltaic (PV) inverters (TPVIs) are increasingly dominating the market due to their higher efficiency, lower cost, lighter weight, and reduced size when compared to their transformer based counterparts. However, due to the lack of galvanic isolation in the low voltage grid interconnections of these inverters, the PV systems become vulnerable to leakage currents flowing through the grounded star point of the distribution transformer, the earth, and the distributed parasitic capacitance of the PV modules. These leakage currents are prohibitive, since they constitute an issue for safety, reliability, protection coordination, electromagnetic compatibility, and module lifetime. This paper investigates a wide range of multi-kW range power rating TPVI topologies and classifies them in terms of their leakage current attributes. This systematic classification places most topologies under a small number of classes with basic leakage current attributes. Thus, understanding and evaluating these topologies becomes an easy task. In addition, based on these observations, new topologies with reduced leakage current characteristics are proposed in this paper. Furthermore, the important efficiency and cost determining characteristics of converters are studied to allow design engineers to include cost and efficiency as deciding factors in selecting a converter topology for PV applications.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권12호
• /
• pp.771-777
• /
• 2000

This paper deals with the design and fabrication of a novel superconducting power supply system, and characteristics have been investigated through experiments. Superconducting power supply consists of rotating and static parts, and superconducting magnet. In this experiment, superconducting foils were placed in parallel within the static part of the machine, pumping currents were measured with respect to rotor speeds and excitation currents. In addition, in order to observe the rotating flux distribution in the superconducting foils, several hall-sensors were placed in it. With the flux distribution acquired, effect of the flux on the superconducting foil during the process of current pumping has been discussed. Also, the general operational characteristics of the superconducting power supply system have been investigated on the basis of the current and voltage data, and magnetic field values acquired through the experiments.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권5호
• /
• pp.207-214
• /
• 2004

This paper presents the characteristics of transient and effective impulse impedances for deeply driven grounding electrodes used in soil with high resistivity or in downtown areas. The laboratory test associated with the time domain performance of grounding piles subjected to a lightning stroke current has been carried out using an actual-sized model grounding system. The ground impedances of the deeply driven ground rods and grounding pile under impulse currents showed inductive characteristics, and the effective impulse ground impedance owing to the inductive component is higher than the power frequency ground impedance. Both power frequency ground impedance and effective impulse ground impedance decrease upon increasing the length of the model grounding electrodes. Furthermore, the effective impulse ground impedances of the deeply driven grounding electrodes are significantly amplified in impulse currents with a rapid rise time. The reduction of the power frequency ground impedance is decisive to improve the impulse impedance characteristics of grounding systems.

• 해양환경안전학회지
• /
• 제21권5호
• /
• pp.591-598
• /
• 2015

본 연구에서는 태풍 나크리에 의한 해운대 해수욕장의 쇄파대 수리특성을 SWASH 모형을 이용하여 분석하였다. 국립해양조사원에서 제공하는 파랑관측자료를 바탕으로 태풍 나크리 내습 시의 대표파를 선정하였다. 수치모형에서 입사파는 JONSWAP Spectrum에 의한 불규칙파로 선정하였다. SWASH 모형에 의해 산정된 해빈류 패턴은 현지관측자료와 비교하였으며 수치모형에서 산정된 최대소상고는 비디오 모니터링 자료 및 경험식과 비교하였다. 최대소상고의 위치는 비디오 모니터링 자료에 나타난 파흔을 이용하여 유추하였으며 태풍 NAKRI(1412) 내습 시 S 계열의 파랑이 지배적으로 작용하였으며 동백섬측에서 미포측으로 연안류가, 해운대 해수욕장 중앙부근에서 이안류가 발생하였다. SWASH 모형을 이용하여 산정한 최대소상고(1.15 m)는 비디오 모니터링 자료(1.26 m)와 유사한 경향성을 나타냈으며 Stockdon et al.에 의해 제시된 경험식(1.33m)과 비교적 유사하게 나타났다.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.983-989
• /
• 2015

Power transformer is one of the major and key apparatus in electric power system. Monitoring and diagnosis of transformer fault is necessary for improving the life period of transformer. The failures caused by short circuits are one of the causes of transformer outages. The short circuit currents induce excessive forces in the transformer windings which result in winding deformation affecting the mechanical and electrical characteristics of the winding. In the present work, a transformer producing only the radial flux under short circuit is considered. The corresponding axial displacement profile of the windings is computed using Finite Element Method based transient structural analysis and thus obtained displacements are compared with the experimental result. The change in inter disc capacitance and mutual inductance of the deformed windings due to different short circuit currents are computed using Finite Element Method based field analyses and the corresponding Sweep Frequency Responses are computed using the modified electrical equivalent circuit. From the change in the first resonant frequency, the winding movement can be quantified which will be useful for estimating the mechanical withstand capability of the winding for different short circuit currents in the design stage itself.

• 한국항해항만학회지
• /
• 제41권2호
• /
• pp.55-62
• /
• 2017

A nearshore current or a wave-induced current is an important phenomenon in a nearshore zone, which is composed of longshore, cross-shore, and rip currents. The nearshore current is closely related to the occurrence of coastal accidents by beachgoers. A considerable number of coastal accidents by beachgoers involving the rip current have been reported at Jungmun Beach. However, in studies and observations of the nearshore current of Jungmun Beach, understanding of the rip current pattern remains unclear. In this study, a scientific approach is taken to understand the nearshore current and the rip current patterns at Jungmun Beach by numerical computation for year of 2015. From results of numerical computation, the occurrence and spatial characteristics of the rip current, and the similarities between the rip current and incident wave conditions are analyzed. The primary results of this study reveal that the rip currents are frequently generated at Jungmun Beach, especially in the western parts of the beach, and that the rip currents often occur with a wave breaking height of around 0.5 ~ 0.7 m, a wave period of around 6 ~ 8 seconds, and a breaking angle of around 0 ~ 15 degrees.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1992년도 춘계학술대회
• /
• pp.213-217
• /
• 1992

An inductively coupled magnetical signal (pulse wave, 0.7 to 60Hz, eighteen volts peak to Peak) that was applied non-invasively on the skin surface overlying the approximate site(measure position). In the group with unipolar pulse signal currents produced smaller than in the group with bipolar pulse signal. The signal was transmitted to the active coil, including a time-varying magnetic field: this in turn induced a the-varying electrical field in the field in the bone. It is very important to determine system parameters due to treatment time(healing) and the simplicity. This paper investigation was designed to compare the relative effects of pulsed unipolar currents with the effects of an identical pulsed bipolar currents. Since Inductive coupling is non-invasive and involves portable equipment, it is easy to apply and requires precise localization, it has distinct advantages and field characteristics along the bone for each different signal.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1724-1726
• /
• 2001

This paper deals with the characteristics of the potential rises of down-conductor due to lightning surge currents. Direct lightning strikes can cause high impulse currents to the lightning protection system(LPS) of a building. These high impulse currents have the front time as short as 1[${\mu}s$]. In this case, the induced voltages caused in a closed circuit inside the building can be very high and cause damage or submit people to electric hazard. So, the LPS has to be designed to ensure safety condition to person and acceptable levels of induced voltages to the electrical and electronic equipments. The results of the potential rises related to the bonding conditions between the grounding conductor and metal raceway and the type of down-conductors are introduced.