• 제목/요약/키워드: characteristic mode

검색결과 1,080건 처리시간 0.032초

CAD를 이용한 텐세그리티 구조물의 평형응력모드 결정법 (Equilibrium Stress Mode Determination of Tensegrity Structure by CAD)

  • 김재열
    • 한국공간구조학회논문집
    • /
    • 제12권2호
    • /
    • pp.81-88
    • /
    • 2012
  • 텐세그리티 구조시스템의 한 종류인 케이블 돔 시스템은 케이블과 마스트로 이루어져 있다. 이 케이블에 외부하중이 가해지지 않은 상태에서 안정된 구조물이 되기 위하여 일정의 프리텐션이 가해져야 하며 구조물은 가해진 프리텐션 하에서 자기평형응력상태에 있어야 한다. 본 연구에서는 부재의 내력 벡터의 합 원리를 기초하여 자기평형 응력모드를 구하는 새로운 방법을 제안하였으며, 자기평형응력을 유지하기 위해 필요한 응력모드를 시각화할 수 있다는 점이 기존의 논문과 비교하여 독특성을 갖는다. 본 연구에서 제안된 방법에서 사용된 기본 원리는 모든 절점에서 외부하중이 가해지지 않은 상태에서 내력벡터의 합은 0이 되어야 한다는 것이다. 제안된 방법은 CAD를 이용하여 간단히 자기 평형응력모드를 찾을 수 있으며, 예제 케이블 돔 구조물을 대상으로 각 절점에 연결된 부재들의 내력을 결정하였다. 결과 값은 역학적 계산 방법과 기존의 이론에 의해 검증하였으며 잘 일치하였다.

인공위성 시스템을 위한 태양전지 전력조절기의 저항제어 (Resistive Current Mode Control for the Solar Array Regulator of SPACE Power System)

  • 배현수;양정환;이재호;조보형
    • 전력전자학회논문지
    • /
    • 제11권6호
    • /
    • pp.535-542
    • /
    • 2006
  • 저궤도 인공위성 전력계 시스템의 설계 및 해석을 위한 태양전지 전력조절기의 대신호 안정도해석을 수행한다. 태양전지 전력조절기에서 제어가능한 모든 방법에 따른 태양전지에서 바라본 태양전지 전력조절기의 부하특성을 분류하고, 상태공간해석을 이용하여 태양전지 시스템의 대신호적 안정도를 해석한다. 또한, 본 논문에서는 태양전지 전력조절기의 부하특성을 정전력부하에서 정저항부하로 변환하여 대신호적인 안정도를 확보하는 비선형변환을 제안한다. 제안된 변환기법을 통해 최대전력점 추적제어나 배터리 충전제어 및 전류분배제어가 가능한 병렬 모듈 태양전지 레귤레이터에 적합한 단일 전류 제어기를 구성한다. 제안된 대신호 해석과 저항제어를 검증하기위해, 200W급 태양전지와 100W급 태양전지 전력조절기 두 모듈을 병렬로 구성하여 실험하였다.

정전기장 유도된 잉크젯 프린터 헤드를 이용한 탄소나노튜브 잉크의 Drop-On-Demand 특성 연구 (The Analysis of Drop-On-Demand Characteristic of Electrostatic Field Induced Inkjet Head System with Carbon Nano Tube (CNT) Ink)

  • 최재용;김용재;손상욱;김영민;변도영;고한서;이석한
    • 전기학회논문지
    • /
    • 제56권8호
    • /
    • pp.1445-1449
    • /
    • 2007
  • This paper presents the DOD (Drop-On-Demand) characteristic using the electrostatic field induced inkjet printing system. In order to achieve the DOD characteristic of electrostatic field induced inkjet printing, applied the bias voltage of 1.4 kV and the pulse voltage of $2.0\;kV\;{\sim}\;2.7\;kV$ using high voltage pulse generator. Electrostatic field induced droplet ejection is directly observed using a high-speed camera and for investigated DOD characteristic, CNT ink used. The electrostatic field induced inkjet head system has DOD characteristic using pulse generator which can be applied pulse voltage. The bias voltage has a good condition which form meniscus and has micro dripping mode for small size micro droplet. Also, the droplet size decreases with increasing the applied pulse voltage. This paper shows DOD characteristic at electrostatic field induced inkjet head system, Therefore. electrostatic DOD inkjet head system will be applied industrial area comparing conventional electrostatic inkjet head system.

도시지역 낮.밤 대기에어로졸의 입경 별 수용성 유기탄소의 특성 (Characteristic of Size-Resolved Water-Soluble Organic Carbon in Atmospheric Aerosol Particles Observed during Daytime and Nighttime in an Urban Area)

  • 박승식;신동명
    • 한국입자에어로졸학회지
    • /
    • 제9권1호
    • /
    • pp.7-21
    • /
    • 2013
  • Twelve-hour size-resolved atmospheric aerosols were measured to determine size distributions of water-soluble organic carbon(WSOC) during daytime and nighttime, and to investigate sources and formation pathways of WSOC in individual particle size classes. Mass, WSOC, ${NO_3}^-$, $K^+$, and $Cl^-$ at day and night showed mostly bimodal size distributions, peaking at the size range of $0.32-0.55{\mu}m$(condensation mode) and $3.1-6.2{\mu}m$(coarse mode), respectively, with a predominant condensation mode and a minor coarse mode. While ${NH_4}^+$ and ${SO_4}^{2-}$ showed unimodal size distributions which peaked between 0.32 and $0.55{\mu}m$. WSOC was enriched into nuclei mode particles(< $0.1{\mu}m$) based on the WSOC-to-mass and WSOC-to-water soluble species ratios. The sources and formation mechanisms of WSOC were inferred in reference to the size distribution characteristics of inorganic species(${SO_4}^{2-}$, ${NO_3}^-$, $K^+$, $Ca^{2+}$, $Na^+$, and $Cl^-$) and carbon monoxide. Nuclei mode WSOC was likely associated with primary combustion sources during daytime and nighttime. Among significant sources contributing to the condensation mode WSOC were homogeneous gas-phase oxidation of VOCs, primary combustion emissions, and fresh(or slightly aged) biomass burning aerosols. The droplet mode WSOC could be attributed to aqueous oxidation of VOCs in clouds, cloud-processed biomass burning aerosols, and small contributions from primary combustion sources. From the correlations between WSOC and soil-related particles, and between WSOC and sea-salt particles, it is suggested that the coarse mode WSOC during daytime is likely to condense on the soil-related particles($K^+$ and $Ca^{2+}$), while the WSOC in the coarse fraction during nighttime is likely associated with the sea-salt particles($Na^+$).

가상 탐지자 배열 모델을 이용한 직사각형 판에서 A0 램파 모드 시간반전과정 모사 (Simulating a Time Reversal Process for A0 Lamb Wave Mode on a Rectangular Plate Using a Virtual Sensor Array Model)

  • 박현우
    • 한국소음진동공학회논문집
    • /
    • 제20권5호
    • /
    • pp.460-469
    • /
    • 2010
  • This paper presents the analysis of a time reversal process for $A_0$ Lamb wave mode($A_0$ mode) on a rectangular plate. The dispersion characteristic equation of the $A_0$ mode is approximated using the Timoshenko beam theory. A virtual sensor array model is developed to consider the effects of reflections occurring on the plate boundary on the time reversal process. The time reversal process is formulated in the frequency domain using the virtual sensor array model. The reconstructed signal is obtained in the time domain through an inverse fast Fourier transform. The validity of the proposed method is demonstrated through the comparison to the numerical simulation results computed by the finite element analysis.

디젤 승용차량 시험모드별 극미세입자 배출 특성 해석 (Analysis of Diesel Nano-particle Characteristics for Different Vehicle Test Mode in Diesel Passenger Vehicle)

  • 이진욱;정민원;정용일;차경옥
    • 한국자동차공학회논문집
    • /
    • 제16권1호
    • /
    • pp.114-120
    • /
    • 2008
  • Recently, the nano-PM's number concentration emitted by diesel internal combustion engine has focused on attention because this particulate matters are suspected being hazardous of human health. In this study, The nano-PM mass and size of diesel passenger vehicles were measured on chassis dynamometer test bench. The particulate matters(PM) emissions of these vehicles were investigated by number concentration too. A condensation particle counter(CPC) system was applied to measure the particle number and size concentration of diesel exhaust particles at the end of dilution tunnel along the NEDC(ECE15+EUDC) and CVS-75 vehicle test mode. As the research result, the characteristic of vehicle test mode on the diesel nano-particle number and size distribution was investigated in this study.

상·하측 대역의 대역폭 조절이 가능한 이중 대역 대역 통과 필터 설계 (A Design of the Dual-Band Bandpass Filter Using a Coupling Controllable Dual-Mode Resonators)

  • 표현성;안재민;김경근;임영석
    • 한국전자파학회논문지
    • /
    • 제22권1호
    • /
    • pp.9-15
    • /
    • 2011
  • E 모양의 이중 모드 공진기를 변형하여 상.하측 대역의 대역폭 조절이 가능한 이중 대역 통과 필터를 설계 제작하였다. 변형된 E 모양의 이중 모드 공진기를 이용하여 even 모드 간의 결합이 odd 모드 공진점에 영향을 미치지 않게 만들었고, 이를 통하여 상측 대역의 대역폭을 효과적으로 조절할 수 있다. 그리고 급전 선로간의 결합을 통하여 차단 대역에 전송 영점을 발생시켜 차단 특성을 높였다. 대역폭 조절이 가능함을 보이기 위해 중심 주파수 2 GHz와 3 GHz에서 140 MHz의 동일한 대역폭을 갖는 필터를 설계하였다.

A FAST INTRA PREDICTION MODE SELECTION METHOD IN H.264/AVC SCALABLE VIDEO CODING

  • Park, Sung-Jae;Lee, Yeo-Song;Sohn, Chae-Bong;Jeong, S.Y.;Chung, Kwang-Sue;Park, Ho-Chong;Ahn, Chang-Bum;Oh, Seoung-Jun
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 2009년도 IWAIT
    • /
    • pp.170-173
    • /
    • 2009
  • In this paper, we propose a fast intra prediction mode selection method in Scalable Video Coding(SVC) which is an emerging video coding standard as an extension of H.264/Advanced Video Coding(H.264/AVC). The proposed method decides a candidate intra prediction mode based on the characteristic of macroblock smoothness. Statistical analysis is applied to computing that smoothness in spatial enhancement layer. We also propose an early termination scheme for Intra_BL mode decision where the RD cost value of Intra_BL is utilized. Compared with JSVM software, our scheme can reduce about 55% of the computation complexity of intra prediction on average, while the performance degradation is negligible; For low QP values, the average PSNR loss is very negligible, equivalently the bit rate increases by 0.01%. For high QP values, the average PSNR loss is less than 0.01dB, which equals to 0.25% increase in bitrate on average.

  • PDF

Empirical mode decomposition based on Fourier transform and band-pass filter

  • Chen, Zheng-Shou;Rhee, Shin Hyung;Liu, Gui-Lin
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제11권2호
    • /
    • pp.939-951
    • /
    • 2019
  • A novel empirical mode decomposition strategy based on Fourier transform and band-pass filter techniques, contributing to efficient instantaneous vibration analyses, is developed in this study. Two key improvements are proposed. The first is associated with the adoption of a band-pass filter technique for intrinsic mode function sifting. The primary characteristic of decomposed components is that their bandwidths do not overlap in the frequency domain. The second improvement concerns an attempt to design narrowband constraints as the essential requirements for intrinsic mode function to make it physically meaningful. Because all decomposed components are generated with respect to their intrinsic narrow bandwidth and strict sifting from high to low frequencies successively, they are orthogonal to each other and are thus suitable for an instantaneous frequency analysis. The direct Hilbert spectrum is employed to illustrate the instantaneous time-frequency-energy distribution. Commendable agreement between the illustrations of the proposed direct Hilbert spectrum and the traditional Fourier spectrum was observed. This method provides robust identifications of vibration modes embedded in vibration processes, deemed to be an efficient means to obtain valuable instantaneous information.

TN 모드와 FFS 모드에서 Pretilt Angle이 전기 광학 특성 및 동력학 안정성에 미치는 영향에 관한 연구 (Study on Electro-optic Characteristics and Dynamic Stability Depending on the Pretilt Angle for the Twisted Nematic(TN) and Fringe-field Switching(FFS) Mode)

  • 김미숙;정연학;김향율;김서윤;이승희
    • 한국전기전자재료학회논문지
    • /
    • 제17권11호
    • /
    • pp.1234-1240
    • /
    • 2004
  • We studied on the electro-optic characteristics and dynamic stability according to an undesirably defined pretilt angle induced in high step coverage of pixel area for the Twisted Nematic (TN) / Fringe-Field Switching (FFS) mode. In case of the TN mode, LC directors twist reversely near the edges of thin-film-transistor and black matrix where the pretilt angle of the LC is not well defined. Therefore, the voltage-dependent dynamics of the LC in TN mode is unstable and shows the bad electro-optic characteristics. On the other hand, in case of the FFS mode, the LCs are twisted parallel to the bottom substrate by fringe electric field and the electro-optic characteristic is not influenced by the pretilt angle of the LC which is not well defined.