• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.4
• /
• pp.381-387
• /
• 2007

The excellent dielectric properties of $SF_6$(sulfur hexafluoride) have lead to its wide range of application in the field of high voltage insulation. Because there has been some recent concern regarding the environmental impacts of $SF_6$ binary gas mixtures, with $SF_6$ as the main component, have been the subject of active research. Scientists have long been interested in the possible use of gaseous fluorocarbons, including $CF_4$ (Carton Tetrafluoride), in high voltage applications due to their inert character and high dielectric strength. This paper presents experimental results concerning the AC breakdown characteristics lot various mixtures of $SF_6/CF_4$ in a test chamber and 25.8 kV GIS (Gas Insulation Switchgear) at practical pressures (0.1-04 MPa) and gap lengths (0.5 mm, 1 mm) in a test chamber. In the result, it was observed that an increase in the dielectric strength is attained through the addition of $SF_6$ to $CF_4$. It is possible to make an environment friendly gas insulation material while maintaining the dielectric strength by combing $SF_6$ and $CF_4$ which generates a lower level of the "global warming" effect.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.463-469
• /
• 1998

Factor analysis was applied as a multivariate statistical technique to official genetic evaluations of type classification traits for 1,265,785 Holstein cows and 10,321 sires computed from data collected between August 1982 and June 1994 in Canada. Type traits included eighteen linear descriptive traits and eight major score card traits. Principal components of the factor analysis showed that only five factors explain the information of the genetic value of linear descriptive traits for both cows and sires. Factor 1 included traits related to mammary system, like texture, median suspensory, fore attachment, fore teat placement and rear attachment height and width. Factor 2 described stature, size, chest width and pin width. These two factors had a similar pattern for both cows and sires. In constrast, Factor 3 for cows involved only bone-quality, while in addition for sires, Factor 3 included foot angle, rear legs desirability and legs set. Factor 4 for cows related to foot angle, set of rear leg and leg desirability, while Factor 4 related to loin strenth and pin setting for sires. Finally, Factor 5 included loin strength and pin setting for cows and described only pin setting for sires. Two factors only were required to describe score card traits of cows and sires. Factor 1 related to final score, feet and legs, udder traits, mammary system and dairy character, while frame/capacity and rump were described by Factor 2. Communality estimates which determine the proportion of variance of a type trait that is shared with other type traits via the common factor variant were high, the highest ${\geq}$ 80% for final score, stature, size and chest width. Pin width and pin desirability had the lowest communality, 56% and 37%. Results indicated shifts in emphasis over the twelve-year period away from udder traits and dairy character, and towards size, scale and width traits. A new system that computes fmal score from type components has been initiated.

• The Korean Journal of Community Living Science
• /
• v.17 no.2
• /
• pp.3-14
• /
• 2006

This study intends to offer suggestions for improving the security and competitive power of traditional liquors by investing in the status of intellectual property rights. Merchandising and the marketing strategies of traditional liquor are also addressed. The data was collected through a questionnaire survey given to 101 CEOs of traditional liquor manufacturers. The major results of this study were as follows: The management types of traditional liquor manufacturers were classified as the company 57 (56.4%), the corporation or the union 29 (28.7%), domestic industry 10 (9.9%), and marketing community or technology center 5 (5.0%). The competitive power degree of traditional liquor products was classified as strength 30 (31.6%), usual 30 (31.6%), weakness 35 (36.8%). The elements of strong competitive power were taste, functional (wellbeing) character, and attractiveness of the brand name. On the other side, reasons for weakness in competitive power were the marketing system, price competitiveness, and advertisement. The trademark registration of the traditional liquor appeared with 53%. The reasons not to pursue a trademark registration included the complicated and unnecessary process of registration acquisition, high registration expenses, etc. The perceptions of CEOs about the consumer's brand awareness for their product were low with an average 2.97. Explanations included insufficient advertisement and public relations, unrefined trademark design, and the meaninglessness of brand names. The marketing strategy of traditional liquor manufacturers according to annual sales were as follows: Manufacturers with high sales emphasized marketing strategies that focused on functional character, traditional image, high quality in image and package materials and design, high price strategies based on quality, and various sale promotions.

• Journal of Korean Medical classics
• /
• v.13 no.1
• /
• pp.328-344
• /
• 2000

YoungChu NonYong(靈樞 論勇)seems to be named as such by its explanation in detail about the brave man who can and the coward who cannot stand pain respectively. In the first chapter, it is considered that the factors of diseases are dependent upon the state of skin and flash. In the second chapter, it is put about the problem of standing pain and not. In the third chapter, about the causes of resulting in brave or unbrave man. And in the fourth chapter, about drunken frenzy(酒悖). More concretely speaking, in the first chapter, it is explained that the factors of pathogenesis are related closely with the state of skin and flash, so to speak, though the outer factors which can arouse diseases should exist, the sensitivity of skin and flash which are the first defense tissue in human body, is more important factor. Undoubtedly, the environmental factors existing in physical nature which surrounds human life, have influenced upon human health, especially in ancient times. But, this chapter exhibits some reflections that ultimately the inner conditions of human body decide the attack of diseases. However, this chapter may have some corruptions for it reveals the contents which are not fit with the headline. In the second chapter, it is written that the sensitivity to pain is not only dependent upon the character of bravery but also upon the thickness of skin, the strength of flesh and the speed of response. In this we evidence that the ancient people had the idea that human pain-feeling is more dependent upon the degree of development of sensory neuron of physical body than one's character of bravery. In the third chapter, ti is described that the differences of physical development mainly influence the differences of the degree of mental bravery. In the fourth chapter, the drunken frenzy is explained. The implication is that as civilization has been growing, the drinking culture has made both in dividual and social health affair. The alcohol has the function of pleasing mind improving the quality of human life but it can also destroy both human body and mind when abused. About the harms like this, this part wams by the examples of drunken man's abnormal behaviors.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4223-4238
• /
• 2011

The advantages of grouting are the simple instrument, the simple procedure of practice and the simple verification of grouting result. but the more grouting practice there is, the more damages of environment from grouting practice and grouting materials there are. so, the grouting materials and methods with the character of environment friendly are introduced in construction field, recently. This paper is to study of the physical characteristics that has thixotropic character and that consists of inorganic and polycarboxylate co-polymer. In study, various testing methods are performed such as a viscosity, a thixotropy, a compressive strength, a heavy metal detection and pH measurement in lab test and a low pressure injection test and a high pressure injection test in field with different soil type. As a result, a optimum mix ratio is proposed by analyzing the result of lab test. the field applicability is verified by checking a injection pressure, a grout volume and a hardened body of grout by excavating the practice site.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.1
• /
• pp.1-10
• /
• 1982

Degree of grain shattering which is of varietal character is an important determinant for the magnitude of field loss of grains during harvest and threshing. Seven Indica \times Japonica progeny varieties and four Japonica varieties were subjected to measurements of tensile strength of grains, degree of grain shattering when panicles were dropped at 1.5m above concrete floor, and moisture content of grains (wet basis) during a period 35 to 63 days after heading. In addition, two varieties were tested for the relation of tensile strength of grains to the magnitude of field loss of grains in actual binder harvest. The 11 varieties differed conspicuously in tensile strength of grains and the degree of grain shattering: the weakest average tensile strength of grains of a variety was about 90g and the strongest about 250g with varying standard deviation of 30 to 60g. Three Indica \times Japonica varieties and one Japonica variety shattered I to 30% of the grains under the falling test. The threshold tensile strength of grains allowing grain shattering was estimated to be 180g on average for a sampling unit of 10 panicles, but only the grains having tensile strength weaker than 98g within the samples shattered. A decrease in average tensile strength by 10g below the threshold value corresponded to an increase of 3 to 5% in grain shattering. Most varieties did not change appreciably the tensile strength of grains and degree of grain shattering with delay in time of harvest and showed a negative correlation between the tensile strength and the moisture content of grains. The average tensile strength of grains was negatively correlated linearly with field loss in binder harvest. The average tensile strength for zero field loss in binder harvest was estimated to be 174g and a decrease in the average tensile strength by 10g corresponded to an increase of 40kg per hectare in field loss of grains. Instead of the average tensile strength of grains, the percentage of grains having tensile strength weaker than 100g is recommended as a criterion for the estimation of field loss of grains during harvesting operations as well as a basis of variety classification for grain shattering, since the standard deviation of tensile strength of grains varies much with variety and time of harvest, and individual grains having tensile strength stronger than 98 did not shatter practically.

• Journal of Sasang Constitutional Medicine
• /
• v.18 no.1
• /
• pp.30-40
• /
• 2006

1. Objectives The present study purposed to examine the contents and the principles of music therapy according to Oriental medicine theories in order to prove that music therapy is not a new research area but its principle is found in the long tradition of Oriental medicine. 2. Methods We investigate the possibility of music therapy based on Oriental medicine theories and examine the meanings of music therapy from the viewpoint of Oriental medicine. 3. Conclusions and discussions (1) The principles of music therapy are the principle of homogeneity, catharsis and balance. (2) When one’s mind changes, there are naturally occurred sounds, which are called Oseong (五聲: the oriental five voices exhalation, laughing, singing, wailing and groaning), and the notes defined by arranging the Oseong according to the principle of Ohaeng (五行: the oriental five phases wood, fire, earth, metal, water) are Oheum (五音: the oriental five musical notes Gakeum, Chieum, Gungeum, Sangeum and Wooeum.). If Eum (musical notes) is classified into Ohaeng, it can be divided into Gakeum, Chieum, Gungeum, Sangeum and Wooeum. (3) Change of Sinji (神志: consciousness) induces change of Gigi (氣機: function of Gi), which can change the character of voices. Oseong controls the functions of Ojang (五臟: the oriental five viscera) by ruling one’s Jeongji (情志: emotion). It can reduce the damage of the viscera caused by excessive vent of emotion resulted from unconscious expression of Oseong - Hoseong (呼聲: exhalation), Soseong (笑聲: laughing), Gaseong (歌聲: singing), Gokseong (哭聲: wailing) and Sinseong (呻聲: groaning). (4) Yijeongseungjeong (以情勝情: Control emotion with emotion) therapies, which suppresses an emotion by stimulating another, include Noseungsabeop (怒勝思法: Control anxiety with anger), Heeseungbibeop (喜勝悲法: Control sorrow with joyfulness), (思勝恐法: Control fear with anxiety), Biseungnobeop (悲勝愁法: Control anger with sorrow) and Gongseungheebeop (恐勝喜法: Control joyfulness with fear). (5) Seongeum (聲音: voices and musical notes) can be applied to a stimulation method that not only harmonizes the rhythm of living organs but also controls the occurrence of diseases caused by mutual Pyeonseongpyeonsoi (偏盛偏衰: relative preponderance and weakness) through direct induction of the strength and weakness of Gi function of the oriental five viscera in a human body according to the individual character. Sounds preferred by the patient, the material of an instrument selected by the patient, the character of rhythm and music expressed by the patient and the sound or voice uttered frequently by the patient can be considered in diagnosis and treatments for the patient’s body and mind.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.4
• /
• pp.259-272
• /
• 2002

This study was tried to interpret the important major factors controlling some physicochemical properties by comparing mineralogical and physicochemical characteristics such as pH, cation exchange capacity, Methylene Blue adsorption amount, swelling, viscosity, strength (compressional and tensile), and surface area etc. Investigated bentonite samples are five Korean samples from Dusan, Naa, Oksan, Dongyang, and Yeonil deposits and two Japanese bentonites from Tsukinuno and Tomioka deposits which were formed under a similar geological environment of the Tertiary basin. Tsukinuno bentonite is only natural Na-type bentonite and the others are all Ca-type bentonites. Most of the properties are not explained by the montmorillonite content only though the most important factor controlling the physicochemical properties is the montmorillonite content. The layer charge of montmorillonite will strongly control cation exchange capacity and Methylene Blue adsorption. Zeolite bearing bentonites show the strong alkaline character and causes the increase of cation exchange capacity, however decrease swelling, viscosity and strengths. Pyrite bearing bentonites decrease green compressional strength and wet tensile strength. The exchangeable interlayer cations control some physicochemical properties. Na-type bentonite than Ca-type shows more strong alkaline character and much more advanced swelling and viscosity. Also the size and thickness of montmorillonite flakes seem to control some physicochemical properties. Bentonite mainly composed of montmorillonite of very thin and large flakes is characterized by the very high surface area, cation exchange capacity, viscosity, swelling, Methylene Blue adsorption, green compressional strength and wet tensile strength. Domestic Dusan bentonite shows the most excellent physicochemical properties, which is due to the high content(84%) and very well crystallinity of montmorillonite.

• Journal of Bio-Environment Control
• /
• v.6 no.4
• /
• pp.299-309
• /
• 1997

This experiment was conducted to determine the mineral absorption character and develop the optimum composition of nutrient solution for dill(Anethum graveolens L.) in hydroponics. Dill(Anethum graveolens L.) plants were grown in nutrient film technique(NFT) supplied with 1/4, 1/2, and 1 strength of the nutrient solution developed by National Research Station in Japan(HRS). Plants grown in 1/2 strength showed the best growth in plant height, fresh weight, and dry weight compared with those grown in 1/4 or 1 strength. In 1/2 strength solution, pH and EC changed little and proper nutrient contents were observed in the leaves as compared to plant nutrient diagnosis standard. Based on these results, optimum macronutrients were composed by nutrient- water absorption rate(n/w) with 1/2 strength: NO$_2$―N 8.85, NH$_4$―N 0.55, P 2.1, K 6.2, Ca 2.8, and Mg 1.7 me L$^{-1}$ To examine the suitability of the nutrient solution developed(SCU) , dill plants were grown in NFT supplied with two different kinds of solution and concentration. 1/2, 1, 3/2 and 25 of SCU and 1/2S of HRS. Changes of pH and EC were not distinct in 1S, but a significant change of pH was shown in low concentrations-HRS 1/2S and SCU 1/2S. Shoot fresh and dry weight were much higher in the plants grown in SCU IS as compared with HRS 1/2S. There were no significant differences in growth of plants grown in SCU IS, 3/2S, and 25. In addition, nutrient contents in the leaves grown by SCU 1S were in proper levels as compared with plant nutrient diagnosis standard. SCU 1S developed in this experiment was found to be optimum for dill in hydroponics.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.97-105
• /
• 2016

Recently, application case of the ultra rapid hardening concrete-polymer composite(URHCPC) are increasing to repair for the deterioration of pavement. But it is a major disadvantage that the main material is expensive and has environmental load. For these reasons, the development of the economic, eco-friendly materials is needed. Calcium Aluminate Composite (CAC), produced by rapid cooling of atomizing method with molten ladle furnace slag, is a material capable of improving the economic feasibility and reducing the environmental load of URHCPC. In this paper, the properties of CAC and gypsum mixed CAC (GC) as alternative materials of RSC according to the types of polymer dispersion were studied. The results were as follows; compressive strength, tensile strength, flexural strength, bonding strength and modulus of elasticity of the composites using CAC or GC showed higher values than those of plain proportion in 3 hour. In later age, they were at the same level as the general proportions. URHCPC using BPD as polymer dispersion had superior strength properties generally. But modulus of elasticity was the same level as the case of using a SBR latex. According to these results, CAC or GC can partially substituted for RSC to product the URHCPC. When URHCPC uses the BPD as the polymer dispersion, it can be improved performance.