• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.4
• /
• pp.285-291
• /
• 2008

Purpose: Although automatic quantification software of myocardial perfusion SPECT provides highly objective and reproducible quantitative measurements, there is still some limitation in the direct use of quantitative measurements. In this study we derived parameters using normal variation of perfusion measurements, and tried to test the usefulness of these parameters. Materials and Methods: In order to calculate normal variation of perfusion measurements on myocardial perfusion SPECT, 55 patients (M:F = 28:27) of low-likelihood for coronary artery disease were enrolled and $^{201}TI$ rest/$^{99m}Tc$-MIBI stress SPECT studies were performed. Using 20-segment model, mean (m) and standard deviation (SD) of perfusion were calculated in each segment. As a myocardial viability assessment group, another 48 patients with known coronary artery disease, who underwent coronary artery bypass graft surgery (CABG) were enrolled. $^{201}TI$ rest/$^{99m}Tc$-MIBI stress / $^{201}TI$ 24-hr delayed SPECT was performed before CABG and SPECT was followed up 3 months after CABG. From the preoperative 24-hr delayed SPECT, $Q_{delay}$ (perfusion measurement), ${\Delta}_{delay}$ ($Q_{delay}$ - m) and $Z_{delay}$ (($Q_{delay}$ - m)/SD) were defined and diagnostic performances of them for myocardial viability were evaluated using area under curve (AUC) on receiver operating characteristic (ROC) curve analysis. Results: Segmental perfusion measurements showed considerable normal variations among segments. In men, the lowest segmental perfusion measurement was $51.8{\pm}6.5$ and the highest segmental perfusion was $87.0{\pm}5.9$, and they are $58.7{\pm}8.1$ and $87.3{\pm}6.0$, respectively in women. In the viability assessment $Q_{delay}$ showed AUC of 0.633, while those for ${\Delta}_{delay}$ and $Z_{delay}$ were 0.735 and 0.716, respectively. The AUCs of ${\Delta}_{delay}$ and $Z_{delay}$ were significantly higher than that of $Q_{delay}$ (p = 0.001 and 0.018, respectively). The diagnostic performance of ${\Delta}_{delay}$, which showed highest AUC, was 85% of sensitivity and 53% of specificity at the optimal cutoff of -24.7. Conclusion: On automatic quantification of myocardial perfusion SPECT, the normal variation of perfusion measurements were considerable among segments. In the viability assessment, the parameters considering normal variation showed better diagnostic performance than the direct perfusion measurement. This study suggests that consideration of normal variation is important in the analysis of measurements on quantitative myocardial perfusion SPECT.

• Korean journal of food and cookery science
• /
• v.25 no.4
• /
• pp.435-444
• /
• 2009

In this study, Paeonia japonica powder was extracted with ethanol, and its antimicrobial activity was investigated. The ethanol extract of the P. japonica had antimicrobial activity against Bacillus subtilis, Escherichia coli and Staphylococcus aureus. The inhibition zones of the P. japonica ethanol extract (3 mg/disc) against B. subtilis, E. coli and S. aureus were 10, 11, 8.5 mm, respectively. To test the food preservation effect of P. japonica and determine the optimal ratio of the P. japonica extract in the formulation, Sulgidduk samples were prepared with substitutions of 0, 0.25, 0.5, 0.75 and 1% P. japonica extract, and the quality characteristics of the samples were then investigated over 4 days of storage. In these experiments, total cell counts tended to decrease as the amount of added P. japonica extract increased. Moisture contents were not significantly different among the Sulgidduk samples. As the content of the P. japonica extract increased, the L-values of the samples decreased and the a- and b- values increased. In regards to the textural characteristics, the hardness, gumminess, and chewiness of the Sulgidduk samples decreased as the amount of P. japonica extract increased; however, they increased with the progression of storage time. Adhesiveness, springiness and cohesiveness were not significantly different at the different P. japonica extract concentrations and decreased with storage time. In the sensory evaluation, the control group had significantly higher scores for color, flavor and after taste as compared to the P. japonica extract added groups. When the P. japonica extract content was increased, the flavor and overall acceptability decreased, while Bakjakyak flavor, bitterness and off-flavor increased. Softness was not significantly different among the samples. In conclusion, the results indicate that substituting $0.25{\sim}1%$ P. japonica extract in Sulgidduk is optimal for quality and provides a product with reasonably high overall acceptability.

• Korean journal of food and cookery science
• /
• v.30 no.6
• /
• pp.670-678
• /
• 2014

The purpose of this study was to find the optimal swelling method and condition for seacucumber to improve its taste and texture to accomodate the rapid increase of consumption. Another purpose was to try to determine an easy way to soak dried sea-cucumber under different conditions, and identify the influence of swelling time on the texture of sea-cucumber, in order to reduce preparation time and provide basic data for easy handling. After boiling or steaming for six different periods including 5, 15, 30 and 60 minutes the texture of the sea-cucumbers were compared, For the additive test, the sea-cucumbers were boiling for 30 minutes period with 4 different additives and the textures were compared, Since the texture is an important characteristic of sea-cucumber, there are many variables that affect this property including the, drying and preservation methods. This study provides basic understanding of the influence of the heating method, time and temperature on the swelling of sea-cucumber for handy use at processing sites.

• Journal of Intelligence and Information Systems
• /
• v.22 no.2
• /
• pp.97-113
• /
• 2016

Due to the growth of internet data and the rapid development of internet technology, "big data" analysis is actively conducted to analyze enormous data for various purposes. Especially in recent years, a number of studies have been performed on the applications of text mining techniques in order to overcome the limitations of existing structured data analysis. Various studies on sentiment analysis, the part of text mining techniques, are actively studied to score opinions based on the distribution of polarity of words in documents. Usually, the sentiment analysis uses sentiment dictionary contains positivity and negativity of vocabularies. As a part of such studies, this study tries to construct sentiment dictionary which is customized to specific data domain. Using a common sentiment dictionary for sentiment analysis without considering data domain characteristic cannot reflect contextual expression only used in the specific data domain. So, we can expect using a modified sentiment dictionary customized to data domain can lead the improvement of sentiment analysis efficiency. Therefore, this study aims to suggest a way to construct customized dictionary to reflect characteristics of data domain. Especially, in this study, movie review data are divided by genre and construct genre-customized dictionaries. The performance of customized dictionary in sentiment analysis is compared with a common sentiment dictionary. In this study, IMDb data are chosen as the subject of analysis, and movie reviews are categorized by genre. Six genres in IMDb, 'action', 'animation', 'comedy', 'drama', 'horror', and 'sci-fi' are selected. Five highest ranking movies and five lowest ranking movies per genre are selected as training data set and two years' movie data from 2012 September 2012 to June 2014 are collected as test data set. Using SO-PMI (Semantic Orientation from Point-wise Mutual Information) technique, we build customized sentiment dictionary per genre and compare prediction accuracy on review rating. As a result of the analysis, the prediction using customized dictionaries improves prediction accuracy. The performance improvement is 2.82% in overall and is statistical significant. Especially, the customized dictionary on 'sci-fi' leads the highest accuracy improvement among six genres. Even though this study shows the usefulness of customized dictionaries in sentiment analysis, further studies are required to generalize the results. In this study, we only consider adjectives as additional terms in customized sentiment dictionary. Other part of text such as verb and adverb can be considered to improve sentiment analysis performance. Also, we need to apply customized sentiment dictionary to other domain such as product reviews.

• Korean Journal of Remote Sensing
• /
• v.14 no.2
• /
• pp.175-195
• /
• 1998

Automatic lineament extraction algorithms had been developed by various researches for geological purpose using remotely sensed data. However, most of them are designed for a certain topographic model, for instance rugged mountainous region or flat basin. Most of common topographic characteristic in Korea is a mountainous region along with alluvial plain, and consequently it is difficult to apply previous algorithms directly to this area. A new algorithm of automatic lineament extraction from remotely sensed images is developed in this study specifically for geological applications. An algorithm, named as DSTA(Dynamic Segment Tracing Algorithm), is developed to produce binary image composed of linear component and non-linear component. The proposed algorithm effectively reduces the look direction bias associated with sun's azimuth angle and the noise in the low contrast region by utilizing a dynamic sub window. This algorithm can successfully accomodate lineaments in the alluvial plain as well as mountainous region. Two additional algorithms for estimating the individual lineament vector, named as ALEHHT(Automatic Lineament Extraction by Hierarchical Hough Transform) and ALEGHT(Automatic Lineament Extraction by Generalized Hough Transform) which are merging operation steps through the Hierarchical Hough transform and Generalized Hough transform respectively, are also developed to generate geological lineaments. The merging operation proposed in this study is consisted of three parameters: the angle between two lines($\delta$$\beta$), the perpendicular distance($(d_ij)$), and the distance between midpoints of lines(dn). The test result of the developed algorithm using Landsat TM image demonstrates that lineaments in alluvial plain as well as in rugged mountain is extremely well extracted. Even the lineaments parallel to sun's azimuth angle are also well detected by this approach. Further study is, however, required to accommodate the effect of quantization interval(droh) parameter in ALEGHT for optimization.

• Journal of Legislation Research
• /
• no.44
• /
• pp.487-538
• /
• 2013

It is the most critical issue in recent international intellectual property licence disputes to decide the applicable laws to the license contracts. As Korea and the European Union(EU) reached free trade agreement(FTA), and the EU-Korea FTA entered into force on July 1, 2011, the FTA has boosted social, economic, cultural exchanges between the two. As a result of the increased transactions in those sectors, legal disputes are also expected to grow. This situation calls for extensive research and understanding of the choice of law principles applicable to international intellectual property license contracts in the EU. To decide the laws applicable to issues arising from international intellectual property license contracts disputes, the characterization of those issues is necessary for the purpose of applying private international law principles to them. In terms of characterization, intellectual property license contracts fall within contractual matters. In the EU, the primary rule of choice of law principles in contractual obligations is the Rome I Regulation. Because the choice of law rules, such as private international law principles, the Rome Convention(1980), and the Rome I Regulation, differ in the time of application, it is essential to clarify the time factor of related contracts. For example, the Rome I Regulation applies to contracts which were concluded as from December 17, 2009. Although party autonomy in international contracts disputes is generally allowed, if there is no choice of law agreement between the parties to the contracts, the objective test rule of private international law doctrine could be the best option. Following this doctrine, the Rome I Regulation Article 4, Paragraph 1 provides the governing law rules based on the types of contracts, but there is no room for intellectual property license contracts. After all, as the rule for governing law of those contracts, the Rome I Regulation Article 4, Paragraph 2 should be applied and if there are countries which are more closely connected to the contracts under the Rome I Regulation Article 4, Paragraph 3, the laws of those countries become the governing laws of the contracts. Nevertheless, if it is not possible to decide the applicable laws to the license contracts, the Rome I Regulation Article 4, Paragraph 4 should be applied in the last resort and the laws of the countries which are the most closely connected to the contracts govern the license contracts. Therefore, this research on the laws applicable to intellectual property license contracts under the Rome I Regulation suggests more systematic and effective solutions for future disputes in which Korea and the EU countries play the significant role as the connecting factors in the conflict of laws rules. Moreover, it helps to establish comprehensive and theoretical understanding of applying the Korean Private International Law to multifarious choice-of-law cases.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.734-744
• /
• 2011

A soil stabilization method is an effective and practical remediation alternative for arsenic (As) and heavy metal contaminated farmland soils nearby abandoned metal mine in Korea. This method is a technique whereby amendments are incorporated and mixed with a contaminated soil. Toxic metal bind to the amendments, which reduce their mobility in soil, so the successful stabilization of multi-element contaminated soil depends on the combination of critical elements in the soil and the type of amendments. The objective of this study is to investigate the treatment effects and applicability of limestone (LS) and steel refining slag (SRS) as the amendment for farmland soil contaminated with As and heavy metals, and a lab-column test was conducted for achieving this purpose. The result showed that soil treated with LS and SRS maintained pH buffer capacity and, as a result, the heavy metal leaching concentration was quite low below the water quality standard compared to untreated soil which leachate exceeding the water quality standard was observed, however, the arsenic concentration rather increased with increasing mixture ratio of SRS. This was believed to be related to phosphorus (P) contained in SRS, and dominancy in the competitive adsorption relation between As and P binding strongly to iron might be different according to soil characteristic. We suggested that LS is a effective amendment for reducing heavy metals in soil, and SRS should be used after investigating its applicability based on the adsorption selectivity of arsenic and phosphorus in selected soil.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.14 no.4
• /
• pp.63-73
• /
• 2019

Recently, as young and senior entrepreneurs are getting interested in starting a business, the domestic startup rate is gradually increasing. However, the survival rate of start-ups is so low. In this regard, this study empirically examines how the entrepreneurial intention affects both financial and non-financial start-up performances through the intermediation effects of experiential competence, financing competency, marketing competence and differentiated competitive advantage. In doing so, the purpose of this study is to find out the key elements to successful start-ups. To this end, the survey results of 200 start-ups in Pohang from January 21 to February 1, 2019 were used to test the research hypotheses. The results of the study are summarized as follows. First, it is shown that the entrepreneurial intention have a positive effect on the experiential competence, financing competence and marketing competence. Second, it is found that both experiential competence and marketing competence have significant positive effects on the differentiated competitive advantage. On the other hand, the financing competence has not been shown to have a significant effect on the differentiated competitive advantage, which might result from the characteristic of the data that most of the respondents are from new businesses. Third, it is shown that the differentiated competitive advantage has a positive effect on both financial and non-financial performances. In conclusion, the results of this study suggest a theoretical basis for the successful start-up performance. Namely, it is necessary for the founders of start-ups to secure differentiated competitive advantage through the entrepreneurial intention and the entrepreneurial competences such as financing competence and marketing competence because the differentiated competitive advantage leads to the successful financial and non-financial start-up performances. In addition, the results of this study suggest to both entrepreneurs and managers that for the successful business performance, it is important for them to make continuous efforts to come up with new ideas and to reinforce financing and marketing activities in order to achieve the differentiated competitive advantage.

• The Korean Journal of Archival Studies
• /
• no.47
• /
• pp.95-130
• /
• 2016

The job satisfaction of records managers is of importance because it affects their work performance and retention. The purpose of this study is to investigate records managers' job satisfaction and to identify factors affecting records manager's job satisfaction to find the way to improve their job satisfaction. Specific questions of the study are as follows: 1) What is the job satisfaction of records managers? 2) Are factors affecting job satisfaction different depending on record managers' personal characteristics? 3) What are the most influential factors on job satisfaction? To do that, questionnaires were used to gather data from 60 domestic records managers working in different types of records centers. Data analyses included descriptive statistics, one-way ANOVA, independent t-test, and multiple-regression analysis. Additionally, interviews with 2 record managers were conducted to collect opinions on factors affecting job dissatisfaction and recommendations for improving their job satisfaction. Important findings of the study are as follows: First, the respondents are moderately satisfied with their jobs (3.2 out of 5 points). The level of job satisfaction is different depending on years of career, years of employment, number of personnel the respondent is working with in the records center, and etc. The number of personnel the respondent is working with was found to be the most influential factor. Second, multiple-regression analysis result shows that motivation factors(satisfaction factors) are more influential than hygiene factors (dissatisfaction factors) on the respondents' job satisfaction, which confirms Herzberg's two factor theory. More specifically, 'work ethic,' one of motivator factors, has the greatest influence, followed by 'procedural impartiality', 'communication', 'job characteristic', 'distributive justice', and 'working conditions.' Based on the results, this study suggests several ways to improve record managers' job satisfaction level. First, the awareness of records management should be increased. The respondents indicated that their job dissatisfaction is usually derived from a lack of the awareness of records management. Therefore, every chief of organizations, National Archives of Korea, and records managers themselves should try to raise the awareness of records management. Especially, records managers should make stronger efforts to attract the office's attention. Second, records managers ought to establish their identity as records management profession. Also, they should participate in various activities of the archival community to overcome the limitation of individuals.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.1-7
• /
• 2021

In this paper, by embedding a bare-die chip-type drive amplifier into the PCB composed of ABF and FR-4, it implements an embedded active device that can be applied in 28 GHz band modules. The ABF has a dielectric constant of 3.2 and a dielectric loss of 0.016. The FR-4 where the drive amplifier is embedded has a dielectric constant of 3.5 and a dielectric loss of 0.02. The proposed embedded module is processed into two structures, and S-parameter properties are confirmed with measurements. The two process structures are an embedding structure of face-up and an embedding structure of face-down. The fabricated module is measured on a designed test board using Taconic's TLY-5A(dielectric constant : 2.17, dielectric loss : 0.0002). The PCB which embedded into the face-down expected better gain performance due to shorter interconnection-line from the RF pad of the Bear-die chip to the pattern of formed layer. But it is verified that the ground at the bottom of the bear-die chip is grounded Through via, resulting in an oscillation. On the other hand, the face-up structure has a stable gain characteristic of more than 10 dB from 25 GHz to 30 GHz, with a gain of 12.32 dB at the center frequency of 28 GHz. The output characteristics of module embedded into the face-up structure are measured using signal generator and spectrum analyzer. When the input power (P_in) of the signal generator was applied from -10 dBm to 20 dBm, the gain compression point (P_1dB) of the embedded module was 20.38 dB. Ultimately, the bare-die chip used in this paper was verified through measurement that the oscillation is improved according to the grounding methods when embedding in a PCB. Thus, the module embedded into the face-up structure will be able to be properly used for communication modules in millimeter wave bands.