• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.504-511
• /
• 2018

In Lithuania, all spent nuclear fuel (SNF) resulted from the operation of the Ignalina Nuclear Power Plant (INPP), which had two Russian Acronym for "Channelized Large Power Reactor"-type reactors. After the final shutdown, the total amount of SNF at the INPP was approximately 22,000 fuel assemblies. All these assemblies will be stored for about 50 years and disposed of after that. The decision to shut down and decommission both reactors in Lithuania before termination of design period raises a significant challenge for the treatment of accumulated SNF. Therefore, various techniques and technologies for SNF management were developed and justified for that specific case, and a set of special equipment was installed at the INPP, the effectiveness of which was demonstrated during its operation. This article presents unique techniques related to the management of SNF adopted and commissioned at the INPP after its operation shutdown, namely fuel rod cladding leak tightness control system and special equipment for collection of possible spillage during handling of SNF assembly in the hot cell. The operational experience and measurement results of fuel rod cladding leak tightness control system are presented.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.826-833
• /
• 2004

Cascade impactors are widely used to collect size classified aerosol. A major disadvantage of this instrument is the required long sampling time. Electrical low pressure impactor has been developed to overcome this disadvantage and to achieve real-time measurements on the particle size distribution. The instrument consists primarily of a corona charger, low pressure cascade impactor and multi channel electrometer. We designed and evaluated the performance of a potable 3-stage low pressure impactor using an electrical method. For the calibration of the impactor, monodispersed particles were generated using evaporation-condensation method followed by electrostatic classification using a DMA(Differential Mobility Analyzer). The collection efficiency curves of the stages can be determined by analysing the fraction of particles collected by each stage.

• 대한인간공학회지
• /
• 제18권1호
• /
• pp.13-24
• /
• 1999

The objective of the study is to discriminate EEG(electroencephalogram) due to emotional changes. Emotion was evoked by the series of auditory stimuli which were selected from the natural sounds in the sound effect collection of compact disc. Seventeen university students participated and experienced positive or negative emotions by six auditory stimuli with intermission between stimuli. Temporal EEG ($T_3$, $T_4$, $T_5$, and $T_6$) was recorded at the same time and a subjective test was performed on the eleven point scales after the experiment. The maximum and minimum scores of the EEG among six stimuli EEG were analyzed for discrimination of emotion. The EEG signals were transformed into feature objects based on scalar intervention model coefficients. Auditory stimulus was considered as intervention variable. They were classified by Discriminant Analysis for each channel. The features showed results with the best classification accuracy of 91.2 % in $T_4$ for auditory stimuli. This study could be extended to establish an algorithm which quantifies and classifies emotions evoked by auditory stimulus using time-series models.

• Asian Journal of Business Environment
• /
• 제7권4호
• /
• pp.27-33
• /
• 2017

Purpose - The paper aims to explore the critical and uncover issues encountered to the supply-chain companies in launching halal based services in India. Research design, data, and methodology - After a meticulous review of relevant literature on the halal concept and halal logistics, researchers involved in a data collection by conducting semi-structured focus group interviews. Four groups with a maximum of 5 members each have chosen from the areas of transportation, warehousing, certification, and packaging. A total of 20 questionnaires were collected by applying purposive sampling method. Results - More than 95 percent of the chosen focus groups agreed that they know only about halal but don't have any exposure to halal logistics. The discussion has revealed that the adoption rate for halal transportation, warehousing, halal certification, and packaging is almost zero. The respondents were chosen only from transportation, warehousing, certification and packaging companies from south India which are operating throughout India. This research never attempts to be acquainted with the opinions of channel members who directly or indirectly involved in meeting customer demands. Conclusions - This is a ground-breaking effort aimed to study the critical issues related to Indian halal logistics which is beneficial to both logistic companies as well as to the academic world.

• 유통과학연구
• /
• 제20권7호
• /
• pp.107-117
• /
• 2022

Purpose: The scope of forensic investigations serves to identify malicious activities, including leakage of crucial corporate information. The investigations also identify security lapses in available networks. The purpose of the present study is to explore how to block distribution channels to protect illegal leakage in supply chain through digital forensic method. Research design, data and methodology: The present study conducted the qualitative textual analysis and its data collection process entails five steps: identifying and collecting data, determining coding categories, coding the content, checking validity and reliability, and analyzing and presenting the results. This methodology is a significant research method due to its high quality of previous resources. Results: Applying previous literature analysis to the results of this study, the author figured out that there are four solutions as an evidences to block distribution channels, preventing illegal leakage regarding company information. The following subtitles show clear solutions: (1) Communicate with Stakeholders, (2) Preventing and addressing illegal leakage, (3) Victims of Data Breach, (4) Focusing Solely on Technical Teams. Conclusion: There are difficult scenarios that continue to introduce difficult questions surrounding engagement with digital evidence. Consequently, it is important to enhance data handling to provide answers for organizations that suffer due to illegal leakages of sensitive information.

• 한국정밀공학회지
• /
• 제24권10호
• /
• pp.54-63
• /
• 2007

To measure water levels from remote cites using a narrowband channel, this paper developed a difference image based JPEG communication scheme and a water level measurement scheme using the sparsely sampled images in time domain. In the slave system located in the field, the images are compressed using JPEG after changed to difference images, among which in a period of data collection those showing larger changes are sampled and transmitted. To measure the water level from the images received in the master system which may contain noises caused by various sources, the averaging scheme and Gaussian filter are used to reduce the noise effects and the Y axis profile of an edge image is used to read the water level. Considering the wild condition of the field, a simplified camera calibration scheme is also introduced. The implemented slave system was installed at a river and its performance has been tested with the data collected for a month.

• 한국산업융합학회 논문집
• /
• 제23권6_2호
• /
• pp.1025-1032
• /
• 2020

In this paper, we propose a method to classify road weather conditions into rain, fog, and sun using a SVM (Support Vector Machine) classifier after extracting weather features from images acquired in real time using an optical sensor installed on a roadside post. A multi-dimensional weather feature vector consisting of factors such as image sharpeness, image entropy, Michelson contrast, MSCN (Mean Subtraction and Contrast Normalization), dark channel prior, image colorfulness, and local binary pattern as global features of weather-related images was extracted from road images, and then a road weather classifier was created by performing machine learning on 700 sun images, 2,000 rain images, and 1,000 fog images. Finally, the classification performance was tested for 140 sun images, 510 rain images, and 240 fog images. Overall classification performance is assessed to be applicable in real road services and can be enhanced further with optimization along with year-round data collection and training.

• 유통과학연구
• /
• 제21권5호
• /
• pp.93-102
• /
• 2023

Purpose: This study aims to investigate a meaningful connection between the service supply chain and the power to influence potential customers for airline booking. This investigation will cover various topics, including customer service, product quality, and marketing strategies. Additionally, the literature review will examine the various strategies and tactics airlines use to influence customer behavior. Research design, data, and methodology: The data collection process conducted by the author could obtain the justification and establish the quality of the instrument between independent factor (Service Supply Chain) and dependent factor (Power to Influence Potential Customers), selecting peer-reviewed articles mostly for the current study. Results: The findings section thoroughly studied the research findings indicating a potential link between service supply chain management and the ability to persuade potential consumers to book an airline. The research findings will be explored concerning the numerous variables that may affect customers' decision-making in the airline business, the techniques used by airlines to sway consumers. Conclusions: The research has provided evidence that airlines use a variety of strategies to influence potential customers and that these strategies are generally successful in increasing customer loyalty and satisfaction, as well as sales. By utilizing these strategies, airlines can increase their customer base and profitability.

• 한국산림과학회지
• /
• 제71권1호
• /
• pp.1-8
• /
• 1985

본(本) 연구(硏究)는 국내재(國內材) 유통시장(流通市場)을 파악(把握)하고 유통개선방법(流通改善方法) 제시(提示)하고자 지역별(地域別) 유통주체자별(流通主體者別)로 가격형성과정(價格形成過程)을 조사(調査)하였다. 그 결과(結果) 국내재(國內材) 유통경로(流通經路)는 타농산물(他農産物)에 비(比)하여 비교적(比較的) 단순(單純)하였으며 벌채산주(伐採山主)외 대부분(大部分)이 유통정보(流通情報)에 어두워 산지시장(山地市場)은 벌출상(伐出商)이 주도권(主導權)을 갖고 있었다. 그러나 벌출상(伐出商)외 대부분(大部分)은 사업량(事業量)이 작고, 본인자본율(本人資本率)이 낮아 영세성(零細性)을 탈피하지 못하므로 자금력(資金力)을 갖춘 수집상(蒐集商)에게 중간유통시장(中間流通市場)외 주도권(主導權)을 넘겨주고 있었다. 이와 함께 목재(木材) 유통시장(流通市場)의 거래검척방법(去來檢尺方法)이 다양함은 유통시장(流通市場)을 더욱 혼란(混亂)시키는 원인(原因)이 되고 있다. 따라서 다음과 같이 제안(提案)하였다. 1) 산주(山主)에 대(對)한 유통시장정보(流通市場情報)의 적극적인 홍보(弘報), 2) 벌출상(伐出商)의 양성화(陽性化), 3) 벌출상(伐出商)을 집단화(集團化)한 계통출하(系統出荷), 4) 생산재질(生産材質)의 우량화(優良化).

• 설비공학논문집
• /
• 제23권6호
• /
• pp.449-469
• /
• 2011

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering during 2010. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery, and new and renewable energy. Various topics were presented in the field of general thermal and fluid flow. Research issues mainly focused on the thermal reliability of axial fan and compressor in the field of fluid machinery. Studies on the design of ground source heat pump systems and solar chemical reactors were executed in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (3) Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and CO2 were studied. Performance improvement of refrigeration systems are tried applying various ideas of refrigerant subcooling, dual evaporator with hot gas bypass control and feedforward control. The hybrid solar systems combining the solar collection devices with absorption chillers or compression heat pumps are simulated and studied experimentally as well to improve the understanding and the feasibility for actual applications. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. Various studies on heating and cooling systems, HVAC facilities, indoor air environments and energy resources were carried to improve the maintenance and management of building service equipments. In the field of heating and cooling systems, papers on a transformer cooling system, a combined heat and power, a slab thermal storage and a heat pump were reported. In the field of HVAC facilities, papers on a cooling load, an ondol and a drying were presented. Also, studies on HVAC systems using unutilized indoor air environments and energy resources such as air curtains, bioviolence, cleanrooms, ventilation, district heating, landfill gas were studied. (5) In the field of architectural environment and energy, studies of various purposes were conducted such as indoor environment, building energy, renewable energy and green building. In particular, renewable energy and building energy-related researches have mainly been studied reflecting the global interest. In addition, many researches which related the domestic green building certification of school building were performed to improve the indoor environment of school.